Triple RAFF Channel projection (On Price)

Triple Raff Channel linear projection indicator for PRT.

Premise

PRT implementation of the “Bianca” trends visualization of 3 linear regressions. This indicator adopts the Raff channel algorithm and outputs 3 sets of support and resistance lines on the same chart. These sets represent:

Primary trend (blue)
Secondary trend (green)
Tertiary trend (red)

Interpretation:

If all three sets of trend-lines align, a strong sentiment is established. This could be bullish, bearish or consolidating.

If tertiary trend and/or secondary trend are diverging from primary trend, or diverging from each other, a breakout of the wider trend is more probable.

If you are not familiar with this concept and associated trading systems, read up on raf channels and/or bianca trends.
http://stockcharts.com/school/doku.php?id=chart_school:chart_analysis:raff_regression_chan

Variables

Defaults are 50 bars (primary); 20 (secondary); 10 (tertiary). These can be changed by you.

Developer Information

The mid lines are not plotted but they are available of course. If you would like to view them or adapt further then use reg
Support and resistance lines are averaged from raff and riff lines. If you want to see both, replace averaging code (source code is commented)

Enjoy!

Maz

— code —

// Triple RAF Channel (Bianca) indicator for PRT
// Written by "Maz" at prorealcode.com
// Adopted from RAFF algorithm
// --

for i = 1 to 3

// Blue (Long term)
if i = 1 then
k   = blue
det = DPO[k*2](close)
if det=det[1] and det[1]=det[2] and det[2]<>det[3] then
flag = 1
endif
n      = (k*2)-4
p      = (n/2)-1
d100   = DPO[n](close)
moy100 = close-d100
co     = (moy100-moy100[1]+(close[p])/n)*n
h100   = dpo[n](high)
moyh   = high-h100
hi     = (moyh-moyh[1]+(high[p])/n)*n
l100   = dpo[n](low)
moyl   = low-l100
lo     = (moyl-moyl[1]+(low[p])/n)*n
if flag=1 and flag[1]=0 then
somx  = 0
somy  = 0
somxx = 0
somxy = 0
for i=1 to k
somx = somx+i
next
for i=0 to k-1
somy=somy+co[i]
next
for i=1 to k
somxx=somxx+(i*i)
next
for i=0 to k-1
somxy=somxy+(co[i]*(k-i))
next
a = (k*somxy-somx*somy)/(k*somxx-somx*somx)
b = (somy-a*somx)/k
for i=0 to k-1
ecah = hi[i]-a*(k-i)-b
maxh = max(maxh,ecah)
ecal = a*(k-i)+b-lo[i]
maxl = max(maxl,ecal)
next
endif
if flag=0 then
reg = undefined
else
j = j + 1
reg = a * j + b
endif

raffBlue  = max(maxh,maxl)
rafflBlue = reg-raffBlue
raffhBlue = reg+raffBlue

riffBlue  = min(maxh,maxl)
riffhBlue = reg+riffBlue
rifflBlue = reg-riffBlue

// (optional) - let's take an average of the riff and raff
BlueResistance = (raffhBlue + riffhBlue) / 2
BlueSupport    = (rafflBlue + rifflBlue) / 2


elsif i = 2 then // Green (Medium term)
k = green
Gdet = DPO[k*2](close)
if Gdet = Gdet[1] and Gdet[1] = Gdet[2] and Gdet[2] <> Gdet[3] then
Gflag = 1
endif
Gn      = (k*2)-4
Gp      = (Gn/2)-1
Gd100   = DPO[Gn](close)
Gmoy100 = close-Gd100
Gco     = (Gmoy100 - Gmoy100[1]+(close[Gp])/Gn)*Gn
Gh100   = dpo[Gn](high)
Gmoyh   = high-Gh100
Ghi     = (Gmoyh - Gmoyh[1]+(high[Gp])/Gn)*Gn
Gl100   = dpo[Gn](low)
Gmoyl   = low-Gl100
Glo     = (Gmoyl-Gmoyl[1]+(low[Gp])/Gn)*Gn
if Gflag = 1 and Gflag[1] = 0 then
Gsomx  = 0
Gsomy  = 0
Gsomxx = 0
Gsomxy = 0
for i = 1 to k
Gsomx = Gsomx+i
next
for i = 0 to k-1
Gsomy=Gsomy+Gco[i]
next
for i = 1 to k
Gsomxx=Gsomxx+(i*i)
next
for i = 0 to k-1
Gsomxy=Gsomxy+(Gco[i]*(k-i))
next
Ga = (k*Gsomxy-Gsomx*Gsomy)/(k*Gsomxx-Gsomx*Gsomx)
Gb = (Gsomy-Ga*Gsomx)/k
for i=0 to k-1
Gecah = Ghi[i]-Ga*(k-i)-Gb
Gmaxh = max(Gmaxh,Gecah)
Gecal = Ga*(k-i)+Gb-Glo[i]
Gmaxl = max(Gmaxl,Gecal)
next
endif
if Gflag = 0 then
Greg = undefined
else
Gj = Gj + 1
Greg = Ga * Gj + Gb
endif

raffGreen  = max(Gmaxh,Gmaxl)
rafflGreen = Greg-raffGreen
raffhGreen = Greg+raffGreen

riffGreen  = min(Gmaxh,Gmaxl)
riffhGreen = Greg+riffGreen
rifflGreen = Greg-riffGreen

