Chartist Figures detector

This screener is done only to search for some chartist figures to help you find them easily. Only the upper change tendencies with high probabilities are listed. At longer time period, the probabilities for a raise up is higher than small time units. In general i only advice you to use it for your inofrmation and not to find an entry point

The figures detected are :
1 = Morning star/ abandonned baby
2 = Three inside up
3 = Three outside up
4 = Piercing line
5 = Concealing baby swallow
6 = Tweezers Bottom
7 = Three Lines Strike
8 = (en comment pour le moment) Three white soldiers

Also, when used, the additional column gives you a number. The first part is the unit of time the figure was detected , the last part gives you the number of the figure. (for example : 64 => at the last 6 unit time, 4 = the piercing line)

for i=0 to 9 do
// DESCENDING TENDENCY
// candles d-2, d-3,d-4 are going down
cDOWN0 = high[i+6] > high[i+5]
cDOWN1 = high[i+5] > high[i+4]
cDOWN2 = high[i+4] > high[i+3]
cDOWN3 = low[i+6] > low[i+5]
cDOWN4 = low[i+5] > low[i+4]
cDOWN5 = low[i+4] > low[i+3]

BEFOREDOWN = cDOWN0 and cDOWN1 and cDOWN2 and cDOWN3 and cDOWN4 and cDOWN5

// ---------------------------------
// TODAY IS UP
//cUp0 = open[i] < close[i]
//cUp1 = open[i] > open[i+1]
//cUP10 = low[i] > high[i+1]

AFTERUP = 1//(cUP0 and cUP1) or cUP10
// ---------------------------------
// 1=MORNING STAR
// candle d-3 red
cMS0 = open[i+3] > close[i+3]

// candle d-2 with gap under d-2 and smaller than 33% of d-3
cMS10 = abs(close[i+2] - open[i+2]) < (33/100 * abs(close[i+3] - open[i+3]))
cMS11 = close[i+3] > close[i+2]
cMS12 = close[i+3] > open[i+2]

// last candle is green, upper from d-2 and close more than 50% or d-3
cMS20 = open[i+1] < close[i+1]
cMS21 = open[i+1] > open[i+2]
cMS22 = close[i+1] > ((close[i+3]+open[i+3])/3)

MS = cMS0 and cMS10 and cMS11 and cMS12 and cMS20 and cMS21 and cMS22

// ---------------------------------
// 2=THREE INSIDE UP
// candle d-3 red
cTIU0 = open[i+3] > close[i+3]

// candle d-2 day before is green and is contained in d-3
cTIU10 = open[i+2] < close[i+2]
cTIU11 = open[i+3] > close[i+2]
cTIU12 = close[i+3] < open[i+2]

// candle d-1 is green and upper from d-2
cTIU20 = open[i+1] < close[i+1]
cTIU21 = open[i+1] > open[i+2]
cTIU22 = close[i+1] > open[i+3]

TIU = cTIU0 and cTIU10 and cTIU11 and cTIU12 and cTIU20 and cTIU21 and cTIU22

// ---------------------------------
// 3=THREE OUSTSIDE UP
// candle d-3 red
cTOU0 = open[i+3] > close[i+3]

// doji d-2 day before is green and contain d-3
cTOU10 = open[i+2] < close[i+2]
cTOU11 = open[i+3] < close[i+2]
cTOU12 = close[i+3] > open[i+2]

// last doji is green and upper from d-2
cTOU20 = open[i+1] < close[i+1]
cTOU21 = open[i+1] > open[i+2]
cTOU22 = close[i+1] > close[i+2]

TOU = cTOU0 and cTOU10 and cTOU11 and cTOU12 and cTOU20 and cTOU21 and cTOU22

// ---------------------------------
// 4=PIERCING LINE
// d-2 is red
cPL0 = open[i+2] > close[i+2]
cPL1 = high[i+3] > high[i+2]
cPL2 = low[i+3] > low[i+2]

