Optimized Trend Tracker OTT

Optimized Trend Tracker OTT

Optimized Trend Tracker OTT is an indicator that provides traders to find an existing trend or in another words to see which side of the current trend we are on.

We are under the effect of the uptrend in cases where the prices are above OTT ,
under the influence of a downward trend, when prices are below OTT.

The first parameter in the OTT indicator set by the two parameters is the period/length.

OTT will be much sensitive to trend movements if it is smaller. And vice versa, will be less sensitive when it is longer.

As the period increases it will become less sensitive to little trends and price actions.

In this way, your choice of period, will be closely related to which of the sort of trends you are interested in.

The OTT percent parameter in OTT is an optimization coefficient. Just like in the period
small values ​​are better at capturing short term fluctuations, while large values
will be more suitable for long-term trends.

In addition, when OTT is used with the support line in it, buy and sell signals
it will become a producing indicator.

You can use OTT default alarms and Buy Sell signals like:

1-
BUY when Prices are above OTT
SELL when Prices are below OTT

2-
BUY when OTT support Line crosses over OTT line.
SELL when OTT support Line crosses under OTT line.

3-
BUY when OTT line is Green and makes higher highs.
SELL when OTT line is Red and makes lower lows.

Text from his author: KivancOzbilgic

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. MaoRai54 • 84 days ago #

    Hi, many thanks for this indicator but it doesn’t work. Need to define the AverageTypeVAR

  2. Iván • 84 days ago #

    Hi! If you download the indicator the variable will be defined. Anyway here you have again with default parameters:

  3. Iván • 84 days ago #

    //PRC_Optimized Trend Tracker | indicator
    //version = 0
    //14.02.24
    //Iván González @ http://www.prorealcode.com
    //Sharing ProRealTime knowledge
    ////developer: ANIL ÖZEKŞİ
    //////inputs
    src = customclose
    length = 2 //OTT period
    percent = 1.4 //OTT percent
    showsupport = 1 //Show Support Line
    showsignalsk = 1 //Show Support Line Crossing Signals
    showsignalsc = 0 //Show Price/OTT Crossing Signals
    highlight = 0 //Show OTT Color Changes
    highlighting = 1 //Highlighter On/Off
    AverageTypeVAR = 1 // use VAR average
    mav = 1 //Moving Average Type
    ///////indicator
    ////VAR
    if barindex < 9 then
    var = src
    else
    valpha=2/(length+1)
    if src > src[1] then
    vud1= src-src[1]
    vdd1= 0
    elsif src < src[1] then
    vud1= 0
    vdd1=src[1]-src
    else
    vud1=0
    vdd1=0
    endif
    vUD=summation[9](vud1)
    vDD=summation[9](vdd1)
    vCMO=(vUD-vDD)/(vUD+vDD)
    VAR=(valpha*abs(vCMO)*src)+(1-valpha*abs(vCMO))*VAR[1]
    endif
    if barindex < length then
    Mavg = src
    dir = 1
    else
    if AverageTypeVAR then
    Mavg = var
    else
    Mavg=average[length,mav](src)
    endif
    fark = Mavg*percent*0.01

    longStop = Mavg – fark
    longStopPrev = longStop[1]

    if Mavg > longStopPrev then
    longStop = max(longStop,longStopPrev)
    else
    longStop = longStop
    endif

    shortStop = Mavg + fark
    shortStopPrev = shortStop[1]

    if Mavg < shortStopPrev then
    shortStop = min(shortStop,shortStopPrev)
    else
    shortStop = shortStop
    endif

    if dir = -1 and Mavg > shortStopPrev then
    dir = 1
    elsif dir = 1 and Mavg < longStopPrev then
    dir = -1
    else
    dir = dir[1]
    endif
    endif

    if dir = 1 then
    MT = longStop
    else
    MT = shortStop
    endif

    if Mavg > MT then
    OTT = MT*(200+percent)/200
    else
    OTT = MT*(200-percent)/200
    endif

    pALL = OTT[2]
    ///////////OTT colors
    if highlight then
    if OTT[2]>OTT[3] then
    r=76
    g=175
    b=80
    else
    r=255
    g=82
    b=82
    endif
    else
    r=184
    g=0
    b=117
    endif
    //////////print signals
    buysignal = Mavg crosses over OTT[2]
    sellsignal = Mavg crosses under OTT[2]

    if buysignal and showsignalsk then
    drawarrowup(barindex,low-0.25*averagetruerange[10](close))coloured(“green”)
    elsif sellsignal and showsignalsk then
    drawarrowdown(barindex,high+0.25*averagetruerange[10](close))coloured(“red”)
    endif

    buySignalc = src crosses over OTT[2]
    sellSignallc = src crosses under OTT[2]

    if buySignalc and showsignalsc then
    drawtext(“▲”,barindex,low-0.25*averagetruerange[10](close))coloured(“green”)
    elsif sellSignallc and showsignalsc then
    drawtext(“▼”,barindex,high+0.25*averagetruerange[10](close))coloured(“red”)
    endif

    if Mavg > OTT then
    r1=0
    g1=250
    b1=0
    else
    r1=250
    g1=0
    b1=0
    endif

    mplot = (high+low+close+open)/4

    if highlighting then
    colorbetween(mplot,pALL,r1,g1,b1,40)
    endif

    return Mavg*showsupport as “Media” coloured(0,0,250)style(dottedline,2),pALL as “OTT”coloured(r,g,b)style(line,2)

  4. MaoRai54 • 84 days ago #

    Thanks, now it’s OK. in your first code at line 15-16 it’s missing.

