Support & Resistance with moving averages

We know that some popular indicators are supportive and resistant.

We have the most widespread moving averages, namely MM20 – MM50 – MM100 – MM200 of Simple Type
Also Ichimoku, this indicator was designed to give levels of support and resistance.

If you apply all these indicators on the same chart, your vision will be distorted by too many lines, especially if you want to add the pivot points .

So I have coded this small indicator that groups together the current levels of all the components mentioned above for more comfort.

You can activate or deactivate a component as an external variable.

//
//=/===============/=//=/===============/=//=/ Indicator Support & Resistance
//

defparam drawonlastbaronly = true

//MM20 = 1
//MM50 = 1
//MM100 = 1
//MM200 = 1

//SSA = 1
//SSB = 1
//Tenkansen = 1
//Kijunsen = 1

//
//=/===============/=//=/===============/=//=/ Support Resistance
//

//=/ Support 20
if MM20 then
S20    = average[20](close)
drawtext("========== 20",barindex,S20,Dialog,Bold,10) coloured (RS20,GS20,BS20)
endif

if close > S20 then
RS20 = 102
GS20 = 102
BS20 = 102

elsif close < S20 then
RS20 = 0
GS20 = 153
BS20 = 255

endif

//=/ Support 50
if MM50 then
S50    = average[50](close)
drawtext("========== 50",barindex,S50,Dialog,Bold,10) coloured (RS50,GS50,BS50)
endif

if close > S50 then
RS50 = 102
GS50 = 102
BS50 = 102

elsif close < S50 then
RS50 = 0
GS50 = 153
BS50 = 255

endif

//=/ Support 100
if MM100 then
S100    = average[100](close)
drawtext("  ========== 100",barindex,S100,Dialog,Bold,10) coloured (RS100,GS100,BS100)
endif

if close > S100 then
RS100 = 102
GS100 = 102
BS100 = 102

elsif close < S100 then
RS100 = 0
GS100 = 153
BS100 = 255

endif

//=/ Support 200
if MM200 then
S200    = average[200](close)
drawtext("  ========== 200",barindex,S200,Dialog,Bold,10) coloured (RS200,GS200,BS200)
endif

if close > S200 then
RS200 = 102
GS200 = 102
BS200 = 102

elsif close < S200 then
RS200 = 0
GS200 = 153
BS200 = 255

endif

//=/ SpanA
if SSA then
SpanA = (Tenkan[26]+Kijun[26])/2
drawtext("       ========== SpanA",barindex,SpanA,Dialog,Bold,10) coloured (RSpanA,GSpanA,BSpanA)
endif

if close > SpanA then
RSpanA = 102
GSpanA = 102
BSpanA = 102

elsif close < SpanA then
RSpanA = 0
GSpanA = 153
BSpanA = 255

endif

//=/ Tenkan
if Tenkansen then
Tenkan = (highest[9](high)+lowest[9](low))/2
drawtext("        ========== Tenkan",barindex,Tenkan,Dialog,Bold,10) coloured (RTenkan,GTenkan,BTenkan)
endif

if close > Tenkan then
RTenkan = 102
GTenkan = 102
BTenkan = 102

elsif close < Tenkan then
RTenkan = 0
GTenkan = 153
BTenkan = 255

endif

//=/ Kijun
if Kijunsen then
Kijun = (highest[26](high)+lowest[26](low))/2
drawtext("     ========== Kijun",barindex,Kijun,Dialog,Bold,10) coloured (RKijun,GKijun,BKijun)
endif

if close > Kijun then
RKijun = 102
GKijun = 102
BKijun = 102

elsif close < Kijun then
RKijun = 0
GKijun = 153
BKijun = 255

endif

//=/ SpanB
if SSB then
SpanB = (highest[52](high[26])+lowest[52](low[26]))/2
drawtext("       ========== SpanB",barindex,SpanB,Dialog,Bold,10) coloured (RSpanB,GSpanB,BSpanB)
endif