// d-1 is green with gap under and up more thn 50% of d-2 but inside it
cPL10 = open[i+1] < close[i+1]
cPL11 = open[i+1] < low[i+2]
cPL12 = close[i+1] > ((close[i+2]-open[i+2])/2+open[i+2])
cPL13 = open[i+2] > close[i+1]

PL = cPL0 and cPL1 and cPL2 and cPL10 and cPL11 and cPL12 and cPL13

// ---------------------------------
// 5=CONCEALING BABY SWALLOW
// all days are red
cCBS0 = open[i+4] > close[i+4]
cCBS1 = open[i+3] > close[i+3]
cCBS2 = open[i+2] > close[i+2]
cCBS3 = open[i+1] > close[i+1]

// d-2 have a gap
cCBS10 = low[i+3] > close[i+2]

// d-1 cover totally d-2
cCBS20 = open[i+1] < low[i+2]
cCBS21 = close[i+1] > high[i+2]

CBS = cCBS0 and cCBS1 and cCBS2 and cCBS3 and cCBS10 and cCBS20 and cCBS21

// ---------------------------------
// 6=TWEEZERS BOTTOM
// d-2 is going down and red
cTB0 = high[i+3] > high[i+2]
cTB1 = low[i+3] > low[i+2]
cTB2 = open[i+2] > close[i+2]

// d-1 is green and same bottom than d-2
cTB10 = open[i+1] < close[i+1]
cTB11 = low[i+2] = low[i+1]

TB = cTB0 and cTB1 and cTB2 and cTB10 and cTB11

// ---------------------------------
// 7=THREE LINES STRIKE
// d-4, d-3 and d-2 red and going down
cTLS0 = open[i+4] > close[i+4]
cTLS1 = open[i+3] > close[i+3]
cTLS2 = open[i+2] > close[i+2]
cTLS3 = high[i+3] > high[i+2]
cTLS4 = low[i+3] > low[i+2]

// d-1 is green and contain all last three candles
cTLS10 = open[i+1] < close[i+1]
cTLS11 = open[i+1] < close[i+2]
cTLS12 = close[i+1] > open[i+4]

TLS = cTLS0 and cTLS1 and cTLS2 and cTLS3 and cTLS4 and cTLS10 and cTLS11 and cTLS12

// ---------------------------------
// 8=THREE WHITE SOLDIER
// 3 last are green and upper
cTWS10 = open[i+3] < close[i+3]
cTWS11 = open[i+2] < close[i+2]
cTWS12 = open[i+1] < close[i+1]

cTWS13 = open[i+3] < open[i+2]
cTWS14 = open[i+2] < open[i+1]
cTWS15 = close[i+3] < close[i+2]
cTWS16 = close[i+2] < close[i+1]

// second candle is bigger tahn first
cTWS20 = close[i+2]-open[i+2] > close[i+3]-open[i+3]

TWS = cTWS10 and cTWS11 and cTWS12 and cTWS13 and cTWS14 and cTWS15 and cTWS16 and cTWS20

// ---------------------------------
// CONCLUSION
x=0
if BEFOREDOWN and AFTERUP then
if MS then
x=1
break
elsif TIU then
x=2
break
elsif TOU then
x=3
break
elsif PL then
x=4
break
elsif CBS then
x=5
break
elsif TB then
x=6
break
elsif TLS then
x=7
break
elsif TWS then
//x=8
endif
endif
next

SCREENER[x>0]((i+3)*10+x as "1=MS, 2=TIU, 3=TOU, 4=PL, 5=CBS, 6=TB, 7=TLS, 8=TWS")

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

for i=0 to 9 do

// DESCENDING TENDENCY

// candles d-2, d-3,d-4 are going down

cDOWN0 = high[i+6] > high[i+5]

cDOWN1 = high[i+5] > high[i+4]

cDOWN2 = high[i+4] > high[i+3]

cDOWN3 = low[i+6] > low[i+5]

cDOWN4 = low[i+5] > low[i+4]

cDOWN5 = low[i+4] > low[i+3]

