Kinko Yo

Trying to understand the relevance of the values linked to ichimoku, I tried several experiments that I transmit as a cloud or a colored line

By applying the highest and lowest 9, I observed that it could indicate small corrections or small range before their appearance, this is explained by the effect of over-purchase or overselling, you can then see a small cloud stuck to the kijun when this “elastic” effect appears,

By applying the highest and lowest 26, I observed that it could indicate strong corrections or large range before their appearance, this is explained by the effect of overbought or oversold :), you can then see an orange cloud appearing.

Also on the image, you can see the Kijun becoming Orange, this coloration appears when the Kijun and the Tenkan are glued and horizontal, the movements that follow are often uncertain…

When the Kijun turns Red, the Kijun and the Real SSB are glued and horizontal, the movements that follow are very erratic!

The main picture shows this information quite clearly.

I know we have our favorite colors!
That’s why at the beginning of the code, you have a panel that allows you to modify the color codes with information to know which code corresponds to which color .

Update link and discussions: https://www.prorealcode.com/topic/discution-et-maj-indicateur-kinko-yo/

//
//=/===============/=//=/===============/=//=/ Paramettre de Base
//


defparam calculateonlastbars = 2000

//
//=/===============/=//=/===============/=//=/ Paramettre des couleurs
//

//
//=/ = = Tenkan
//

//=/ Tenkan Hausse
UPxT1 = 0
UPxT2 = 150
UPxT3 = 255
UPxT4 = 200

//=/ Tenkan Baisse
DWxT1 = 102
DWxT2 = 102
DWxT3 = 102
DWxT4 = 200

//=/ Tenkan Anormalité
ANxT1 = 255
ANxT2 = 102
ANxT3 = 0
ANxT4 = 250

//
//=/ = = Kijun
//

//=/ Kijun Hausse
UPxK1 = 0
UPxK2 = 150
UPxK3 = 255
UPxK4 = 200

//=/ Kijun Baisse
DWxK1 = 102
DWxK2 = 102
DWxK3 = 102
DWxK4 = 200

//=/ Kijun Anormalité Type 1
A1xK1 = 255
A1xK2 = 102
A1xK3 = 0
A1xK4 = 250

//=/ Kijun Anormalité Type 2
A2xK1 = 204
A2xK2 = 0
A2xK3 = 0
A2xK4 = 250

//
//=/ = = Excès Tenkan
//

//=/ Excès Haussier
EHxT1 = 0
EHxT2 = 150
EHxT3 = 255
EHxT4 = 30

//=/ Excès Baissier
EBxT1 = 102
EBxT2 = 102
EBxT3 = 102
EBxT4 = 30

//
//=/ = = Excès Kijun
//

EKxT1 = 255
EKxT2 = 102
EKxT3 = 0
EKxT4 = 30

//
//=/===============/=//=/===============/=//=/ Indicateur
//

//=/ Ichimoku
Hx1 = highest[9](high)
Lx1 = lowest[9](low)
//=//
Hx2 = highest[26](high)
Lx2 = lowest[26](low)
//=//
Hx3 = highest[52](high)
Lx3 = lowest[52](low)
//=//
XB = (Hx3+Lx3)/2
XA = (Hx1+Lx1+Hx2+Lx2)/4
//=//
SA = (XA[26])
SB = (XB[26])
TK = (highest[9](high)+lowest[9](low))/2
KJ = (highest[26](high)+lowest[26](low))/2

//
//=/===============/=//=/===============/=//=/ Tenkan
//

//=/ UP
if TK > KJ then
Rx1 = UPxT1
Gx1 = UPxT2
Bx1 = UPxT3
Tx1 = UPxT4
elsif TK = KJ and TK > TK[1] then
Rx1 = UPxT1
Gx1 = UPxT2
Bx1 = UPxT3
Tx1 = UPxT4

//=/ Down
elsif TK < KJ then
Rx1 = DWxT1
Gx1 = DWxT2
Bx1 = DWxT3
Tx1 = DWxT4
elsif TK = KJ and TK < TK[1] then
Rx1 = DWxT1
Gx1 = DWxT2
Bx1 = DWxT3
Tx1 = DWxT4

