Tushar Chande’s DMI (with RSX)

v10.3
Tushar Chande’s DMI (with RSX)

An indicator used in technical analysis that determines the overbought and oversold conditions of a particular asset. This indicator is very similar to the Relative Strength Index (RSI). The main difference between the two is that the RSI uses a fixed number of time periods (usually 14), while the Dynamic Momentum Index uses different time periods as volatility changes.

This indicator is interpreted in the same manner as the RSI where the readings below 30 are deemed to be oversold and more than 70 levels are deemed to be overbought. The number of time periods used in the dynamic momentum index decreases as the volatility of the underlying asset increases, making this indicator more sensitive to price changes than the RSI. This version has an additional smoothing in an RSX usage form for calculating the original RSI pitch. It has been added to make it a little more readable. The DMI Chande is less smooth than this original version and can raise more false signals. Using the RSX instead of RSI not add any lag at all, so we can say that using an RSX instead of RSI could be classified as “1% improvement” rule – which is sure it not be worse than the original Chande’s DMI.

(description found on internet). Indicator translated from Metatrader5 version by a request in forum.

Settings explanation:

_ MAStdDevMode : moving average type for smoothing the ATR value used to get the volatility of the current instrument

_ DmiLowerLimit & DmiUpperLimit : bounds for DMI periods (DMI calculated period can’t be less or more than these 2 limits)

 

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. macbartin • 01/31/2018 #

    Bonjour, merci pour l’indicateur, j’utilise un RSI de 7 période, sur du 1 min, est’il possible de changer sa base de période ? si oui comment faire ? merci encore j’avais pas pensé que le RSI pouvait avoir du retard !

    • Nicolas • 01/31/2018 #

      Changer la base de périodes du RSI original ? Le RSI a du “retard” puisqu’il est toujours nécessaire d’évaluer le terrain (et donc de regarder le passé) pour donner l’information sur la bougie courante.

    • macbartin • 01/31/2018 #

      merci, je voulais savoir quel paramètre il faut modifier sur votre indicateur pour le modifier sur la période 7 de votre indicateur

    • Nicolas • 01/31/2018 #

      Cet indicateur est dynamique, il n’utilise pas de période fixe

  2. falco44 • 01/31/2018 #

    Bonjour Nicolas,
    Lorsque j’importe l’indicateur via l’itf et que je l’attache au graphique, il apparait ce message “Erreur dans l’indicateur : PRC_DMI of RSX (5 8 0 15 10 50 60 40) — Un parametre de type entier positif est attendu avec SUMMATION”.
    Pourrais-tu m’eclairer à ce sujet stp ?
    Je suis sur la v11 de prt.
    Merci à toi,
    Cordialement,
    Romain

    • Nicolas • 01/31/2018 #

      Dans ce cas, il faut changer les lignes qui comportent l’instruction SUMMATION comme ceci: summation[max(1,RSIterm)]

  3. falco44 • 01/31/2018 #

    Bonjour Nicolas, je suis desolé mais cela ne fonctionne toujours pas …
    Merci de ton retour

  4. AG1 • 01/31/2018 #

    Hello Nicholas
    Is it possible to attach a revised code?
    I tried to change according to your instructions but the indicator is not working yet.
    Thanks in advance for your help
    Alex

    • Nicolas • 01/31/2018 #

      PFA below a revised version:
      //PRC_DMI of RSX | indicator
      //31.01.18
      //Nicolas @ http://www.prorealcode.com
      //Sharing ProRealTime knowledge
      //translated from MT5 code
      //https://www.prorealcode.com/topic/tushar-chandes-dmi-conversion-code-mq5-to-prorealtime/

      // — settings
      StdDevPeriod = 5 // Period of Standard Deviation
      MAStdDevPeriod = 8 // Period of smoothing
      MAStdDevMode = 0 // Mode of smoothing MA
      DMIPeriod = 15 // Dynamic Momentum Index Period
      DmiLowerLimit = 10 // Dynamic Periods Lower Bound
      DmiUpperLimit = 50 // Dynamic Periods Upper Bound
      LevelUp = 60 // Lower level
      LevelDown = 40 // Upper level
      // — end of settings

      if barindex>DMIperiod then
      SD = STD[StdDevPeriod](customclose)
      ASD = Average[MAStdDevPeriod,MAStdDevMode](SD)

      RSIterm = max(1,ROUND(DMIPeriod / (SD/ASD)))
      RSIterm = Max(Min(RSIterm,DmiUpperLimit),DmiLowerLimit)

      //RSI calculation
      plus = summation[max(1,round(RSIterm))](customclose-customclose[1]>0)
      minus = summation[max(1,round(RSIterm))](customclose-customclose[1]per then
      beta = 0.45*(per-1)/(0.45*(per-1)+2)
      if pow=1 then
      alpha = beta
      elsif pow=2 then
      alpha = beta*beta
      elsif pow=3 then
      alpha = beta*beta*beta
      elsif pow=4 then
      alpha = beta*beta*beta*beta
      elsif pow=5 then
      alpha = beta*beta*beta*beta*beta
      else
      alpha = beta
      endif

      tmp0 = (1-alpha)*plus + alpha*tmp0[1]
      tmp1 = (plus – tmp0[0])*(1-beta) + beta*tmp1[1]
      tmp2 = tmp0[0] + tmp1[0]
      tmp3 = (tmp2[0] – tmp4[1])*((1-alpha)*(1-alpha)) + (alpha*alpha)*tmp3[1]
      tmp4 = tmp4[1] + tmp3[0]
      avgplus = tmp4

