Halftrend MACD

Here i have made a kind of MACD indicator from the halftrend indicator from the Great NICOLAS, after the improvement from him , I want to shared with everybody.

The histogram is made from the difference of 2 HalfTrend indicator (one long and one short period), then a signal line, built with an average of 6 periods of the histogram values is added.

Trades signals are the same than a normal MACD: long position when the histogram is crossing the zero line, short order when the histogram cross the zero level. The signal line can act the same, any crosses made with the histogram could result as an new order on market:

short signal when the signal line cross above the histogram and above the zero level
long signal when the signal line cross below the histogram and below the zero level

//PRC_HalfTrend MACD | indicator
//10.03.2017
//by LUCASSEN adapted code from 
//Nicolas @ www.prorealcode.com
//Sharing ProRealTime knowledge

//Amplitude1 = 2
//Amplitude2 = 6
//Amplitude3 = 30

// -- HL #1
lowpricei1 = Lowest[Amplitude1](low)
highpricei1 = Highest[Amplitude1](high)
lowma1 = average[Amplitude1](low)
highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then
trend1=1.0
nexttrend1=0
minhighprice1=highpricei1
endif

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then
trend1=0.0
nexttrend1=1
maxlowprice1=lowpricei1
endif

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then
up1=down1[1]
else
up1=Max(maxlowprice1,up1[1])
endif
down1=0.0

else

if(trend1[1]<>1.0) then
down1=up1[1]
else
down1=Min(minhighprice1,down1[1])
endif
up1=0.0
endif

endif





// -- HL #2
lowpricei2 = Lowest[Amplitude2](low)
highpricei2 = Highest[Amplitude2](high)
lowma2 = average[Amplitude2](low)
highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then
trend2=1.0
nexttrend2=0
minhighprice2=highpricei2
endif

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then
trend2=0.0
nexttrend2=1
maxlowprice2=lowpricei2
endif

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then
up2=down2[1]
else
up2=Max(maxlowprice2,up2[1])
endif
down2=0.0

else

if(trend2[1]<>1.0) then
down2=up2[1]
else
down2=Min(minhighprice2,down2[1])
endif
up2=0.0
endif

endif

if up2>0 then
halftrend2 = up2

else
halftrend2 = down2

endif

// -- HL #3
lowpricei3 = Lowest[Amplitude3](low)
highpricei3 = Highest[Amplitude3](high)
lowma3 = average[Amplitude3](low)
highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then
trend3=1.0
nexttrend3=0
minhighprice3=highpricei3
endif

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then
trend3=0.0
nexttrend3=1
maxlowprice3=lowpricei3
endif

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then
up3=down3[1]
else
up3=Max(maxlowprice3,up3[1])
endif
down3=0.0

else

if(trend3[1]<>1.0) then
down3=up3[1]
else
down3=Min(minhighprice3,down3[1])
endif
up3=0.0
endif

endif

if up3>0 then
halftrend3 = up3
else
halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

//PRC_HalfTrend MACD | indicator

//10.03.2017

//by LUCASSEN adapted code from

//Nicolas @ www.prorealcode.com

//Sharing ProRealTime knowledge

//Amplitude1 = 2

//Amplitude2 = 6

//Amplitude3 = 30

// -- HL #1

lowpricei1 = Lowest[Amplitude1](low)

highpricei1 = Highest[Amplitude1](high)

lowma1 = average[Amplitude1](low)

highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then

trend1=1.0

nexttrend1=0

minhighprice1=highpricei1

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then

trend1=0.0

nexttrend1=1

maxlowprice1=lowpricei1

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then

up1=down1[1]

else

up1=Max(maxlowprice1,up1[1])

endif

down1=0.0

else

if(trend1[1]<>1.0) then

down1=up1[1]

else

down1=Min(minhighprice1,down1[1])

endif

up1=0.0

endif

// -- HL #2

lowpricei2 = Lowest[Amplitude2](low)

highpricei2 = Highest[Amplitude2](high)

lowma2 = average[Amplitude2](low)

highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then

trend2=1.0

nexttrend2=0

minhighprice2=highpricei2

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then

trend2=0.0

nexttrend2=1

maxlowprice2=lowpricei2

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then

up2=down2[1]