//=/ Alerte
else
Rx1 = ANxT1
Gx1 = ANxT2
Bx1 = ANxT3
Tx1 = ANxT4
endif

//
//=/===============/=//=/===============/=//=/ Kijun
//

//=/ UP
if KJ < TK and (KJ > XB or KJ < XB) then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ < TK and KJ = XB and KJ > KJ[1] then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ = TK and TK > TK[1] and (KJ > XB or KJ < XB) then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ = TK and KJ = XB and KJ > KJ[1] then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4

//=/ Down
elsif KJ > TK and (KJ > XB or KJ < XB) then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ > TK and KJ = XB and KJ < KJ[1] then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ = TK and TK < TK[1] and (KJ > XB or KJ < XB) then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ = TK and KJ = XB and KJ < KJ[1] then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4

//=/ Alerte 1
elsif KJ = TK and TK = TK[1] and (KJ > XB or KJ < XB) then
Rx2 = A1xK1
Gx2 = A1xK2
Bx2 = A1xK3
Tx2 = A1xK4

//=/ Alerte 2
else
Rx2 = A2xK1
Gx2 = A2xK2
Bx2 = A2xK3
Tx2 = A2xK4
endif

//
//=/===============/=//=/===============/=//=/ Excès Tenkan
//

//=/ UP T1
if Lx1 > KJ and Lx1[1] => KJ[1] and TK > KJ then
drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],Lx1[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx1 > KJ and Lx1[1] =< KJ[1] and TK > KJ then
drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],KJ[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx1 =< KJ and Lx1[1] > KJ[1] and TK > KJ then
drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif

//=/ DW T1
if Hx1 < KJ and Hx1[1] =< KJ[1] and TK < KJ then
drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],Hx1[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx1 < KJ and Hx1[1] => KJ[1] and TK < KJ then
drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],KJ[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx1 => KJ and Hx1[1] < KJ[1] and TK < KJ then
drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif

//
//=/===============/=//=/===============/=//=/ Excès Kijun
//

//=/ UP T1
if Lx2 > XB and Lx2[1] => XB[1] and KJ > XB then
drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Lx2,barindex,XB,barindex[1],Lx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx2 > XB and Lx2[1] =< XB[1] and KJ > XB then
drawtriangle(barindex,Lx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx2 =< XB and Lx2[1] > XB[1] and KJ > XB then
drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif

//=/ DW T1
if Hx2 < XB and Hx2[1] =< XB[1] and KJ < XB then
drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Hx2,barindex,XB,barindex[1],Hx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx2 < XB and Hx2[1] => XB[1] and KJ < XB then
drawtriangle(barindex,Hx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx2 => XB and Hx2[1] < XB[1] and KJ < XB then
drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif


//
//=/===============/=//=/===============/=//=/ Fin
//

return TK coloured(Rx1,Gx1,Bx1,Tx1) style(line,1) as "Tenkan", KJ coloured(Rx2,Gx2,Bx2,Tx2) style(line,2) as "Kijun"

