TAC VSA Volume Spread Analysis

v10.3
TAC VSA Volume Spread Analysis

Following the principles of Holey, Wyckoff, Livermore, Tom Williams, and Anna Coulling among others.

We have related the main ones:

▴Candle / Bullish Bar //green triangle

▾ Candle / Bearish Bar //red triangle

  • Sign indicating an anomaly between price and volume where a turn can be made in any direction by indecision. //circle
  • NODemand //red circle

-In this situation professionals will not sustain the market if they observe weakness in the background.

-If the volume is low in bullish days, this shows no demand for the big ones.

-NO DEMAND BAR: narrow range bar, low volume, close in half or in the lower part..

  • NOSupply //green circle

At the end of a bearish trend or bullish turn within the bearish trend, we will see an increase in hammer or candle candles with large shadows below that indicate demand pressure.

  • Test for Supply / Test Volume //blue circle

Bearish bars: If the price falls with volume lower than the two previous bars, with narrow range, and the current candle that marks the price closes in half or higher, indicates “NOSupply”.

  • StopVolume //gray circle

It shows the moment when purchases cover all sales.

-A high volume, bearish bar, wide range, will normally indicate sales, but …

-If the next day is bullish and close at maximum, this shows that the purchases absorbed the sales the previous day.

– Only professional money can do this and it is a good indicator of strength.

EFFORT:

  • UP //green circle
  • DOW  //red circle
  • UPTHRUST  //red circle
  • REVERSE UPTHRUST //green circle

 

Share this

spread volume volumes
Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on ProRealCode Marketplace

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

avatar
06/20/2018

21 posts • 115 Followers
  1. avatar
    TAC Bolsa • 06/20/2018 #

    //Last Code adapted 06/21/2018.

    vol=volume
    atr = averagetruerange[10](close)*0.5
    mm= average[100](volume)
    VolumeMA = Average[50](mm)
    Vlow = (VolumeMA – ((VolumeMA * 75) / 100))
    VolumeMAA = Average[50](mm)
    Vhigh = (VolumeMAA + ((VolumeMAA * 50) / 100))

    Spread3= Average[50](SPREAD1)
    SPREAD1 = High -low/2
    Spread2= Abs(High[0]-Low[0])
    WIDE= (SPREAD1[0] > Spread2[1]*1.8)
    NARROWS= SPREAD1[0] = open[0])
    DOWNBAR =(close[0] <= open[0])
    DOWNCLOSE=(Close[0]=(High[1]-((High[0]-Low[1])*0.3)))
    UP=max(UPCLOSE, UPBAR)
    Down= min(DOWNBAR, DOWNCLOSE)

    //Move Price
    if UP then
    DrawText(“▴”,barindex,low,SansSerif,bold,15)coloured(0,255,0)
    endif

    if Down then
    DrawText(“▾”,barindex,high,SansSerif,bold,15)coloured(200,0,0)
    endif

    //Divergence —- anomaly Price & Volume
    ND1=(abs(open – close) mm and up
    ND2=open[1] < close and vol < vol[1] and close[1] vhigh[1] and DOWNclose and Close[2]>Close[3] and High[1]>High[2]
    ND= ND1 or ND2 or ND3

    if ND then
    DrawText(“●”,barindex,High,SansSerif,bold,15)coloured(200,0,0)
    endif

    //NoDemand
    ND1= Vol[1] < vol[2] and UPCLOSE and DOWNBAR and (abs(open – close) <= (high – low)/2 )
    ND2 = vol < Vlow and Vol[0] close[1] and close > open and close <= open[1] and close[1] <= open and close – open < open[1] – close[1] ) and (abs(open – close) <= (high – low) * 5/100) and Vol[1] Close[2] and Close[1] < MIDCLOSE and narrows and Vol[1] < vol[2] and Vol[2] Vhigh[1] and Vol[1] > Vhigh[2]

    StoppingVolume = STPV1
    if StoppingVolume then
    DrawText(“StopVolume”,barindex,low-atr*0.5,SansSerif,bold,10)coloured(135,135,135)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(135,135,135)
    endif