BEFOREDOWN = cDOWN0 and cDOWN1 and cDOWN2 and cDOWN3 and cDOWN4 and cDOWN5

// ---------------------------------

// TODAY IS UP

//cUp0 = open[i] < close[i]

//cUp1 = open[i] > open[i+1]

//cUP10 = low[i] > high[i+1]

AFTERUP = 1//(cUP0 and cUP1) or cUP10

// ---------------------------------

// 1=MORNING STAR

// candle d-3 red

cMS0 = open[i+3] > close[i+3]

// candle d-2 with gap under d-2 and smaller than 33% of d-3

cMS10 = abs(close[i+2] - open[i+2]) < (33/100 * abs(close[i+3] - open[i+3]))

cMS11 = close[i+3] > close[i+2]

cMS12 = close[i+3] > open[i+2]

// last candle is green, upper from d-2 and close more than 50% or d-3

cMS20 = open[i+1] < close[i+1]

cMS21 = open[i+1] > open[i+2]

cMS22 = close[i+1] > ((close[i+3]+open[i+3])/3)

MS = cMS0 and cMS10 and cMS11 and cMS12 and cMS20 and cMS21 and cMS22

// ---------------------------------

// 2=THREE INSIDE UP

// candle d-3 red

cTIU0 = open[i+3] > close[i+3]

// candle d-2 day before is green and is contained in d-3

cTIU10 = open[i+2] < close[i+2]

cTIU11 = open[i+3] > close[i+2]

cTIU12 = close[i+3] < open[i+2]

// candle d-1 is green and upper from d-2

cTIU20 = open[i+1] < close[i+1]

cTIU21 = open[i+1] > open[i+2]

cTIU22 = close[i+1] > open[i+3]

TIU = cTIU0 and cTIU10 and cTIU11 and cTIU12 and cTIU20 and cTIU21 and cTIU22

// ---------------------------------

// 3=THREE OUSTSIDE UP

// candle d-3 red

cTOU0 = open[i+3] > close[i+3]

// doji d-2 day before is green and contain d-3

cTOU10 = open[i+2] < close[i+2]

cTOU11 = open[i+3] < close[i+2]

cTOU12 = close[i+3] > open[i+2]

// last doji is green and upper from d-2

cTOU20 = open[i+1] < close[i+1]

cTOU21 = open[i+1] > open[i+2]

cTOU22 = close[i+1] > close[i+2]

TOU = cTOU0 and cTOU10 and cTOU11 and cTOU12 and cTOU20 and cTOU21 and cTOU22

// ---------------------------------

// 4=PIERCING LINE

// d-2 is red

cPL0 = open[i+2] > close[i+2]

cPL1 = high[i+3] > high[i+2]

cPL2 = low[i+3] > low[i+2]

// d-1 is green with gap under and up more thn 50% of d-2 but inside it

cPL10 = open[i+1] < close[i+1]

cPL11 = open[i+1] < low[i+2]

cPL12 = close[i+1] > ((close[i+2]-open[i+2])/2+open[i+2])

cPL13 = open[i+2] > close[i+1]

PL = cPL0 and cPL1 and cPL2 and cPL10 and cPL11 and cPL12 and cPL13

// ---------------------------------

// 5=CONCEALING BABY SWALLOW

// all days are red

cCBS0 = open[i+4] > close[i+4]

cCBS1 = open[i+3] > close[i+3]

cCBS2 = open[i+2] > close[i+2]

cCBS3 = open[i+1] > close[i+1]

// d-2 have a gap

cCBS10 = low[i+3] > close[i+2]

// d-1 cover totally d-2

cCBS20 = open[i+1] < low[i+2]

cCBS21 = close[i+1] > high[i+2]

