Market force & trend entries/exit

v10.3
Market force & trend entries/exit

This indicator explains in a continuous way what is happening in the market if there is more demand than supply with which the price of the instrument has an upward trend if, on the contrary, there is more supply than demand, so the price then takes bearish trend or if on the contrary there is no interest in any sense with what the price remains in a lateral range
Summarizing marks the strength of the market and also on both ends both when there is no interest and when the market makes a maximum volume of recruitment marks quite clearly the areas of change of trend.

The different zones indicated by this Indicator are the following if, for example, the instrument has reached a high volume of contracting and can not continue with the current trend or impulse as the price changes direction will begin to appear in red or FF35, F30, F8, F6, F4, F2, Doubts, Extrem (Extremaucion) Death on the other hand when it is in any of these low areas and the price starts to pick up again force or impulse (in the previous direction or in the new one address) will begin to appear in blue the following messages Resurr (Resurrection), Blow (Blow of Life), Saluci (Leaving the ICU), Goodbye, Trade, F2, F4, F6, F8, F30, FF35, FF40, Danger, Danger, Boom, Megaboom, max.vol

It is very important to be aware of the areas F30, FF35, FF40, because they are usually the areas of change of direction of the price to make intermediate corrections if the impulse goes from these heights without losing strength and reaches Danger, or Danger in these areas that are sure to have a high volatility must be alert to any pattern or other signal because the change of direction should be imminent in the next 2 or 3 candles maximum to the appearance of the message and if it reaches Boom then the change should be righ now.
As in almost all oscillators indicators to greater temporality more accuracy of the price response with signals and in very small frametimes sometimes the answer is not so immediate just as a curiosity if someone installs it in their equipment to prove it open the graph from Diario del Dow to see well the whole sequence in the long trend that ended with the last historical maximum there is perfectly the functioning of the indicator.

As a final curiosity we have a couple of candles to delay the manual operation but two messages written in case we are clueless. Entry in green color and closing in red color, however, your information is supportive if you manually operate it is much more high the profitability of the trade I DO NOT BELIEVE IN AUTOMATED SYSTEMS My robots at least do not have Gray Matter On the other hand if we use them as signals if they give very high profitability
This Indicator is only meant to support the operations of our trades, knowing at all times what the direction of the trend is and when to leave. If someone tries to look for signals with the messages E (green) and R (Red), be aware that before you should have done an extensive study with different graphics and different temporalities is not intended to operate using these signals are only intended to be helpful

To understand the meaning of this indicator, which is exactly what it shows and why I recommend watching video https:www.youtube.com/watch?v=crYYnTH5Qz0 and if we join this indicator with the indicator of the colored candles that are in this same library uploaded by me then if we have a very powerful system and when it is known very safe to operate any instrument the sum of both indicators can see it in the video

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. pableitor • 06/14/2018 #

    Hola Domenec, un indicador muy original y util que ciertamente añade mucha informacion a la evolución de las cotizaciones. Pero tengo una duda: Cual es el motivo de calcular el ADX paso a paso (valor miadx en lineas 161 hasta 186 ) cuando lo puedes hacer en un solo paso sencillo con miadx = ADX[14] ?

  2. Domenec • 06/14/2018 #

    Hola Pableitor porque aqui lo que pretendo es programar un nuevo codigao mas ajustado para que de señales de entrada cierre para ayudar a comprender mejor el funcionamiento del mercado si lo pruebas veras que es muy logico que en f30 ff35 ff40 haga los movimientos correctivos intermedios y posteriormente siga el impulso sobre todo en los movimientos importantes entonces la idea es que la señal de entrada y cierre que con el adx normal lleva un par de velas de retraso al estar el codigo abierto del adz se puedan cambiar con alguan constante o cambiando las medias para conseguir una señal mas precisa pero esto lleva su tiempo pero esta es la idea por lo que incluye la programacion del adx en codigo abierto en estas lineas que me comentas

  3. Juanjo • 06/14/2018 #

    Hola Domenec.
    He visto en los videos que hablas continuamente de mercado de futuros con gráficos de minutos. ¿podria aplicar tu indicador a acciones en temporalidad diaria y 4 horas?
    Gracias por tus aportes

  4. Domenec • 06/14/2018 #

    Claro Juanjo de todas maneras en deinversoratrader.com tienes estsos osciladores evolucionados y si son para cualquier tempo suerte

  5. Dron • 06/14/2018 #

    Hola Domenec, en la descripción hablas del indicador velas de colores, no lo encuentro en la biblioteca, donde lo podría descargar? Gracias

  6. Domenec • 06/14/2018 #

    Hola Dron mira en el blog deinversoratrader.com en formacion indicadores ahi hay varios gratuitos y la explicacion detallada de como van