// (optional) - let's take an average of the riff and raff
GreenResistance = (raffhGreen + riffhGreen) / 2
GreenSupport    = (rafflGreen + rifflGreen) / 2

elsif i = 3 then // Red (Short Term)
k = red
Rdet = DPO[k*2](close)
if Rdet = Rdet[1] and Rdet[1] = Rdet[2] and Rdet[2] <> Rdet[3] then
Rflag = 1
endif
Rn      = (k*2)-4
Rp      = (Rn/2)-1
Rd100   = DPO[Rn](close)
Rmoy100 = close-Rd100
Rco     = (Rmoy100 - Rmoy100[1]+(close[Rp])/Rn)*Rn
Rh100   = dpo[Rn](high)
Rmoyh   = high-Rh100
Rhi     = (Rmoyh - Rmoyh[1]+(high[Rp])/Rn)*Rn
Rl100   = dpo[Rn](low)
Rmoyl   = low-Rl100
Rlo     = (Rmoyl-Rmoyl[1]+(low[Rp])/Rn)*Rn
if Rflag = 1 and Rflag[1] = 0 then
Rsomx  = 0
Rsomy  = 0
Rsomxx = 0
Rsomxy = 0
for i = 1 to k
Rsomx = Rsomx+i
next
for i = 0 to k-1
Rsomy=Rsomy+Rco[i]
next
for i = 1 to k
Rsomxx=Rsomxx+(i*i)
next
for i = 0 to k-1
Rsomxy=Rsomxy+(Rco[i]*(k-i))
next
Ra = (k*Rsomxy-Rsomx*Rsomy)/(k*Rsomxx-Rsomx*Rsomx)
Rb = (Rsomy-Ra*Rsomx)/k
for i=0 to k-1
Recah = Rhi[i]-Ra*(k-i)-Rb
Rmaxh = max(Rmaxh,Recah)
Recal = Ra*(k-i)+Rb-Rlo[i]
Rmaxl = max(Rmaxl,Recal)
next
endif
if Rflag = 0 then
Rreg = undefined
else
Rj = Rj + 1
Rreg = Ra * Rj + Rb
endif

raffRed  = max(Rmaxh,Rmaxl)
rafflRed = Rreg-raffRed
raffhRed = Rreg+raffRed

riffRed  = min(Rmaxh,Rmaxl)
riffhRed = Rreg+riffRed
rifflRed = Rreg-riffRed

// (optional) - let's take an average of the riff and raff
RedResistance = (raffhRed + riffhRed) / 2
RedSupport    = (rafflRed + rifflRed) / 2
endif

next


return BlueSupport coloured (10, 10, 200) as "Blue Support", BlueResistance coloured (10, 10, 255) as "Blue Resistance" , GreenSupport coloured (10, 200, 10) as "Green Support", GreenResistance coloured (10, 255, 10) as "Green Resistance", RedSupport coloured (200, 10, 10) as "Red Support", RedResistance coloured (255, 10, 10) as "Red Resistance"

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

190

191

192

193

194

195

196

197

198

199

200

201

// Triple RAF Channel (Bianca) indicator for PRT

// Written by "Maz" at prorealcode.com

// Adopted from RAFF algorithm

// --

for i = 1 to 3

// Blue (Long term)

if i = 1 then

k = blue

det = DPO[k*2](close)

if det=det[1] and det[1]=det[2] and det[2]<>det[3] then

flag = 1

endif

n = (k*2)-4

p = (n/2)-1

d100 = DPO[n](close)

moy100 = close-d100

co = (moy100-moy100[1]+(close[p])/n)*n

h100 = dpo[n](high)

moyh = high-h100

hi = (moyh-moyh[1]+(high[p])/n)*n

l100 = dpo[n](low)

moyl = low-l100

lo = (moyl-moyl[1]+(low[p])/n)*n

if flag=1 and flag[1]=0 then

somx = 0

somy = 0

somxx = 0

somxy = 0

for i=1 to k

somx = somx+i

for i=0 to k-1

somy=somy+co[i]

for i=1 to k

somxx=somxx+(i*i)

for i=0 to k-1

somxy=somxy+(co[i]*(k-i))

a = (k*somxy-somx*somy)/(k*somxx-somx*somx)

b = (somy-a*somx)/k

for i=0 to k-1

ecah = hi[i]-a*(k-i)-b

maxh = max(maxh,ecah)

ecal = a*(k-i)+b-lo[i]

maxl = max(maxl,ecal)

endif

if flag=0 then

reg = undefined

else

j = j + 1

reg = a * j + b

endif

raffBlue = max(maxh,maxl)

rafflBlue = reg-raffBlue

raffhBlue = reg+raffBlue

riffBlue = min(maxh,maxl)

riffhBlue = reg+riffBlue

rifflBlue = reg-riffBlue

// (optional) - let's take an average of the riff and raff

BlueResistance = (raffhBlue + riffhBlue) / 2

BlueSupport = (rafflBlue + rifflBlue) / 2

elsif i = 2 then // Green (Medium term)

k = green

Gdet = DPO[k*2](close)

if Gdet = Gdet[1] and Gdet[1] = Gdet[2] and Gdet[2] <> Gdet[3] then

Gflag = 1

endif

Gn = (k*2)-4

Gp = (Gn/2)-1

Gd100 = DPO[Gn](close)

