Kinko Yo

Trying to understand the relevance of the values linked to ichimoku, I tried several experiments that I transmit as a cloud or a colored line

By applying the highest and lowest 9, I observed that it could indicate small corrections or small range before their appearance, this is explained by the effect of over-purchase or overselling, you can then see a small cloud stuck to the kijun when this “elastic” effect appears,

By applying the highest and lowest 26, I observed that it could indicate strong corrections or large range before their appearance, this is explained by the effect of overbought or oversold :), you can then see an orange cloud appearing.

Also on the image, you can see the Kijun becoming Orange, this coloration appears when the Kijun and the Tenkan are glued and horizontal, the movements that follow are often uncertain…

When the Kijun turns Red, the Kijun and the Real SSB are glued and horizontal, the movements that follow are very erratic!

The main picture shows this information quite clearly.

I know we have our favorite colors!
That’s why at the beginning of the code, you have a panel that allows you to modify the color codes with information to know which code corresponds to which color .

Update link and discussions: https://www.prorealcode.com/topic/discution-et-maj-indicateur-kinko-yo/

//
//=/===============/=//=/===============/=//=/ Paramettre de Base
//


defparam calculateonlastbars = 2000

//
//=/===============/=//=/===============/=//=/ Paramettre des couleurs
//

//
//=/ = = Tenkan
//

//=/ Tenkan Hausse
UPxT1 = 0
UPxT2 = 150
UPxT3 = 255
UPxT4 = 200

//=/ Tenkan Baisse
DWxT1 = 102
DWxT2 = 102
DWxT3 = 102
DWxT4 = 200

//=/ Tenkan Anormalité
ANxT1 = 255
ANxT2 = 102
ANxT3 = 0
ANxT4 = 250

//
//=/ = = Kijun
//

//=/ Kijun Hausse
UPxK1 = 0
UPxK2 = 150
UPxK3 = 255
UPxK4 = 200

//=/ Kijun Baisse
DWxK1 = 102
DWxK2 = 102
DWxK3 = 102
DWxK4 = 200

//=/ Kijun Anormalité Type 1
A1xK1 = 255
A1xK2 = 102
A1xK3 = 0
A1xK4 = 250

//=/ Kijun Anormalité Type 2
A2xK1 = 204
A2xK2 = 0
A2xK3 = 0
A2xK4 = 250

//
//=/ = = Excès Tenkan
//

//=/ Excès Haussier
EHxT1 = 0
EHxT2 = 150
EHxT3 = 255
EHxT4 = 30

//=/ Excès Baissier
EBxT1 = 102
EBxT2 = 102
EBxT3 = 102
EBxT4 = 30

//
//=/ = = Excès Kijun
//

EKxT1 = 255
EKxT2 = 102
EKxT3 = 0
EKxT4 = 30

//
//=/===============/=//=/===============/=//=/ Indicateur
//

//=/ Ichimoku
Hx1 = highest[9](high)
Lx1 = lowest[9](low)
//=//
Hx2 = highest[26](high)
Lx2 = lowest[26](low)
//=//
Hx3 = highest[52](high)
Lx3 = lowest[52](low)
//=//
XB = (Hx3+Lx3)/2
XA = (Hx1+Lx1+Hx2+Lx2)/4
//=//
SA = (XA[26])
SB = (XB[26])
TK = (highest[9](high)+lowest[9](low))/2
KJ = (highest[26](high)+lowest[26](low))/2

//
//=/===============/=//=/===============/=//=/ Tenkan
//

//=/ UP
if TK > KJ then
Rx1 = UPxT1
Gx1 = UPxT2
Bx1 = UPxT3
Tx1 = UPxT4
elsif TK = KJ and TK > TK[1] then
Rx1 = UPxT1
Gx1 = UPxT2
Bx1 = UPxT3
Tx1 = UPxT4

//=/ Down
elsif TK < KJ then
Rx1 = DWxT1
Gx1 = DWxT2
Bx1 = DWxT3
Tx1 = DWxT4
elsif TK = KJ and TK < TK[1] then
Rx1 = DWxT1
Gx1 = DWxT2
Bx1 = DWxT3
Tx1 = DWxT4

//=/ Alerte
else
Rx1 = ANxT1
Gx1 = ANxT2
Bx1 = ANxT3
Tx1 = ANxT4
endif

//
//=/===============/=//=/===============/=//=/ Kijun
//

//=/ UP
if KJ < TK and (KJ > XB or KJ < XB) then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ < TK and KJ = XB and KJ > KJ[1] then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ = TK and TK > TK[1] and (KJ > XB or KJ < XB) then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4
elsif KJ = TK and KJ = XB and KJ > KJ[1] then
Rx2 = UPxK1
Gx2 = UPxK2
Bx2 = UPxK3
Tx2 = UPxK4