    NSP1= (Close[1] < Close[2] and Close[1] Vhigh[2])

    //NO Supply
    NOSupply = NSP1
    if NOSupply then
    DrawText(“NOSupply”,barindex,low-atr*1,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,12)coloured(0,200,0)
    endif

    TESNSP1=(Close[1] UP and Vol[1] < Vol[2] and Vol[0] Vhigh[1] and vol[2] > vol[3] and Close[2]>Close[3] and High[1]>High[2]
    TESNSP3= wide and UP and Vol > Vhigh[1] and vol[2] > vol[3] and Close[2]<Close[3] and low[1]<low[2]

    //Test for Supply
    TESNSP = TESNSP1 or TESNSP2 or TESNSP3 and UPTHRUST
    if TESNSP then
    DrawText("Test for Supply",barindex,high+atr*1.4,SansSerif,bold,10)coloured(0,90,190)
    DrawText("●",barindex,high,SansSerif,bold,12)coloured(0,90,190)
    endif

    //"Reverse UPTHRUST"
    RUT1= (Close[1] < Close[2] and Close[1] vhigh[1] and vol[1] > vhigh[2] )

    ReverseUPTHRUST = RUT1
    if ReverseUPTHRUST then
    DrawText(“Reverse UPTHRUST”,barindex,low-atr*1.5,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,15)coloured(0,200,0)
    endif

    //UPTHRUST
    UT1 =(Close[1] > Close[2] and Close[1] > MIDCLOSE and Low[1] < Low[2] and Low[2] vol[2])

    UPTHRUST= UT1
    if UPTHRUST then
    DrawText(“UPTHRUST”,barindex,high+atr*1,SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,15)coloured(200,0,0)
    endif

    //Effort To Move Down
    EFTD1=WIDE and DOWNBAR and DOWNCLOSE and vol > vhigh and Vol[1]>Vol[2]
    EffortToMoveDown =EFTD1

    if EffortToMoveDown then
    DrawText(“EffortToMoveDown”,barindex,high+atr*2, SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,15)coloured(200,0,0)
    endif

    //Effort To Move Up
    EFTU1=WIDE and UPBAR and UPclose and vol > vhigh and Vol[1]>Vol[2]

    EffortToMoveup = EFTU1
    if EffortToMoveup then
    DrawText(“EffortToMoveup”,barindex,low-atr*2,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,15)coloured(0,200,0)
    endif

    Return

  2. avatar
    TAC Bolsa • 06/20/2018 #

    Sorry is a code that will be improved day by day.
    Do not forget to always copy the last code to be updated.

    This indicator is a way to learn the relationship Price Volume
    There are no signs of entry or exit in the markets.

  3. avatar
    TAC Bolsa • 06/20/2018 #

    Interpretation of the indicator
    https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  4. avatar
    TAC Bolsa • 06/20/2018 #

    //Last improved code 06/24/2018 Version-V3
    ////////////////////////////////////////////////////////////////////////
    REM VSA Volume
    REM TAC VSA | indicator
    REM 09.06.2018
    REM RB @ http://www.tiburonesdealetacorta.com
    REM Sharing http://www.tiburonesdealetacorta.com
    ////////////////////////////////////////////////////////////////////////

    vol=volume
    atr = averagetruerange[10](close)*0.5
    mm= average[100](volume)
    VolumeMA = Average[50](mm)
    Vlow = (VolumeMA – ((VolumeMA * 75) / 100))
    VolumeMAA = Average[50](mm)
    Vhigh = (VolumeMAA + ((VolumeMAA * 50) / 100))

    Spread3= Average[50](Spread1)
    Spread1 = High -low/2
    Spread2= Abs(High[0]-Low[0])
    WIDE= (Spread1[0] > Spread2[1]*1.8)
    NARROWS= Spread1[0] = open[0])
    DOWNBAR =(close[0] <= open[0])
    DOWNCLOSE=(Close[0]=(High[1]-((High[0]-Low[1])*0.3)))
    UP=max(UPCLOSE, UPBAR)
    Down= min(DOWNBAR, DOWNCLOSE)