CBS = cCBS0 and cCBS1 and cCBS2 and cCBS3 and cCBS10 and cCBS20 and cCBS21

// ---------------------------------

// 6=TWEEZERS BOTTOM

// d-2 is going down and red

cTB0 = high[i+3] > high[i+2]

cTB1 = low[i+3] > low[i+2]

cTB2 = open[i+2] > close[i+2]

// d-1 is green and same bottom than d-2

cTB10 = open[i+1] < close[i+1]

cTB11 = low[i+2] = low[i+1]

TB = cTB0 and cTB1 and cTB2 and cTB10 and cTB11

// ---------------------------------

// 7=THREE LINES STRIKE

// d-4, d-3 and d-2 red and going down

cTLS0 = open[i+4] > close[i+4]

cTLS1 = open[i+3] > close[i+3]

cTLS2 = open[i+2] > close[i+2]

cTLS3 = high[i+3] > high[i+2]

cTLS4 = low[i+3] > low[i+2]

// d-1 is green and contain all last three candles

cTLS10 = open[i+1] < close[i+1]

cTLS11 = open[i+1] < close[i+2]

cTLS12 = close[i+1] > open[i+4]

TLS = cTLS0 and cTLS1 and cTLS2 and cTLS3 and cTLS4 and cTLS10 and cTLS11 and cTLS12

// ---------------------------------

// 8=THREE WHITE SOLDIER

// 3 last are green and upper

cTWS10 = open[i+3] < close[i+3]

cTWS11 = open[i+2] < close[i+2]

cTWS12 = open[i+1] < close[i+1]

cTWS13 = open[i+3] < open[i+2]

cTWS14 = open[i+2] < open[i+1]

cTWS15 = close[i+3] < close[i+2]

cTWS16 = close[i+2] < close[i+1]

// second candle is bigger tahn first

cTWS20 = close[i+2]-open[i+2] > close[i+3]-open[i+3]

TWS = cTWS10 and cTWS11 and cTWS12 and cTWS13 and cTWS14 and cTWS15 and cTWS16 and cTWS20

// ---------------------------------

// CONCLUSION

x=0

if BEFOREDOWN and AFTERUP then

if MS then

x=1

break

elsif TIU then

x=2

break

elsif TOU then

x=3

break

elsif PL then

x=4

break

elsif CBS then

x=5

break

elsif TB then

x=6

break

elsif TLS then

x=7

break

elsif TWS then

//x=8

endif

SCREENER[x>0]((i+3)*10+x as "1=MS, 2=TIU, 3=TOU, 4=PL, 5=CBS, 6=TB, 7=TLS, 8=TWS")

candlestick candlestick pattern candlesticks patterns

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


Oxxoz • 07/22/2020 #
Bonjour Vivien,
Avant tout félicitations pour ton travail ! Par contre, je te propose d’écrire VR_ITF files afin que tes screenners soient regroupés.
C’est le début d’une image de marque 🙂
A plus

Adante79 • 07/22/2020 #
Thank you. These will be helpful. 🙂

kroust • 07/22/2020 #
Bonjour Vivien, j’aimerai utiliser ton screener, mais je n’arrive pas à l’utiliser? j’ai bien copié le code, mais je n’ai aucune detection? il doit y avoir un truc à modifier ou à regler pour que ca fonctionne? merci en tout cas !
- Nicolas • 07/22/2020 #
  Vous devriez télécharger le fichier itf et l’importer dans la plateforme au lieu de copier/coller. Par ailleurs, si il n’y a pas de résultat, essayez sur une autre liste de valeurs.