      ftmp0 = (1-alpha)*minus + alpha*ftmp0[1]
      ftmp1 = (minus – ftmp0[0])*(1-beta) + beta*ftmp1[1]
      ftmp2 = ftmp0[0] + ftmp1[0]
      ftmp3 = (ftmp2[0] – ftmp4[1])*((1-alpha)*(1-alpha)) + (alpha*alpha)*ftmp3[1]
      ftmp4 = ftmp4[1] + ftmp3[0]
      avgminus = ftmp4

      endif

      RS = avgplus/avgminus
      DMIRSX = 100 – 100 / ( 1 + RS )

      r=100
      g=100
      b=100
      if DMIRSX>LevelUp then
      r=0
      g=255
      b=0
      elsif DMIRSX<LevelDown then
      r=255
      g=185
      b=15
      endif
      endif

      return DMIRSX coloured(r,g,b) style(line,3) as "Dynamic Momentum Index", levelup coloured(100,100,100) style(dottedline) as "level up", leveldown coloured(100,100,100) style(dottedline) as "level down"

  5. AG1 • 01/31/2018 #

    Thanks Nicolas
    Still a problem in line 29
    Please take a look.
    thanks again
    Alex

    • Nicolas • 01/31/2018 #

      code is modified in the above post, use that one.

    • AG1 • 01/31/2018 #

      Still a problem in line 29
      Please take a look.
      thanks again
      Alex

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
Vinks_o_7 Vonasi you're a beast !!! ;-)))
pableitor Amazing indicator , you are pushing PRT to the limit! But looking at the scatter its not c...
Zigo
4 years ago
fifi743 Good morning, there is no mistake about the shorts c11=SMI[14,3,5](close)>-40
Zigo has to be c11=SMI[14,3,5] < -40 (indeed)
xar3 Thank you ;-) Zigo
Sapo Thank you very much. as always your indicators are extremely effective. kind regards Vonasi.
mitsu21 Hi, it looks nice. I'll try it tomorrow thank you for your share kind regards bruno
kj1988 Thank you Vonasi for sharing this indicator. Very useful as a comfirmation to the price act...
ggolfet Thanks Nicolas, I imported the itf file and solved the problem.
Hasardeur Hallo Nicolas, i tried to code the multi period heat map in combination with the Ehler’s ...
Nicolas Please open a new topic with the code in forum.
Marie-Eve Vergoz lorsque je copie les codes, le système me signale des erreurs à la ligne 12 et suivantes
Marie-Eve Vergoz sorry - tout est ok -
AlgoAlex
5 years ago
Marcot18 Alex ti sei superato
AlexF Esagerato!
jobswaps Sube como trazar lineas de tendencias a tantas barras
Frankiesc interesting indicator !! Thanks for sharing!!!
robertogozzi Thank you :)
phanz Hi ... what are the conditions for buy signal using this indicator? Tks
JJ Tec Hola Las condiciones de entrada / salida vienen en el libro de J. Carter Mastering the trad...
Pixeldd Ich bekomme beim einfügen des Indikators einen Fehler angezeigt. Was bitte muss ich genau än...
sir_i Bonjour à tous, Je suis nouveau sur le forum et sur la plateforme, pourriez-vous me dire com...
Nicolas Il faut simplement l'appliquer sur le prix.
sir_i Merci pour la réponse, je ne suis pas familier avec l'application de cette procédure simple,...
Nicolas Il s'agit d'un indicateur compatible avec PRT v11 uniquement. Pour éviter les erreurs de cop...
Sébi Intéressant. Merci pour ce partage Nicolas. L'indicateur ne considère pas les divergences ...
Nicolas ok, pour les divergences chacun voit midi à sa porte je dirai :) Vu qu'il n'y a pas de formu...
Vinks_o_7 Great, thanks a lot Nicolas !
Teddy Coronak Top Nicolas ! Merci
Andyswede Thank's! Great indicator:)
mcha merci bien et félicitations pour la réactivité avec laquelle il a été mis dans la bibliothèq...
soulintact Great indicator Nicolas, thanks!
cdc.andersson Hello, when trying to include this wonderful Dynamic RSI on my trading system i get the erro...
Rafyone Bonjour Nicolas et bonne année lol J'ai une erreur qui apparait concernant drawbarchart une...
Nicolas Je pense que tu n'utilises pas le bon éditeur de code, cette instruction est compatible uniq...
Exalaxe Hey, i just noticed you optimized this strategy. Could i see your new version, please?
Andrea.1981 sorry i add my code but it not enter why i dont know
Andrea.1981 this is code simply stop , and you can see another version for stop / Codice principale...
AntoGH how did you backtest it ?
PastaPesto @AntoGH , I dont know if you are asking me, but my backtest was made in an IS of 4 years bet...
Ridder @PastaPesto Do you still running this and how is the results? Thanks
dau710 Are the Bulls Blue & the Bears Red?
dau710 Many thanks :)
myhlo Super Nicolas !! Cet indicateur offre une nouvelle lecture du Rsi ! Ces bandes up & Dawn...
okiki please how can i acess the indicator i like it and want it please am new here
Nicolas download the itf file above and import it into your prorealtime platform: https://www.prorea...
XXXXVII Excellent indicateur ! Déterminer une tendance est devenu un jeu d'enfants ! Félicitation......
gregoire bonjour nicolas j ai cherché partout sur le net et impossible de trouvé ce que je recherch...
Nicolas Merci de poster une demande dans le forum des indicateurs, ainsi on pourra le coder dans ce ...
bala Hi Nicolas, I have been extensively researching for lot of answers here. I found that you...
Nicolas Don't apply it on price, use the main "indicator and trading system" button found on the top...
Bogdan35 Hello, Is there one for MT4?

Top