    //Move Price
    if UP then
    DrawText(“▴”,barindex,low,SansSerif,bold,15)coloured(0,255,0)
    endif

    if Down then
    DrawText(“▾”,barindex,high,SansSerif,bold,15)coloured(200,0,0)
    endif

    //Divergence —- anomaly Price & Volume
    d = close – open
    DV1=(abs(open – close) mm and up
    DV2=open[1] < close and vol < vol[1] and close[1] vhigh[1] and DOWNclose and Close[2]>Close[3] and High[1]>High[2] and Vol d[1]*2 and d[1] > 0 and d 0 and vol d[1]*2 and d[1] > 0 and d 0 and vol > vol[1]
    DV= DV1 or DV2 or DV3 or DV4

    if DV then
    DrawText(“●”,barindex,High,SansSerif,bold,10)coloured(200,0,0)
    endif

    //NoDemand
    ND1= Vol[1] < vol[2] and UPCLOSE and DOWNBAR and (abs(open – close) <= (high – low)/2 )
    ND2 = vol < Vlow and Vol[0] close[1] and close > open and close <= open[1] and close[1] <= open and close – open < open[1] – close[1] ) and (abs(open – close) <= (high – low) * 5/100) and Vol[1] Close[2] and Close[1] < MIDCLOSE and narrows and Vol[1] < vol[2] and Vol[2] < vol[3])
    ND5=Close average[20](vol)

    NoDemand = ND1 or ND2 or ND3 or ND4 or ND5 and UPTHRUST

    if NoDemand then
    DrawText(“NODemand”,barindex,high+atr*1,SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(200,0,0)
    endif

    //Stopping Volume
    STPV1= Vol[0] > Vhigh[1] and Vol[1] > Vhigh[2]

    StoppingVolume = STPV1

    if StoppingVolume then
    DrawText(“StopVolume”,barindex,low-atr*0.5,SansSerif,bold,10)coloured(135,135,135)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(135,135,135)
    endif

    NSP1= (Close[1] < Close[2] and Close[1] Vhigh[2])
    NSP2 =Close > Close[1] and Low=Lowest[10](Low) and Vol>average[20](vol)

    //NO Supply
    NOSupply = NSP1 or NSP2

    if NOSupply then
    DrawText(“NOSupply”,barindex,low-atr*1,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,10)coloured(0,200,0)
    endif

    TESNSP1=(Close[1] UP and Vol[1] < Vol[2] and Vol[0] Vhigh[1] and vol[2] > vol[3] and Close[2]>Close[3] and High[1]>High[2]
    TESNSP3= wide and UP and Vol > Vhigh[1] and vol[2] > vol[3] and Close[2]<Close[3] and low[1]<low[2]

    //Test for Supply
    TESNSP = TESNSP1 or TESNSP2 or TESNSP3 and UPTHRUST

    if TESNSP then
    DrawText("Test for Supply",barindex,high+atr*1.8,SansSerif,bold,10)coloured(0,90,190)
    DrawText("●",barindex,high,SansSerif,bold,10)coloured(0,90,190)
    endif

    //"Reverse UPTHRUST"
    RUT1= (Close[1] < Close[2] and Close[1] vhigh[1] and vol[1] > vhigh[2] )

    ReverseUPTHRUST = RUT1

    if ReverseUPTHRUST then

    DrawText(“Reverse UPTHRUST”,barindex,low-atr*1.5,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,12)coloured(0,200,0)
    endif

    //UPTHRUST
    UT1 =(Close[1] > Close[2] and Close[1] > MIDCLOSE and Low[1] < Low[2] and Low[2] vol[2])

    UPTHRUST= UT1 and EffortToMoveDown

    if UPTHRUST then
    DrawText(“UPTHRUST”,barindex,high+atr*1.5,SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(200,0,0)
    endif

    //Effort To Move Down
    EFTD1=WIDE and DOWNBAR and DOWNCLOSE and vol > vhigh and Vol[1]>Vol[2]