  5. Madrosat • 83 days ago #

    Hello Ivan
    Did you try a strategy with this indicator

  6. Iván • 83 days ago #

    Hi. No I didn’t. This is a code translation requested by an user a few days ago.

avatar
Register or

Likes

avatar avatar
Related users ' posts
Nicolas
11 months ago
Maxime Baudin Well done Nicolas, creative!
Stenozar Hi Nicolas, please can you explain how to read/use this indicator? thanks!
FXtonio @RICOU en 1 minutes avec un filtre de tendance ZLSMA 200 et eventuellement un rsi 7 , 69% de...
JC_Bywan For people interested in the screener: https://www.prorealcode.com/topic/screener-buy-sell-m...
octum Gracias NJicolas. Las lineas 35 y 36 dan fallo. (¿Es adrede para iniciados?) Puedes co...
Nicolas Yes, Magic if the variable that contains the value of the line, you can test if it goes up o...
dadah1987 Bonjour Nicolas, merci pour cet indicateur. Utilisant pour l'instant la création simplifié p...
Nicolas Merci d'ouvrir un sujet sur le forum avec une description complète du système.
GustavoLoboOrenstein Is it possible to add histogram with only increasing bars?
Nicolas Je ne rencontre pas ce problème avec le NASDAQ par exemple, ce serait plus simple d'ouvrir u...
YvesRobert Bonjour Nicolas, en effet ca marche, je me suis trompé, j'ai bien tout le tracé. C'est parce...
oliTR Bonjour, les conditions longCond et shortCond ne contiennent-elles pas une condition qui s'a...
Jiacky
2 years ago
Kalman Filter
Kalman Filter
0
Indicators
JohnScher Postscript: It's running in the live right now. One position after the other is opened. ...
ullle73 nice!! how's it been since your last post on going live? :)
thomas2004ch Hi, Is this strategy suitable for daily SPY? Regards
AndPar Buongiorno Nicolas, vorrei provare questo indicatore, ma quando lo inserisco in PRT mi vengo...
Nicolas Basta aggiungerlo al prezzo https://www.prorealcode.com/blog/video-tutorials/how-to-add-an-i...
Aragorna hello Nicolas, this indicator works with the last Beta version of PRT? Ive seen tha many in...
Darren Nash I found this works well on the DOW
thomas2004ch Hi John, Is your strategy suitable for daily SPY? Regards
gatowman Hi, ich bin leider Anfänger, habe den Code zwar importiert, aber scheinbar läuft er nicht au...
KAMJKAZE thanks, really interesting!
2c95 thanks, why do U prefer average than lowest ? to close under average does'nt mean another...
Stenozar Hi Sever, how can I visualize the coloured areas?
Sever Hi Stenozar, You need to add the color zones yourself , just go to Add Color Zone To set ...
atlante hi nicolas this indicator have 2 wrong borderline and islalastbarupdate. thank you can you h...
Nicolas That'"s because you are not using PRT v11? Just remove lines 59 to 62
Kanamax Hi Roberto, sorry for my confusing previous posts (forget them). My request is very simple,...
robertogozzi Please start a new topic in ProOrder support.
robertogozzi There you go: myMagicTrend = CALL “Magic Trend custom”[20, 14, 1, 5] alpha = 105 b = 0...
johann8 exactly :) Thank you all for the help!
max_92 Ciao Roberto, ho scaricato l'indicatore e come ti avevano già scritto sopra anch'io vedo la ...
Xenotrax A première vue, sa à l'air d'être un indicateur très puissant sur de petites temporalités, j...
merri Bonjour Nicolas, Comment transformer cet indicateur en bot sur PRT ?
Nicolas Cela a déjà été fait, voir ce sujet: https://www.prorealcode.com/topic/strategia-con-lindica...
Nicolas change the last line with: return v coloured(r,g,b) style(line,2), v+band coloured(168,168,1...
Paolo.B Thanks ... works as i wanted.
Kanamax Bonjour Nicolas, comme Paolo.B je souhaiterais utiliser cette indicateur au sein d'un code. ...
Boris Hi IVMcm, thanks for your amazing work. I have tested all of your indicators and use some of...
IV Mcm With pleasure and thanks!
ashiash how to use this indicator can i use tradingview platform

Top