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar

+2 more likes

Related users ' posts
Francesco78 Hi Pepmartorell, please let's continue the discussion on the forum thread so that we can sha...
Francesco78 Hi Pepmartorell, please let's continue the discussion on the forum thread so that we can sha...
Jusmih1 Hi there, i am looking at your Strategy however when you put in automatic trading mode its ...
reb Hello Marc your strat seems very intersting, will take a look Reb
897148 What exactly is meant by Total price? Is r1 =28 in your example the no of days for "Total P...
finplus Thanks for the job. Which variables do you suggest for timeframe 1 hour? 
Maz Depends massively on your market and the volatility. I suggest using the variable optimizer ...
1Randy This a great momentum filter! I would like to see volume momentum incorporated into the indi...
otty82  THX looks good!
century nice one , thank you
arvindrao01 Hey! Does anyone have a pinescript (tradingview) code for this?
imokdesign Hi Everybody, when I look at the strategy I felt the need to implement a Moneymanagement-Sy...
Inertia newlevel then multiplier=multiplier+1 oldlevel=newlevel newlevel=strategyprofit+startequi...
Inertia Hi Bjoern, I was playing around with your code this morning (EUR/USD 5'). Thank you to the...
CavalierDeCesDames Bonjour Nicolas, Thanks for your use full job. I tried this indicator on a shorter timefram...
Nicolas You are welcome. I'm glad you like it.
Bolbo It does not appear over the price indicator on V11. Thanks in advance.
bearbull As per PhilipSchultz question above, has anybody managed to add code for when it turns blue,...
Ybr35 Bonjour Nicolas, lorsque je lance l'indicateur, il m'est indiqué que je dois définir les var...
Nicolas L'idéal est de télécharger le fichier itf joint sur cette page et de l'importer dans la plat...
Nicolas Merci dans ce cas d'ouvrir un sujet dans le forum ProScreener svp.
Andrea Hi Nicolas, thx for your code. Please i need your help to understand this part of your code:...
Nicolas the MA200 is ascending since 20 periods.
Regan2020 Hi, has anybody update the above code to enable on a 15m or 5m TF?
gigi64 ik heb de code op mijn pro realtime gezet , en bij indicator staat hij erbij maar komt niet ...
gigi64 I have put the code on my pro realtime, and it is on the indicator, but it does not appear o...
supertiti Thanks you so much Lucassen
dreif123 hi, copied the above code, not working on 10.3 the system says "return can only be used at ...
LUCASSEN Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, tha...
Krallenmann Hallo Nicolas, kannst du mir die Regeln für den Halftrend Indikator sagen? Aus dem Code kann...
davefransman Dear Nicolas, i want set a alert on the "HalfTrend "custom moving average" met Heikin Ashi w...
Nicolas Please post the question in a new forum topic, that would need custom coding I believe.
Lyam Pareil ne marche pas dommage
ahmedbouaziz89 Bonjour, quand j'ajoute le code ou le fichier dans l'outils screeners de Prorealtime je ne v...
tyvix Bonjour le code marche bien c est juste qu'il n y a pas d opportunité au moment ou vous le...
verdi55 Is there such a thing as a free lunch ?
maceng Thanks Nicolas for this great work! I would like to understand the math behind it in order t...
Nicolas Sorry I have no time to provide assistance for python programmers. Have a good day.
Maz Hi all, firstly happy to know that this is helping you. I look into updating it for PRT11 wh...
Nicolas just use 3 times a linear regression channel code you will find in the library.
leederbyshire Here's the link to alternative linear regression channel indicator Nicolas is referring to t...
Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....
CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...
Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...
Nicolas Je vais faire l'indicateur et expliquer comment en même temps dans un sujet de forum. Plus s...
gregus merci nicolas toute ma gratitude est pour toi sa sera bien pratique car je pense ne pas etre...
Nicolas Ok merci donc d'ouvrir un sujet spécifique pour cette demande donc :) 
algotrader This indicator looks coolBut on attempt to use it for a strategy dev'I get an error.."The in...
dajvop @algotrader if you at the bottom of the code add: RETURN Buffer1 as "up", Buffer2 as "down",...
Bateson Si cela peut servir, l'indicateur Sadukey a été créé en utilisant un générateur de filtre ap...
Nicolas
9 years ago
ALMA MACD
ALMA MACD
7
Indicators
Arnaud HALVICK Great indicator, thank you!
JMat45 Hi Nicolas, just reviewing this indicator and noticed that you have double assigned the vari...
Nicolas That would not make any difference because the code is read from top to bottom.
MikeGC I don't know if you have used the variables a and b to optimise the parameters for the Super...
gianpiero75 I have not optimized, I multiplied the parameters for 6 (5,8), to use them on the 4  hoursTF...
bertrandpinoy bonjour Mike j utilise TrendChaser V2.0 et quand il prend position cela ne programme pas le ...

Top