    EffortToMoveDown =EFTD1

    if EffortToMoveDown then
    DrawText(“EffortToMoveDown”,barindex,high+atr*2, SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,12)coloured(200,0,0)
    endif

    //Effort To Move Up
    EFTU1=WIDE and UPBAR and UPclose and vol > vhigh and Vol[1]>Vol[2]

    EffortToMoveup = EFTU1
    if EffortToMoveup then

    DrawText(“EffortToMoveup”,barindex,low-atr*2,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,12)coloured(0,200,0)
    endif

    Return

  5. avatar
    TAC Bolsa • 06/20/2018 #

    //Last improved code 06/24/2018 Version-V3
    ////////////////////////////////////////////////////////////////////////
    REM VSA Volume
    REM TAC VSA | indicator
    REM 09.06.2018
    REM RB @ http://www.tiburonesdealetacorta.com
    REM Sharing http://www.tiburonesdealetacorta.com
    ////////////////////////////////////////////////////////////////////////

    vol=volume
    atr = averagetruerange[10](close)*0.5
    mm= average[100](volume)
    VolumeMA = Average[50](mm)
    Vlow = (VolumeMA – ((VolumeMA * 75) / 100))
    VolumeMAA = Average[50](mm)
    Vhigh = (VolumeMAA + ((VolumeMAA * 50) / 100))

    Spread3= Average[50](Spread1)
    Spread1 = High -low/2
    Spread2= Abs(High[0]-Low[0])
    WIDE= (Spread1[0] > Spread2[1]*1.8)
    NARROWS= Spread1[0] = open[0])
    DOWNBAR =(close[0] <= open[0])
    DOWNCLOSE=(Close[0]=(High[1]-((High[0]-Low[1])*0.3)))
    UP=max(UPCLOSE, UPBAR)
    Down= min(DOWNBAR, DOWNCLOSE)

    //Move Price
    if UP then
    DrawText(“▴”,barindex,low,SansSerif,bold,15)coloured(0,255,0)
    endif

    if Down then
    DrawText(“▾”,barindex,high,SansSerif,bold,15)coloured(200,0,0)
    endif

    //Divergence —- anomaly Price & Volume
    d = close – open
    DV1=(abs(open – close) mm and up
    DV2=open[1] < close and vol < vol[1] and close[1] vhigh[1] and DOWNclose and Close[2]>Close[3] and High[1]>High[2] and Vol d[1]*2 and d[1] > 0 and d 0 and vol d[1]*2 and d[1] > 0 and d 0 and vol > vol[1]
    DV= DV1 or DV2 or DV3 or DV4

    if DV then
    DrawText(“●”,barindex,High,SansSerif,bold,10)coloured(200,0,0)
    endif

    //NoDemand
    ND1= Vol[1] < vol[2] and UPCLOSE and DOWNBAR and (abs(open – close) <= (high – low)/2 )
    ND2 = vol < Vlow and Vol[0] close[1] and close > open and close <= open[1] and close[1] <= open and close – open < open[1] – close[1] ) and (abs(open – close) <= (high – low) * 5/100) and Vol[1] Close[2] and Close[1] < MIDCLOSE and narrows and Vol[1] < vol[2] and Vol[2] < vol[3])
    ND5=Close average[20](vol)

    NoDemand = ND1 or ND2 or ND3 or ND4 or ND5 and UPTHRUST

    if NoDemand then
    DrawText(“NODemand”,barindex,high+atr*1,SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(200,0,0)
    endif

    //Stopping Volume
    STPV1= Vol[0] > Vhigh[1] and Vol[1] > Vhigh[2]

    StoppingVolume = STPV1

    if StoppingVolume then
    DrawText(“StopVolume”,barindex,low-atr*0.5,SansSerif,bold,10)coloured(135,135,135)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(135,135,135)
    endif

    NSP1= (Close[1] < Close[2] and Close[1] Vhigh[2])
    NSP2 =Close > Close[1] and Low=Lowest[10](Low) and Vol>average[20](vol)

    //NO Supply
    NOSupply = NSP1 or NSP2

    if NOSupply then
    DrawText(“NOSupply”,barindex,low-atr*1,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,10)coloured(0,200,0)
    endif