//=/ Down
elsif KJ > TK and (KJ > XB or KJ < XB) then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ > TK and KJ = XB and KJ < KJ[1] then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ = TK and TK < TK[1] and (KJ > XB or KJ < XB) then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4
elsif KJ = TK and KJ = XB and KJ < KJ[1] then
Rx2 = DWxK1
Gx2 = DWxK2
Bx2 = DWxK3
Tx2 = DWxK4

//=/ Alerte 1
elsif KJ = TK and TK = TK[1] and (KJ > XB or KJ < XB) then
Rx2 = A1xK1
Gx2 = A1xK2
Bx2 = A1xK3
Tx2 = A1xK4

//=/ Alerte 2
else
Rx2 = A2xK1
Gx2 = A2xK2
Bx2 = A2xK3
Tx2 = A2xK4
endif

//
//=/===============/=//=/===============/=//=/ Excès Tenkan
//

//=/ UP T1
if Lx1 > KJ and Lx1[1] => KJ[1] and TK > KJ then
drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],Lx1[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx1 > KJ and Lx1[1] =< KJ[1] and TK > KJ then
drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],KJ[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx1 =< KJ and Lx1[1] > KJ[1] and TK > KJ then
drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)
endif

//=/ DW T1
if Hx1 < KJ and Hx1[1] =< KJ[1] and TK < KJ then
drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],Hx1[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx1 < KJ and Hx1[1] => KJ[1] and TK < KJ then
drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],KJ[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx1 => KJ and Hx1[1] < KJ[1] and TK < KJ then
drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)
endif

//
//=/===============/=//=/===============/=//=/ Excès Kijun
//

//=/ UP T1
if Lx2 > XB and Lx2[1] => XB[1] and KJ > XB then
drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Lx2,barindex,XB,barindex[1],Lx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx2 > XB and Lx2[1] =< XB[1] and KJ > XB then
drawtriangle(barindex,Lx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Lx2 =< XB and Lx2[1] > XB[1] and KJ > XB then
drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif

//=/ DW T1
if Hx2 < XB and Hx2[1] =< XB[1] and KJ < XB then
drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
drawtriangle(barindex,Hx2,barindex,XB,barindex[1],Hx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx2 < XB and Hx2[1] => XB[1] and KJ < XB then
drawtriangle(barindex,Hx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif
//=//
if Hx2 => XB and Hx2[1] < XB[1] and KJ < XB then
drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)
endif


//
//=/===============/=//=/===============/=//=/ Fin
//

return TK coloured(Rx1,Gx1,Bx1,Tx1) style(line,1) as "Tenkan", KJ coloured(Rx2,Gx2,Bx2,Tx2) style(line,2) as "Kijun"

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

202

203

204

205

206

207

208

209

210

211

212

213

214

215

216

217

218

219

220

221

222

223

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

256

257

258

259

260

261

262

263

264

265

266

267

268

269

270

271

272

273

274

275

276

277

//=/===============/=//=/===============/=//=/ Paramettre de Base

defparam calculateonlastbars = 2000

//=/===============/=//=/===============/=//=/ Paramettre des couleurs

//=/ = = Tenkan

//=/ Tenkan Hausse

UPxT1 = 0

UPxT2 = 150

UPxT3 = 255

UPxT4 = 200

//=/ Tenkan Baisse

DWxT1 = 102

DWxT2 = 102

DWxT3 = 102

DWxT4 = 200

//=/ Tenkan Anormalité

ANxT1 = 255

ANxT2 = 102

ANxT3 = 0

ANxT4 = 250

//=/ = = Kijun

//=/ Kijun Hausse

UPxK1 = 0

UPxK2 = 150

UPxK3 = 255

UPxK4 = 200

//=/ Kijun Baisse

DWxK1 = 102

DWxK2 = 102

DWxK3 = 102

DWxK4 = 200

//=/ Kijun Anormalité Type 1

A1xK1 = 255

A1xK2 = 102

A1xK3 = 0

A1xK4 = 250

//=/ Kijun Anormalité Type 2

A2xK1 = 204

A2xK2 = 0

A2xK3 = 0

A2xK4 = 250

//=/ = = Excès Tenkan

//=/ Excès Haussier

EHxT1 = 0

EHxT2 = 150

EHxT3 = 255

EHxT4 = 30

//=/ Excès Baissier

EBxT1 = 102

EBxT2 = 102

EBxT3 = 102

EBxT4 = 30

//=/ = = Excès Kijun

EKxT1 = 255

EKxT2 = 102

EKxT3 = 0

EKxT4 = 30

//=/===============/=//=/===============/=//=/ Indicateur

//=/ Ichimoku

Hx1 = highest[9](high)

