Halftrend MACD

Here i have made a kind of MACD indicator from the halftrend indicator from the Great NICOLAS, after the improvement from him , I want to shared with everybody.

The histogram is made from the difference of 2 HalfTrend indicator (one long and one short period), then a signal line, built with an average of 6 periods of the histogram values is added.

Trades signals are the same than a normal MACD: long position when the histogram is crossing the zero line, short order when the histogram cross the zero level. The signal line can act the same, any crosses made with the histogram could result as an new order on market:

short signal when the signal line cross above the histogram and above the zero level
long signal when the signal line cross below the histogram and below the zero level

//PRC_HalfTrend MACD | indicator
//10.03.2017
//by LUCASSEN adapted code from 
//Nicolas @ www.prorealcode.com
//Sharing ProRealTime knowledge

//Amplitude1 = 2
//Amplitude2 = 6
//Amplitude3 = 30

// -- HL #1
lowpricei1 = Lowest[Amplitude1](low)
highpricei1 = Highest[Amplitude1](high)
lowma1 = average[Amplitude1](low)
highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then
trend1=1.0
nexttrend1=0
minhighprice1=highpricei1
endif

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then
trend1=0.0
nexttrend1=1
maxlowprice1=lowpricei1
endif

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then
up1=down1[1]
else
up1=Max(maxlowprice1,up1[1])
endif
down1=0.0

else

if(trend1[1]<>1.0) then
down1=up1[1]
else
down1=Min(minhighprice1,down1[1])
endif
up1=0.0
endif

endif





// -- HL #2
lowpricei2 = Lowest[Amplitude2](low)
highpricei2 = Highest[Amplitude2](high)
lowma2 = average[Amplitude2](low)
highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then
trend2=1.0
nexttrend2=0
minhighprice2=highpricei2
endif

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then
trend2=0.0
nexttrend2=1
maxlowprice2=lowpricei2
endif

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then
up2=down2[1]
else
up2=Max(maxlowprice2,up2[1])
endif
down2=0.0

else

if(trend2[1]<>1.0) then
down2=up2[1]
else
down2=Min(minhighprice2,down2[1])
endif
up2=0.0
endif

endif

if up2>0 then
halftrend2 = up2

else
halftrend2 = down2

endif

// -- HL #3
lowpricei3 = Lowest[Amplitude3](low)
highpricei3 = Highest[Amplitude3](high)
lowma3 = average[Amplitude3](low)
highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then
trend3=1.0
nexttrend3=0
minhighprice3=highpricei3
endif

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then
trend3=0.0
nexttrend3=1
maxlowprice3=lowpricei3
endif

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then
up3=down3[1]
else
up3=Max(maxlowprice3,up3[1])
endif
down3=0.0

else

if(trend3[1]<>1.0) then
down3=up3[1]
else
down3=Min(minhighprice3,down3[1])
endif
up3=0.0
endif

endif

if up3>0 then
halftrend3 = up3
else
halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

//PRC_HalfTrend MACD | indicator

//10.03.2017

//by LUCASSEN adapted code from

//Nicolas @ www.prorealcode.com

//Sharing ProRealTime knowledge

//Amplitude1 = 2

//Amplitude2 = 6

//Amplitude3 = 30

// -- HL #1

lowpricei1 = Lowest[Amplitude1](low)

highpricei1 = Highest[Amplitude1](high)

lowma1 = average[Amplitude1](low)

highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then

trend1=1.0

nexttrend1=0

minhighprice1=highpricei1

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then

trend1=0.0

nexttrend1=1

maxlowprice1=lowpricei1

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then

up1=down1[1]

else

up1=Max(maxlowprice1,up1[1])

endif

down1=0.0

else

if(trend1[1]<>1.0) then

down1=up1[1]

else

down1=Min(minhighprice1,down1[1])

endif

up1=0.0

endif

// -- HL #2

lowpricei2 = Lowest[Amplitude2](low)

highpricei2 = Highest[Amplitude2](high)

lowma2 = average[Amplitude2](low)

highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then

trend2=1.0

nexttrend2=0

minhighprice2=highpricei2

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then

trend2=0.0

nexttrend2=1

maxlowprice2=lowpricei2

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then

up2=down2[1]

else

up2=Max(maxlowprice2,up2[1])

endif

down2=0.0

else

if(trend2[1]<>1.0) then

down2=up2[1]

else

down2=Min(minhighprice2,down2[1])

endif

up2=0.0

endif

if up2>0 then

halftrend2 = up2

else

halftrend2 = down2

endif

// -- HL #3

lowpricei3 = Lowest[Amplitude3](low)

highpricei3 = Highest[Amplitude3](high)

lowma3 = average[Amplitude3](low)

highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then

trend3=1.0

nexttrend3=0

minhighprice3=highpricei3

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then

trend3=0.0

nexttrend3=1

maxlowprice3=lowpricei3

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then

up3=down3[1]

else

up3=Max(maxlowprice3,up3[1])

endif

down3=0.0

else

if(trend3[1]<>1.0) then

down3=up3[1]

else

down3=Min(minhighprice3,down3[1])

endif

up3=0.0

endif

if up3>0 then

halftrend3 = up3

else

halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

MACD trend trend following

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


supertiti • 04/06/2017 #
amplitude 1.2.3 = ( 2-6-30 ) or (1-1-27) ?