    TESNSP1=(Close[1] UP and Vol[1] < Vol[2] and Vol[0] Vhigh[1] and vol[2] > vol[3] and Close[2]>Close[3] and High[1]>High[2]
    TESNSP3= wide and UP and Vol > Vhigh[1] and vol[2] > vol[3] and Close[2]<Close[3] and low[1]<low[2]

    //Test for Supply
    TESNSP = TESNSP1 or TESNSP2 or TESNSP3 and UPTHRUST

    if TESNSP then
    DrawText("Test for Supply",barindex,high+atr*1.8,SansSerif,bold,10)coloured(0,90,190)
    DrawText("●",barindex,high,SansSerif,bold,10)coloured(0,90,190)
    endif

    //"Reverse UPTHRUST"
    RUT1= (Close[1] < Close[2] and Close[1] vhigh[1] and vol[1] > vhigh[2] )

    ReverseUPTHRUST = RUT1

    if ReverseUPTHRUST then

    DrawText(“Reverse UPTHRUST”,barindex,low-atr*1.5,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,12)coloured(0,200,0)
    endif

    //UPTHRUST
    UT1 =(Close[1] > Close[2] and Close[1] > MIDCLOSE and Low[1] < Low[2] and Low[2] vol[2])

    UPTHRUST= UT1 and EffortToMoveDown

    if UPTHRUST then
    DrawText(“UPTHRUST”,barindex,high+atr*1.5,SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,10)coloured(200,0,0)
    endif

    //Effort To Move Down
    EFTD1=WIDE and DOWNBAR and DOWNCLOSE and vol > vhigh and Vol[1]>Vol[2]

    EffortToMoveDown =EFTD1

    if EffortToMoveDown then
    DrawText(“EffortToMoveDown”,barindex,high+atr*2, SansSerif,bold,10)coloured(200,0,0)
    DrawText(“●”,barindex,high,SansSerif,bold,12)coloured(200,0,0)
    endif

    //Effort To Move Up
    EFTU1=WIDE and UPBAR and UPclose and vol > vhigh and Vol[1]>Vol[2]

    EffortToMoveup = EFTU1
    if EffortToMoveup then

    DrawText(“EffortToMoveup”,barindex,low-atr*2,SansSerif,bold,10)coloured(0,200,0)
    DrawText(“●”,barindex,low,SansSerif,bold,12)coloured(0,200,0)
    endif

    Return

  6. avatar
    Alai-n • 06/20/2018 #

    The download link of the .itf file !!! Always returns on version 1 and not on version 2.

    • avatar
      TAC Bolsa • 06/20/2018 #

      Hello there is an error when copying the data in Prorealcode that we have reported …

      Please download new versions from this link.

      Version V3
      https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  7. avatar
    Alai-n • 06/20/2018 #

    When we copy the latest version in the comment section. Syntax error line 21 “)” which once corrected, returns a syntax error line 38 and 39!

  8. avatar
    TAC Bolsa • 06/20/2018 #

    Hello there is an error when copying the data in Prorealcode that we have reported …

    Please download new versions from this link.

    Version V3
    https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  9. avatar
    Alai-n • 06/20/2018 #

    Good… 😉

  10. avatar
    TAC Bolsa • 06/20/2018 #

    Please download new versions from this link.

    Version V4
    https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  11. avatar
    TAC Bolsa • 06/20/2018 #

    Please download new versions from this link.

    Version V5
    https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  12. avatar
    TAC Bolsa • 06/20/2018 #

    SHAKE OUT

  13. avatar
    kbrooks323 • 06/20/2018 #

    Is there a way to develop a scan for the shakeout?

  14. avatar
    TAC Bolsa • 06/20/2018 #

    Please download new versions from this link.
    Version V8
    https://www.tiburonesdealetacorta.com/2018/06/tac-vsa-volume-spread-analysis.html

  15. avatar
    Bon Zo • 06/20/2018 #

    Does this indicator repainting his signals or not? Thanks in advance for your answer.