if close > SpanB then
RSpanB = 102
GSpanB = 102
BSpanB = 102

elsif close < SpanB then
RSpanB = 0
GSpanB = 153
BSpanB = 255

endif

//
//=/===============/=//=/===============/=//=/ End
//

return

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

//=/===============/=//=/===============/=//=/ Indicator Support & Resistance

defparam drawonlastbaronly = true

//MM20 = 1

//MM50 = 1

//MM100 = 1

//MM200 = 1

//SSA = 1

//SSB = 1

//Tenkansen = 1

//Kijunsen = 1

//=/===============/=//=/===============/=//=/ Support Resistance

//=/ Support 20

if MM20 then

S20 = average[20](close)

drawtext("========== 20",barindex,S20,Dialog,Bold,10) coloured (RS20,GS20,BS20)

endif

if close > S20 then

RS20 = 102

GS20 = 102

BS20 = 102

elsif close < S20 then

RS20 = 0

GS20 = 153

BS20 = 255

endif

//=/ Support 50

if MM50 then

S50 = average[50](close)

drawtext("========== 50",barindex,S50,Dialog,Bold,10) coloured (RS50,GS50,BS50)

endif

if close > S50 then

RS50 = 102

GS50 = 102

BS50 = 102

elsif close < S50 then

RS50 = 0

GS50 = 153

BS50 = 255

endif

//=/ Support 100

if MM100 then

S100 = average[100](close)

drawtext(" ========== 100",barindex,S100,Dialog,Bold,10) coloured (RS100,GS100,BS100)

endif

if close > S100 then

RS100 = 102

GS100 = 102

BS100 = 102

elsif close < S100 then

RS100 = 0

GS100 = 153

BS100 = 255

endif

//=/ Support 200

if MM200 then

S200 = average[200](close)

drawtext(" ========== 200",barindex,S200,Dialog,Bold,10) coloured (RS200,GS200,BS200)

endif

if close > S200 then

RS200 = 102

GS200 = 102

BS200 = 102

elsif close < S200 then

RS200 = 0

GS200 = 153

BS200 = 255

endif

//=/ SpanA

if SSA then

SpanA = (Tenkan[26]+Kijun[26])/2

drawtext(" ========== SpanA",barindex,SpanA,Dialog,Bold,10) coloured (RSpanA,GSpanA,BSpanA)

endif

if close > SpanA then

RSpanA = 102

GSpanA = 102

BSpanA = 102

elsif close < SpanA then

RSpanA = 0

GSpanA = 153

BSpanA = 255

endif

//=/ Tenkan

if Tenkansen then

Tenkan = (highest[9](high)+lowest[9](low))/2

drawtext(" ========== Tenkan",barindex,Tenkan,Dialog,Bold,10) coloured (RTenkan,GTenkan,BTenkan)

endif

if close > Tenkan then

RTenkan = 102

GTenkan = 102

BTenkan = 102

elsif close < Tenkan then

RTenkan = 0

GTenkan = 153

BTenkan = 255

endif

//=/ Kijun

if Kijunsen then

Kijun = (highest[26](high)+lowest[26](low))/2

drawtext(" ========== Kijun",barindex,Kijun,Dialog,Bold,10) coloured (RKijun,GKijun,BKijun)

endif

if close > Kijun then

RKijun = 102

GKijun = 102

BKijun = 102

elsif close < Kijun then

RKijun = 0

GKijun = 153

BKijun = 255

endif

//=/ SpanB

if SSB then

SpanB = (highest[52](high[26])+lowest[52](low[26]))/2

drawtext(" ========== SpanB",barindex,SpanB,Dialog,Bold,10) coloured (RSpanB,GSpanB,BSpanB)

endif

if close > SpanB then

RSpanB = 102

GSpanB = 102

BSpanB = 102

elsif close < SpanB then

RSpanB = 0

GSpanB = 153

BSpanB = 255

endif

//=/===============/=//=/===============/=//=/ End

return

ichimoku moving average resistance support support and resistance

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


fazel53 • 11/02/2020 #
How do i attach this indicator to my mt5 platform?
- Nicolas • 11/02/2020 #
  You can’t! All indicators here are for ProRealTime trading platform: https://www.prorealtime.com

Wing There's a few threads on the forum about backtest and live trades being different at times. ...