LUCASSEN • 04/06/2017 #
Hallo Supertiti
Macd amplitude=1-1-27 and prc halftrend triple in Heikin Ashi grafiek amplitude =2-6-10
greetings Lucassen

supertiti • 04/06/2017 #
Thanks you so much Lucassen

dreif123 • 04/06/2017 #
hi, copied the above code, not working on 10.3
the system says “return can only be used at proBuilder….what do i have todo ?

LUCASSEN • 04/06/2017 #
Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, that men nows a lot over indicators.
greetings Lucassen

Maxime Baudin Thanks!

Byggtrader Hi Nicolas! How do I get the indicator in the price chart? It only stays under i new chart.

Nicolas Just add it on the price chart by using the wrench on the left upper side of the chart (pric...

Dom Hello, hello....je commence le trading et découvre par la même occasion le codage....et ce n...

Nicolas Merci, ça fait plaisir !

Be-n Bonjour tout le monde ! Dans l'indicateur de tendance, j'ai du mal à saisir la nuance entre ...

Globalmarkets79 Thank you Vonasi for the answer. I have an other question. When i tried to run the indicator...

Vonasi Lines is either 0 or 1 to turn on or off the drawing of them. Once again if you download and...

Globalmarkets79 Thank you Vonasi, this indicator is very helpful!!!

Bateson Merci pour la réponse Nicolas. C'est bien ce que j'ai fait mais ça ne fonctionne toujours pa...

Enzo Paliotti Veramente ottimo, era quello che cercavo, si potrebbe modificare inserendo come variazione a...

Nicolas Perché no, chiedetelo con una descrizione dettagliata nel forum degli indicatori, per favore!

jiddan78 how to convert to afl amibroker ?

Nicolas We do not supply free coding assistance for AFL Amibroker on the website. You can ask for pa...

Ngomsi @ Vonasi, how to use timeframe , 13 minutes ,21 minutes, 34 minutes,et 55 minutes with this...

manchokcity can we have it in mql4 platform? or how or which platform do we use it?

camporan I don't use MetaTrader so I won't be able to do the translation myself. Sorry!

Alexander9 This can for amibroker ? . Thanks

riz001 thnk u

geroniman bonjour Nicolas, j ai un indicateur le Tiger . J aiemrai placer des fleches buy et sell dire...

Nicolas Merci de formuler les demandes sur le forum. ça n'est pas le bon endroit et hors sujet ici ! ;)

Anonymous Hi robertogozzi - thank you very much for sharing this strategy. I have performed various ...

robertogozzi Thank you samsampop.

Dotan Hello guys I really appreciate this coding effort but can I use this code for Mt5 Forex Trad...

ggolfet Thanks Nicolas, I imported the itf file and solved the problem.

Hasardeur Hallo Nicolas, i tried to code the multi period heat map in combination with the Ehler’s ...

Nicolas Please open a new topic with the code in forum.

LucioleLucide Clean view, thanks for sharing

dertopen hi where i can found the window for candle configuration?

paolosab69 Ciao! . I have seen the pictures that explain this metod but i don't understand when is mome...

winnie37 yes. "No ground breaking math here, but I am finding very useful and some algo based on it i...

Jan Wind Also interesting to know what does not work, which set up you use, saves me investigating ! ...

winnie37 i just set the proorder like this: buy when 50/100/200 phase >0 and sell when under 0, go...

nfulcher Please could someone explain how the following code is calculated:- iDI = TEMA[3](DI[DI2]...

oakenstream Jan, I find sometimes that the priceexit variable is never set. It seems to happen when the ...

Matt66612 I do not understand the first time I launch the backtest I got the same result as you. but ...

JJ Tec Hola Las condiciones de entrada / salida vienen en el libro de J. Carter Mastering the trad...

Pixeldd Ich bekomme beim einfügen des Indikators einen Fehler angezeigt. Was bitte muss ich genau än...

HarryPro Hello, Firtly there appears to be a typo on line 6 "lenghkc=20" should this be "lengthkc=...

marcov66 Hi, it seems a very useful indicator. Unfortunately the link here for the full explanation d...

TACBOLSA Discontinued indicator. we are sorry.

Azzuerus Bonjour, je teste et j'utilise vos indicateurs depuis plusieurs années, et ils me sont dev...

Janfi Hello, I'm new to ProRealCode and I do not understand the following summation[n](indicator...

Kaci It seems he's just checking that the previous MACD is < 0 for maximum one period ? I'...

Daniel Martin Hi do you know how have and entry after the second cross? There is crosses below 0 and cross...

Share this

Likes