  16. avatar
    Bon Zo • 06/20/2018 #

    or does this indicator lag in the way of displaying the defined signals or not?

    • avatar
      TAC Bolsa • 06/20/2018 #

      You have to use it in daily or higher graphs to make a correct volume analysis

      In market closures is when between arbitrage,blocks, hidden orders. etc..

  17. avatar
    Bon Zo • 06/20/2018 #

    Ok thanks a lot for your info and work.

  18. avatar
    Bon Zo • 06/20/2018 #

    Hello, the problem is that the UPTHRUST and SHAKEOUT signals are displaying with 8-9 days delay
    Is it normal or not?

  19. avatar
    Bon Zo • 06/20/2018 #

    ….in daily time frame

  20. avatar
    Bon Zo • 06/20/2018 #

    Can you send me an editable version 8 of this indicator or not?

    • avatar
      TAC Bolsa • 06/20/2018 #

      You confuse the reading of the volume.

      In order for a UPTHRUST to be fulfilled, it is followed by a valid Hidden Test and it does not recover the zone otherwise it would not be a UPTHRUST, the same case for the Shakeout.

      The indicator reads from the past and waits the future to mark signals can be given in the next candle or in 10 candles.

      Marked the signal with that delay where the test validates the price action.

      This indicator does not give a signal of entry or exit from the market.

      UPTHRUST or Shakeout is read in context after a test,

      These signals alone in the price is like having “a rocket without a deposit” Tom Wiliiams.

      Regarding the code can not be opened because it incorporates the cumulative delta and this code is private on all platforms.

      I recommend you read Wyckoff and then Tom Williams to understand this indicator.

    • avatar
      TAC Bolsa • 06/20/2018 #

      If you look for an indicator that is sailing, use the indicator
      https://www.prorealcode.com/prorealtime-indicators/bill-williams-profitunity/

  21. avatar
    Bon Zo • 06/20/2018 #

    Hey, thanks i made a little research with the links you provide on your website and i read Wyckoff so i understand what this whole thing is about now, Actually, there is a lot to read.
    As you said, i thought your indicator gave trading signals but when i read your comments above yesterday, i understood that you created this indicator for research purpose, it was too good to be true.
    I understand a little bit what is a shakeout now but as i am obstinate i am still wondering if a shakeout indicator could be created with other parameters that could be useful in the test in order to use less than 10 candles to insure the probability about the realisation of what we call “a shakeout” in modern trading. I checked also the Profitunity indicator yesterday and i am currently use it i think it is an excellent indicator for daytrading so crongratulation and thanks to you for having taken the time to answer my previous questions.

  22. avatar
    Kris75 • 06/20/2018 #

    Hi TAC,
    Thanks a lot for this great piece of work; -) MUCHAS gracias 😉
    did I read right, you cannot give us the conditions to identify the shakeout?

    • avatar
      TAC Bolsa • 06/20/2018 #

      All indicators share some code of other TAC indicators that improve the functioning of this …

      This in some cases has an owner .. and these do not authorize the sharing of the code but the yes use of the indicator by third parties with the code blocked.

      For my part, being the programmer to be grateful that they authorize us to share the indicator for free, even if it is blocked.

  23. avatar
    ramonjp • 06/20/2018 #

    Hi Tac,

    Great job. Please, can you provide latest code version of this indicator without any private code?

    Thanks in advance.
    Regards.

  24. avatar
    Tze Khai Lim • 06/20/2018 #

    Hi Tac, pls provide latest code version of this indicator. Thanks in advance.