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

//=/===============/=//=/===============/=//=/ Paramettre de Base

defparam calculateonlastbars = 2000

//=/===============/=//=/===============/=//=/ Paramettre des couleurs

//=/ = = Tenkan

//=/ Tenkan Hausse

UPxT1 = 0

UPxT2 = 150

UPxT3 = 255

UPxT4 = 200

//=/ Tenkan Baisse

DWxT1 = 102

DWxT2 = 102

DWxT3 = 102

DWxT4 = 200

//=/ Tenkan Anormalité

ANxT1 = 255

ANxT2 = 102

ANxT3 = 0

ANxT4 = 250

//=/ = = Kijun

//=/ Kijun Hausse

UPxK1 = 0

UPxK2 = 150

UPxK3 = 255

UPxK4 = 200

//=/ Kijun Baisse

DWxK1 = 102

DWxK2 = 102

DWxK3 = 102

DWxK4 = 200

//=/ Kijun Anormalité Type 1

A1xK1 = 255

A1xK2 = 102

A1xK3 = 0

A1xK4 = 250

//=/ Kijun Anormalité Type 2

A2xK1 = 204

A2xK2 = 0

A2xK3 = 0

A2xK4 = 250

//=/ = = Excès Tenkan

//=/ Excès Haussier

EHxT1 = 0

EHxT2 = 150

EHxT3 = 255

EHxT4 = 30

//=/ Excès Baissier

EBxT1 = 102

EBxT2 = 102

EBxT3 = 102

EBxT4 = 30

//=/ = = Excès Kijun

EKxT1 = 255

EKxT2 = 102

EKxT3 = 0

EKxT4 = 30

//=/===============/=//=/===============/=//=/ Indicateur

//=/ Ichimoku

Hx1 = highest[9](high)

Lx1 = lowest[9](low)

//=//

Hx2 = highest[26](high)

Lx2 = lowest[26](low)

//=//

Hx3 = highest[52](high)

Lx3 = lowest[52](low)

//=//

XB = (Hx3+Lx3)/2

XA = (Hx1+Lx1+Hx2+Lx2)/4

//=//

SA = (XA[26])

SB = (XB[26])

TK = (highest[9](high)+lowest[9](low))/2

KJ = (highest[26](high)+lowest[26](low))/2

//=/===============/=//=/===============/=//=/ Tenkan

//=/ UP

if TK > KJ then

Rx1 = UPxT1

Gx1 = UPxT2

Bx1 = UPxT3

Tx1 = UPxT4

elsif TK = KJ and TK > TK[1] then

Rx1 = UPxT1

Gx1 = UPxT2

Bx1 = UPxT3

Tx1 = UPxT4

//=/ Down

elsif TK < KJ then

Rx1 = DWxT1

Gx1 = DWxT2

Bx1 = DWxT3

Tx1 = DWxT4

elsif TK = KJ and TK < TK[1] then

Rx1 = DWxT1

Gx1 = DWxT2

Bx1 = DWxT3

Tx1 = DWxT4

//=/ Alerte

else

Rx1 = ANxT1

Gx1 = ANxT2

Bx1 = ANxT3

Tx1 = ANxT4

endif

//=/===============/=//=/===============/=//=/ Kijun

//=/ UP

if KJ < TK and (KJ > XB or KJ < XB) then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ < TK and KJ = XB and KJ > KJ[1] then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ = TK and TK > TK[1] and (KJ > XB or KJ < XB) then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ = TK and KJ = XB and KJ > KJ[1] then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

//=/ Down

elsif KJ > TK and (KJ > XB or KJ < XB) then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ > TK and KJ = XB and KJ < KJ[1] then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ = TK and TK < TK[1] and (KJ > XB or KJ < XB) then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ = TK and KJ = XB and KJ < KJ[1] then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

//=/ Alerte 1

elsif KJ = TK and TK = TK[1] and (KJ > XB or KJ < XB) then

Rx2 = A1xK1

Gx2 = A1xK2

Bx2 = A1xK3

Tx2 = A1xK4

//=/ Alerte 2

else

Rx2 = A2xK1

Gx2 = A2xK2

Bx2 = A2xK3

Tx2 = A2xK4

endif

//=/===============/=//=/===============/=//=/ Excès Tenkan

//=/ UP T1

if Lx1 > KJ and Lx1[1] => KJ[1] and TK > KJ then

drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],Lx1[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx1 > KJ and Lx1[1] =< KJ[1] and TK > KJ then

drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],KJ[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx1 =< KJ and Lx1[1] > KJ[1] and TK > KJ then

drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=/ DW T1

if Hx1 < KJ and Hx1[1] =< KJ[1] and TK < KJ then

drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],Hx1[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx1 < KJ and Hx1[1] => KJ[1] and TK < KJ then

drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],KJ[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx1 => KJ and Hx1[1] < KJ[1] and TK < KJ then

drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=/===============/=//=/===============/=//=/ Excès Kijun