ET I agree with verdi55. As it is now, the code will only test for a breakout on the upside (li...

Philipjonasson are u still active Wing?

nwesterhuijs Thanks, only saw it just now.

juanj For the latest version and discussions see the Ichimoku thread here: https://www.prorealcod...

Louwrens Hi Juanj. Thanks for this. I am tying it as we speak. It does not trade that often, which is...

Rafa Hay una actualización de esta estrategia. Si miras mis posts es más robusta el screener. Un ...

javier.puig.rovira@gmail.com Cruce te refieres a: Tenkan Sen, con Kijun Sen?

Rafa Hola Javier, Perdona pero no entiendo tu pregunta, no veo ninguna variable que sea solo "cru...

Nicolas We do not offer free assistance for TOS. However, you can send demand for private paid codin...

phanz Hi community. May I know how you use this indicator please? Is it on the zero cross over? ...

sydney43025 Hello, I'm digging up this topic because I uploaded the code on a PRT v11.1 but the indicato...

bearbull As per PhilipSchultz question above, has anybody managed to add code for when it turns blue,...

Ybr35 Bonjour Nicolas, lorsque je lance l'indicateur, il m'est indiqué que je dois définir les var...

Nicolas L'idéal est de télécharger le fichier itf joint sur cette page et de l'importer dans la plat...

Nicolas Merci dans ce cas d'ouvrir un sujet dans le forum ProScreener svp.

Andrea Hi Nicolas, thx for your code. Please i need your help to understand this part of your code:...

Nicolas the MA200 is ascending since 20 periods.

Leo Hi Gabri, have you ever try this in a trading system?

gabri Leo, I used to crosscheck this indicator a long time ago. For the trading I was doing at tha...

Nolubok Bonjour Gabri, merci pour l'ensemble de vos publications, serait il possible d'avoir le scr...

David Somogyi Hello, This is merely a filter indicator for measuring high fractality, which helps to av...

bertrandpinoy bonjour ce code fonctionne toujours?

Nicolas Faites un backtest, vous aurez des réponses.

Krallenmann Hallo Nicolas, kannst du mir die Regeln für den Halftrend Indikator sagen? Aus dem Code kann...

davefransman Dear Nicolas, i want set a alert on the "HalfTrend "custom moving average" met Heikin Ashi w...

Nicolas Please post the question in a new forum topic, that would need custom coding I believe.

Iber0 Asi quedaria con el spread de IG [IMG]http://i65.tinypic.com/2418ism.jpg[/IMG]

bjoern Seems to work nice on BUND - M15 with SL 70 and TP 120

hvluthy@sunrise.ch I tried to backtest this code but don't get any restults. Can any body help me?

Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....

CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...

Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...

Sofitech Ce code n'est valable que sur la V10.3 ? sur le 10.2 il y a une erreur de syntaxe dans le fi...

Nicolas Oui en effet, c'est un indicateur "10.3" à cause uniquement de la mise en forme des courbes ...

Nicolas En effet, c'est le cas si on copie/colle le code. Ces 2 variables sont inscrites en externes...

Salocin Hello Nicolas, my french is not that well. It occurs an error which can not be solved by cop...

Nicolas Just download the ITF file and import it into your platform, follow these easy steps: https:...

gabri Great job!! I love everything that involve Ichimoku. Did you think about changing the line t...

Rohan Thanx gabri. Yes I did play around with the offset. It works but I like the "earlier" warnin...

Dom Dominics Hi, Is this code can be used for MT4 ?

gabri Ichimoku is one of the best trend indicator ever together with the Guppy EMA's. I agree with...

primo1 thanks

traderkarnik Rohan, Have you tried encorporating momentum indicator? if waiting for future cross in your...

pascal3431 Salut Doc , Je ne vois pas ce qui fait office de stop dans ce code .. un retour dans le nua...

Doctrading Bonjour, Il s'agit juste d'une stratégie où on est toujours en position : soit à l'achat / ...

pascal3431 Bonjour, après quelques essais sur EUR/USD au M15 en rajoutant(car sinon on est en perte) u...

Share this

Likes