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
avatar
Real Pro Great work gabri. I have this coded on Amibroker and I have done lots of backtesting but ne...
avatar
gabri Hi Real Pro, this indicator assists novices of the Wyckoff system. Wyckoff himself thought t...
avatar
tatie hi Gabri, I just came across the wyckoff method and was looking for the weiss wave indica...
avatar
Jesper Great share!
avatar
eckaw Hi Nicolas, I'm using this indicator when there is confluence over 3 different timeframes (5...
avatar
Nicolas Yes it is indeed possible. Create a topic in the screener forum and explain what you need an...
avatar
KyleReed i've been using this for a few days now and it's really helped me a lot in timing the execut...
avatar
Ben Ji Bonjour Nicolas, je souhaiterais exploiter votre screener sur la plateforme TradingView. Pou...
avatar
Nicolas Non désolé, je ne fournis pas de support pour cette plateforme.
avatar
luxrun Thanks, bolsatrilera, for a very good and solid screener!
avatar
luxrun sorry... indicator!
avatar
Lily Rios Gracias por el indicador, tengo una pregunta necesito programar un screener de valores que e...
avatar
mmoren44 no esta el color azul (Fade //Blue), No aparece en las barras el color azul.
avatar
larouedegann changer fade coloured (0,0,255)
avatar
Nicolas 1. yes 2. maybe yes?! 3. why not?
avatar
patapouf Bonjour Nicolas. Je viens de découvrir cet indicateur, que je trouve bien intéressant Mais...
avatar
Nicolas Tu peux modifier le paramètre "scalefactor" pour adapter la hauteur des barres à ton graphiq...
avatar
bolsatrilera EM MONEY FLOW INDEX + ALERTS //@version=3 // on platform Tradingview by DreamsDefined //a...
avatar
Carlos Garcia Enorme. Gracias!
avatar
Andraxx Buen indicador.... Gracias
avatar
TAC Bolsa Estas equivocado al 99,9%. La correlación entre las series de precios y volúmenes las des...
avatar
Domenec Si hablas de un indice regional como el Ibex es posible que sea asi yo nunca lo he operado y...
avatar
TAC Bolsa Regional de Mostoles, en una cosa tienes razón mejor dejarlo aquí...
avatar
Xusto Hello, Fully Agree, I will update it with your advice. Btw Can would you like share you co...
avatar
Niklas johansson hägglund do you now if it's possible to use this strategy with this code in tradingview also?
avatar
Alexander9 This code for metastock ?, can for amibroker . Thanks
avatar
TACBOLSA
6 years ago
Herrick Payoff Index
Herrick Payoff Index
#volume #volumes
12
Indicators
avatar
luxrun Thank you so much Tac BOLSA, I can not post the picture tonight I'll try tomorrow. I loaded ...
avatar
TAC Bolsa A new version of TAC Volume HPI DIV10.4 is available. that marks the divergence In the fo...
avatar
Raymundo Buenas tardes. Como puedo descargar algunos indicadores de esta pagina ?
avatar
mangiaragni Buongiorno io non riesco a visualizzare nessun tipo di volume , mi torna sempre una linea dr...
avatar
Nicolas Assicurati che lo strumento che stai guardando abbia dei volumi! È il caso?
avatar
Carlos Garcia If price tags the lower BBand, look for IIIX has positive values to enter a trade. Converse...
avatar
Thally Thanks for the quick response Nicholas. Would you have any idea how to resolve. Manually ref...
avatar
Thally Do you think adjusting the below code might help? newperiod = minuteminute[1] if newperi...
avatar
Nicolas There is no "second" instruction.
avatar
YvesRobert Merci beaucoup Nicolas. Existe t'il un petit programme qui permet de tracer sur la graphe en...
avatar
Nicolas Oui il y a celui ci: https://market.prorealcode.com/product/prt-renko/?lang=fr
avatar
YvesRobert Bonjour Nicolas, j'ai une question technique à te poser. Je visualise souvent le cours en RE...
avatar
GenesisEX Thank you all for your contributions this is a great submission. Thanks for your inputs.
avatar
tino Bonjour nicolas. Je ne parviens pas à recopier le screener de l'indicateur. Auriez vous la g...
avatar
Nicolas Quel screener svp? C'est dans un des sujets du forum? Merci de fournir le lien.
avatar
gabri Ha ragione in computer, ho sbagliato io BullAD = summation[period](ADvolbull*((Close-Low) –...
avatar
marcov66 Perfetto! Funziona. Grazie di tutto!
avatar
SkrHugo Bonjour, J'essaye d'utiliser le script avec le graphique renko mais sa ne marche pas, quelq...

Top