Igor • 07/22/2020 #
Bonjour Vivien. Le proscrenner m’affiche une colonne de chiffre … 42, 56, 112 … ? A quoi cela correspond ? Merci.
- ngarnier54 • 07/22/2020 #
  La première partie est l’unité de temps où la figure a été détectée, la dernière partie vous donne le numéro de la figure. (par exemple: 64 => aux 6 dernières unités de temps, 4 = la ligne de perçage)

bibifricotin • 07/22/2020 #
Bonjour je suis très intéressé par ce screener mais je ne comprends pas les résultats que j’obtiens. voir ci dessous

les chiffres de la première colonne ne correspondent pas aux indications que je devrais avoir et la deuxième colonne donne le prix
merci de vos commentaires

https://zupimages.net/up/21/30/mrnj.jpg

bibifricotin • 07/22/2020 #

bibifricotin • 07/22/2020 #
Je pense avoir compris dans la première colonne exemple 92 le 9 indique la période et le 2 three inside up

Leo_da_Pisa • 07/22/2020 #
It seems to work very well. Good for confirmation.
Thanks for sharing Vivien.

Gregg Hi all, is there anyone who is using this pattern? It's been 3 days I'm trying it and I'm ...

Violet Hi Gregg, TP and SL? There are no variables by those names. The signal appears/disapp...

Marcus Quartus Aurius Thanks great job !

Dadoo Incredible workLeo. Thankyou to share you time and knowledge

tommygtb what does the criteria mean in the box on the screen is it the time frame the screener sear...

Saberi2023 Hello dear Can you please write it also in java script?

JohnScher indicators i did fond, no problem, but a basic code to trade maybe RSI divergence didn´t fou...

Daniel3987 Please how do I add the prc candle strength to my mt5 on an iPhone

Nicolas You can't, this indicator is made to be used with prorealtime trading platform.

parthapersonal Great job Leo. Dear Zen83, how do you, "return them into the very last line"?

steve_ Hi! This thread is quite old, but let’s try… I’m new with Prorealcode and I’ve just di...

steve_ Hi! I've created a topic in french (translatable with Google function) here : https://www.p...

Anonymous Sorry I mean vertical red / green line

Anonymous Found: just remove "T coloured(r,g,b) as "Top", Bo coloured(r,g,b) as "Bottom"... after return

darbes Hi I tried to use indicator in a strategy code. But backtesting is asking to define Signalb...

Anonymous Thanks for sharing! On the other hand can we remove the vertical gray lines?

ShaunG Appreciated! Thanks 100%

tonbijl good afternoon when i enter the code i get an error message Syntax error

rispardin no entiendo como funciana este indicador, por favor alguien podria explicar como utilizarlo???

AVT No se trata de un solo indicador, pero cada linea muestra otra información, de abajo hacia ...

IV Mcm Your indicator is interesting, I evaluated its relevance with the squeeze to detect the phas...

bjoern With the same parameters? For me the results are negative

bjoern Oh ok, with the initial posted parameters it is positive

victormork yes! It's not like you want to put it on live but when I for example take the version I have...

Doctrading Hello, Higher timeframes are better. I suggest D1 or H4.Best regards,

Pinkybouh hello, I propose to add another conditions: ie: haussier: close > open and close >...

TheHovisTrader I'd be interested in the actual profit of this - in the example the stop range is at least 2...

Nicolas Restart your platform in order to be sure to use the last version, there was a version rollb...

bertrandpinoy bonjour voud pouvez m envoyer le code modifier par vous?

Nicolas Désolé , je ne comprends pas votre question.

Jessar Hi friends, is there any way to program the system to close the position when you have a lon...

Pring00 Hello @Nicolas, thanks for this code! Just what i was looking for. I'm fairly new to this...

Nicolas Needs custom coding, ask for a mod in a dedicated topic, in the appropriate forum please.

Ciccio As written some posts above, there is an update here https://www.prorealcode.com/prorealtim...

Mrmamps079 Hi Admin, I can't plug this indicator on my metatrader 4 on my laptop. When I add it on my i...

Nicolas Sorry but we do not provide any help for mt4 users. Our website is dedicated to ProRealTime ...

Share this

Likes