Lx1 = lowest[9](low)

//=//

Hx2 = highest[26](high)

Lx2 = lowest[26](low)

//=//

Hx3 = highest[52](high)

Lx3 = lowest[52](low)

//=//

XB = (Hx3+Lx3)/2

XA = (Hx1+Lx1+Hx2+Lx2)/4

//=//

SA = (XA[26])

SB = (XB[26])

TK = (highest[9](high)+lowest[9](low))/2

KJ = (highest[26](high)+lowest[26](low))/2

//=/===============/=//=/===============/=//=/ Tenkan

//=/ UP

if TK > KJ then

Rx1 = UPxT1

Gx1 = UPxT2

Bx1 = UPxT3

Tx1 = UPxT4

elsif TK = KJ and TK > TK[1] then

Rx1 = UPxT1

Gx1 = UPxT2

Bx1 = UPxT3

Tx1 = UPxT4

//=/ Down

elsif TK < KJ then

Rx1 = DWxT1

Gx1 = DWxT2

Bx1 = DWxT3

Tx1 = DWxT4

elsif TK = KJ and TK < TK[1] then

Rx1 = DWxT1

Gx1 = DWxT2

Bx1 = DWxT3

Tx1 = DWxT4

//=/ Alerte

else

Rx1 = ANxT1

Gx1 = ANxT2

Bx1 = ANxT3

Tx1 = ANxT4

endif

//=/===============/=//=/===============/=//=/ Kijun

//=/ UP

if KJ < TK and (KJ > XB or KJ < XB) then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ < TK and KJ = XB and KJ > KJ[1] then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ = TK and TK > TK[1] and (KJ > XB or KJ < XB) then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

elsif KJ = TK and KJ = XB and KJ > KJ[1] then

Rx2 = UPxK1

Gx2 = UPxK2

Bx2 = UPxK3

Tx2 = UPxK4

//=/ Down

elsif KJ > TK and (KJ > XB or KJ < XB) then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ > TK and KJ = XB and KJ < KJ[1] then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ = TK and TK < TK[1] and (KJ > XB or KJ < XB) then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

elsif KJ = TK and KJ = XB and KJ < KJ[1] then

Rx2 = DWxK1

Gx2 = DWxK2

Bx2 = DWxK3

Tx2 = DWxK4

//=/ Alerte 1

elsif KJ = TK and TK = TK[1] and (KJ > XB or KJ < XB) then

Rx2 = A1xK1

Gx2 = A1xK2

Bx2 = A1xK3

Tx2 = A1xK4

//=/ Alerte 2

else

Rx2 = A2xK1

Gx2 = A2xK2

Bx2 = A2xK3

Tx2 = A2xK4

endif

//=/===============/=//=/===============/=//=/ Excès Tenkan

//=/ UP T1

if Lx1 > KJ and Lx1[1] => KJ[1] and TK > KJ then

drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],Lx1[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx1 > KJ and Lx1[1] =< KJ[1] and TK > KJ then

drawtriangle(barindex,Lx1,barindex,KJ,barindex[1],KJ[1]) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx1 =< KJ and Lx1[1] > KJ[1] and TK > KJ then

drawtriangle(barindex[1],Lx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EHxT1,EHxT2,EHxT3,EHxT4) bordercolor(0,0,0,0)

endif

//=/ DW T1

if Hx1 < KJ and Hx1[1] =< KJ[1] and TK < KJ then

drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],Hx1[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx1 < KJ and Hx1[1] => KJ[1] and TK < KJ then

drawtriangle(barindex,Hx1,barindex,KJ,barindex[1],KJ[1]) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx1 => KJ and Hx1[1] < KJ[1] and TK < KJ then

drawtriangle(barindex[1],Hx1[1],barindex[1],KJ[1],barindex,KJ) coloured(EBxT1,EBxT2,EBxT3,EBxT4) bordercolor(0,0,0,0)

endif

//=/===============/=//=/===============/=//=/ Excès Kijun

//=/ UP T1

if Lx2 > XB and Lx2[1] => XB[1] and KJ > XB then

drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Lx2,barindex,XB,barindex[1],Lx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx2 > XB and Lx2[1] =< XB[1] and KJ > XB then