else

up2=Max(maxlowprice2,up2[1])

endif

down2=0.0

else

if(trend2[1]<>1.0) then

down2=up2[1]

else

down2=Min(minhighprice2,down2[1])

endif

up2=0.0

endif

if up2>0 then

halftrend2 = up2

else

halftrend2 = down2

endif

// -- HL #3

lowpricei3 = Lowest[Amplitude3](low)

highpricei3 = Highest[Amplitude3](high)

lowma3 = average[Amplitude3](low)

highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then

trend3=1.0

nexttrend3=0

minhighprice3=highpricei3

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then

trend3=0.0

nexttrend3=1

maxlowprice3=lowpricei3

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then

up3=down3[1]

else

up3=Max(maxlowprice3,up3[1])

endif

down3=0.0

else

if(trend3[1]<>1.0) then

down3=up3[1]

else

down3=Min(minhighprice3,down3[1])

endif

up3=0.0

endif

if up3>0 then

halftrend3 = up3

else

halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

MACD trend trend following

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


supertiti • 04/06/2017 #
amplitude 1.2.3 = ( 2-6-30 ) or (1-1-27) ?

LUCASSEN • 04/06/2017 #
Hallo Supertiti
Macd amplitude=1-1-27 and prc halftrend triple in Heikin Ashi grafiek amplitude =2-6-10
greetings Lucassen

supertiti • 04/06/2017 #
Thanks you so much Lucassen

dreif123 • 04/06/2017 #
hi, copied the above code, not working on 10.3
the system says “return can only be used at proBuilder….what do i have todo ?

LUCASSEN • 04/06/2017 #
Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, that men nows a lot over indicators.
greetings Lucassen

Anthony2A Bjr, j ai des erreurs sur la ligne 69, 74, 78 et 80. sur drawcandle drawtext et endif. si ...

Lucas0000 Hello, Congratulations on this programming, it seems incredible to me, I am new to this but ...

plbourse Hello, I am trying to use this singal (in fact I have converted it to an indicateur giving B...

FXtonio @RICOU en 1 minutes avec un filtre de tendance ZLSMA 200 et eventuellement un rsi 7 , 69% de...

JC_Bywan For people interested in the screener: https://www.prorealcode.com/topic/screener-buy-sell-m...

octum Gracias NJicolas. Las lineas 35 y 36 dan fallo. (¿Es adrede para iniciados?) Puedes co...

Nicolas Yes, Magic if the variable that contains the value of the line, you can test if it goes up o...

dadah1987 Bonjour Nicolas, merci pour cet indicateur. Utilisant pour l'instant la création simplifié p...

Nicolas Merci d'ouvrir un sujet sur le forum avec une description complète du système.

Nicolas Je ne rencontre pas ce problème avec le NASDAQ par exemple, ce serait plus simple d'ouvrir u...

YvesRobert Bonjour Nicolas, en effet ca marche, je me suis trompé, j'ai bien tout le tracé. C'est parce...

oliTR Bonjour, les conditions longCond et shortCond ne contiennent-elles pas une condition qui s'a...

JohnScher Postscript: It's running in the live right now. One position after the other is opened. ...

ullle73 nice!! how's it been since your last post on going live? :)

thomas2004ch Hi, Is this strategy suitable for daily SPY? Regards

DELBERT Bonsoir , Nicolas , j'ai transféré votre indicateur sur ma PRT 10,3 et j'ai un méssage d'ére...

Nicolas Vous pouvez essayer en remplacant la ligne avec: vwapsd = sqrt(average[lengthz](square(clo...

DELBERT Bonsoir , merci Nicolas , a bientôt .

AndPar Buongiorno Nicolas, vorrei provare questo indicatore, ma quando lo inserisco in PRT mi vengo...

Nicolas Basta aggiungerlo al prezzo https://www.prorealcode.com/blog/video-tutorials/how-to-add-an-i...

Aragorna hello Nicolas, this indicator works with the last Beta version of PRT? Ive seen tha many in...

wally Hola soy nuevo en el mudo robots. Alguien seria tan amable de poner el archivo itf.file ya q...

Darren Nash I found this works well on the DOW

thomas2004ch Hi John, Is your strategy suitable for daily SPY? Regards

Share this

Likes