//=/ UP T1

if Lx2 > XB and Lx2[1] => XB[1] and KJ > XB then

drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Lx2,barindex,XB,barindex[1],Lx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx2 > XB and Lx2[1] =< XB[1] and KJ > XB then

drawtriangle(barindex,Lx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx2 =< XB and Lx2[1] > XB[1] and KJ > XB then

drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=/ DW T1

if Hx2 < XB and Hx2[1] =< XB[1] and KJ < XB then

drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Hx2,barindex,XB,barindex[1],Hx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx2 < XB and Hx2[1] => XB[1] and KJ < XB then

drawtriangle(barindex,Hx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx2 => XB and Hx2[1] < XB[1] and KJ < XB then

drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=/===============/=//=/===============/=//=/ Fin

return TK coloured(Rx1,Gx1,Bx1,Tx1) style(line,1) as "Tenkan", KJ coloured(Rx2,Gx2,Bx2,Tx2) style(line,2) as "Kijun"

ichimoku trend following Trendfollowing

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

ribes65 Bonjour Nicolas, Merci pour votre travail. Est-il envisageable de créer un screener pour ...

Nicolas Bien sûr, merci de formuler une demande dans le forum des screeners pour prorealtime. En res...

ipbvba Est il possible de le transformer en indicateur (pour ne plus avoir les lignes mais uniqueme...

Maxime Baudin Thanks!

Byggtrader Hi Nicolas! How do I get the indicator in the price chart? It only stays under i new chart.

Nicolas Just add it on the price chart by using the wrench on the left upper side of the chart (pric...

Dom Hello, hello....je commence le trading et découvre par la même occasion le codage....et ce n...

Nicolas Merci, ça fait plaisir !

Be-n Bonjour tout le monde ! Dans l'indicateur de tendance, j'ai du mal à saisir la nuance entre ...

manchokcity can we have it in mql4 platform? or how or which platform do we use it?

camporan I don't use MetaTrader so I won't be able to do the translation myself. Sorry!

Alexander9 This can for amibroker ? . Thanks

Gubben So far so good. After a long drawdown it was winning four times in five weeks. Since 24 jul...

pat95162 Salut Pourquoi je n'ai pas les même résultats que vous

UkCoopDownUnder Any hints for us, on which variables we should be optimising ? As of November 2020, the cu...

ggolfet Thanks Nicolas, I imported the itf file and solved the problem.

Hasardeur Hallo Nicolas, i tried to code the multi period heat map in combination with the Ehler’s ...

Nicolas Please open a new topic with the code in forum.

Kovit Hi guys, please could someone help with a bit of Ichimoku code that will improve performance...

Kovit lol I should be more exact with my wording, more accurately I was looking for an indicator t...

jm121212 how can we change the default settings?

winnie37 yes. "No ground breaking math here, but I am finding very useful and some algo based on it i...

Jan Wind Also interesting to know what does not work, which set up you use, saves me investigating ! ...

winnie37 i just set the proorder like this: buy when 50/100/200 phase >0 and sell when under 0, go...

marcosamo Hello and thank you for this indicator, I have a small problem, it only shows the pawn at th...

marcosamo in fact I just saw a rider, so everything works sorry for my previous question

swapping perfect marcosamo, coupled with ichimoku-price-pattern this is better ;)

nfulcher Please could someone explain how the following code is calculated:- iDI = TEMA[3](DI[DI2]...

oakenstream Jan, I find sometimes that the priceexit variable is never set. It seems to happen when the ...

Matt66612 I do not understand the first time I launch the backtest I got the same result as you. but ...

quibe56 Bonjour, à priori les couleurs pour le Katana ne fonctionnent pas ( départ haussier ou élan...

swapping Bonjour quibe56, n'ayant pas rencontré ce défaut je continu néanmoins à structurer le code p...

juanj @Holy Grail, glad you like it. Would you perhaps mind sharing your results here: https://www...

CaptainCaveman I am reluctant to say this buy I was a member of Dr Elder trading group for a while . The fa...

micquan The design is too complex and the performance is low.

Janfi Hello, I'm new to ProRealCode and I do not understand the following summation[n](indicator...

Kaci It seems he's just checking that the previous MACD is < 0 for maximum one period ? I'...

Daniel Martin Hi do you know how have and entry after the second cross? There is crosses below 0 and cross...

Share this

Likes