drawtriangle(barindex,Lx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Lx2 =< XB and Lx2[1] > XB[1] and KJ > XB then

drawtriangle(barindex[1],Lx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=/ DW T1

if Hx2 < XB and Hx2[1] =< XB[1] and KJ < XB then

drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

drawtriangle(barindex,Hx2,barindex,XB,barindex[1],Hx2[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx2 < XB and Hx2[1] => XB[1] and KJ < XB then

drawtriangle(barindex,Hx2,barindex,XB,barindex[1],XB[1]) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=//

if Hx2 => XB and Hx2[1] < XB[1] and KJ < XB then

drawtriangle(barindex[1],Hx2[1],barindex[1],XB[1],barindex,XB) coloured(EKxT1,EKxT2,EKxT3,EKxT4) bordercolor(0,0,0,0)

endif

//=/===============/=//=/===============/=//=/ Fin

return TK coloured(Rx1,Gx1,Bx1,Tx1) style(line,1) as "Tenkan", KJ coloured(Rx2,Gx2,Bx2,Tx2) style(line,2) as "Kijun"

ichimoku trend following Trendfollowing

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

Vonasi Forum discussion on these indicators can be found here: https://www.prorealcode.com/topic/av...

jennr29 Hi. Is it possible to convert this code to an mq4 file?

Nicolas Sorry but our website is dedicated to prorealtime programming. However, you can ask for priv...

Leo Does it opens pending orders?... maybe they were not trigger.

Mattzi Dont know, all i can see is that it opened an order yesterday in backtest but not live. Th...

Jean-Christophe Hello Leo, when running the strategy from 29/12/2015 to 31/08/2018 on ProRealTime Premium, I...

Gordon101 Hi when I added your Guppy indicator to my chart it went below the chart beside the oscilla...

Nicolas Add it on the price by using the wrench located on the left upper side of your price chart.

Gordon101 Thanks Nicolas, worked a treat.

Geronima Ortiz I watched the video three times, but I can not put the npips parameter as a variable. I do...

Geronima Ortiz I think the video is for an old version of prorealtime, the images do not correspond at all ...

Nicolas indicator1 = CALL “PRC_StopReversal”[npips, 1] and define npips in the optimization window ...

Caribeengeek Bonjour j’avais vu que vous proposiez d’écrire des codes pour ceux qui s’y connaisse pas Mai...

Caribeengeek Les devises unité

Nicolas Merci d'utiliser le forum pour les demandes de programmation personnalisée

Actabi Thank you ! Have you realised your "next step" ?

Jessar guten Tag, gibt es bereits die Aktualisierte Datei?

Per Inge Gents - An update - I have been studying various trading approaches, as this one that is bas...

juanj This gets me thinking about creating a strategy on the 5min timeframe that only takes trades...

GraHal I noted above does okay on DAX 10 min with even a reduction to 30 of the Stop Loss. I've s...

Kris75 Hi Grahal, What about making the same great work you did with the snipet on google doc but...

styrke Hello Nicolas, Nice screener, I appreciate the way you always try to condense at maximum th...

Nicolas There's no particular reason. RSI is widely use with its default period and results seems re...

Vonasi I noticed a couple of typo errors in the code. The list of variables lines 4 to 11 should be...

Genotik Thank you for your important contribution this week which is much appreciated! Happy New Yea...

Vonasi No problem. I hope they are useful to someone. Happy and hopefully prosperous New Year to y...

DarioMazza Hi Vonasi, i have a question for you, the comand "pricetype" where did you found it in the ...

Vonasi PriceType is just a variable that I use. The value decides what type of price is used in the...

WarningTrading Comment peut on la comparer ? comme ceci ? cela ne me donne plus le message d'erreur manque...

sally31120 Bonjour, je n'arrive pas à créer ce screener close > supertrend extended2[1] la réponse...

Nicolas voir ce sujet pour un screener basé sur Supertrend Extended: https://www.prorealcode.com/top...

Nicolas https://www.prorealcode.com/topic/ayuda-screener-indicador-perfect-trend-line/#post-51291

Manu L. Bonjour Nicolas, suite a une de mes precedentes demande dans le forum indicateur, j'ai touv...

AntoGH C'est selon moi le meilleur indicateur, que j'ai vu, si vous trouvez mieux dîtes moi car dif...

rafadonl2 is not taken into account in the procedure. It considers only if it is a doji or when candle...

Guibourse Okay thanks, just a question : how do you plot your two lines in the same window as price ? ...

rafadonl2 sorry, I don't understand your question. Indicator draws Heikin Ashi candle, not price cand...

Share this

Likes