Gmoy100 = close-Gd100

Gco = (Gmoy100 - Gmoy100[1]+(close[Gp])/Gn)*Gn

Gh100 = dpo[Gn](high)

Gmoyh = high-Gh100

Ghi = (Gmoyh - Gmoyh[1]+(high[Gp])/Gn)*Gn

Gl100 = dpo[Gn](low)

Gmoyl = low-Gl100

Glo = (Gmoyl-Gmoyl[1]+(low[Gp])/Gn)*Gn

if Gflag = 1 and Gflag[1] = 0 then

Gsomx = 0

Gsomy = 0

Gsomxx = 0

Gsomxy = 0

for i = 1 to k

Gsomx = Gsomx+i

for i = 0 to k-1

Gsomy=Gsomy+Gco[i]

for i = 1 to k

Gsomxx=Gsomxx+(i*i)

for i = 0 to k-1

Gsomxy=Gsomxy+(Gco[i]*(k-i))

Ga = (k*Gsomxy-Gsomx*Gsomy)/(k*Gsomxx-Gsomx*Gsomx)

Gb = (Gsomy-Ga*Gsomx)/k

for i=0 to k-1

Gecah = Ghi[i]-Ga*(k-i)-Gb

Gmaxh = max(Gmaxh,Gecah)

Gecal = Ga*(k-i)+Gb-Glo[i]

Gmaxl = max(Gmaxl,Gecal)

endif

if Gflag = 0 then

Greg = undefined

else

Gj = Gj + 1

Greg = Ga * Gj + Gb

endif

raffGreen = max(Gmaxh,Gmaxl)

rafflGreen = Greg-raffGreen

raffhGreen = Greg+raffGreen

riffGreen = min(Gmaxh,Gmaxl)

riffhGreen = Greg+riffGreen

rifflGreen = Greg-riffGreen

// (optional) - let's take an average of the riff and raff

GreenResistance = (raffhGreen + riffhGreen) / 2

GreenSupport = (rafflGreen + rifflGreen) / 2

elsif i = 3 then // Red (Short Term)

k = red

Rdet = DPO[k*2](close)

if Rdet = Rdet[1] and Rdet[1] = Rdet[2] and Rdet[2] <> Rdet[3] then

Rflag = 1

endif

Rn = (k*2)-4

Rp = (Rn/2)-1

Rd100 = DPO[Rn](close)

Rmoy100 = close-Rd100

Rco = (Rmoy100 - Rmoy100[1]+(close[Rp])/Rn)*Rn

Rh100 = dpo[Rn](high)

Rmoyh = high-Rh100

Rhi = (Rmoyh - Rmoyh[1]+(high[Rp])/Rn)*Rn

Rl100 = dpo[Rn](low)

Rmoyl = low-Rl100

Rlo = (Rmoyl-Rmoyl[1]+(low[Rp])/Rn)*Rn

if Rflag = 1 and Rflag[1] = 0 then

Rsomx = 0

Rsomy = 0

Rsomxx = 0

Rsomxy = 0

for i = 1 to k

Rsomx = Rsomx+i

for i = 0 to k-1

Rsomy=Rsomy+Rco[i]

for i = 1 to k

Rsomxx=Rsomxx+(i*i)

for i = 0 to k-1

Rsomxy=Rsomxy+(Rco[i]*(k-i))

Ra = (k*Rsomxy-Rsomx*Rsomy)/(k*Rsomxx-Rsomx*Rsomx)

Rb = (Rsomy-Ra*Rsomx)/k

for i=0 to k-1

Recah = Rhi[i]-Ra*(k-i)-Rb

Rmaxh = max(Rmaxh,Recah)

Recal = Ra*(k-i)+Rb-Rlo[i]

Rmaxl = max(Rmaxl,Recal)

endif

if Rflag = 0 then

Rreg = undefined

else

Rj = Rj + 1

Rreg = Ra * Rj + Rb

endif

raffRed = max(Rmaxh,Rmaxl)

rafflRed = Rreg-raffRed

raffhRed = Rreg+raffRed

riffRed = min(Rmaxh,Rmaxl)

riffhRed = Rreg+riffRed

rifflRed = Rreg-riffRed

// (optional) - let's take an average of the riff and raff

RedResistance = (raffhRed + riffhRed) / 2

RedSupport = (rafflRed + rifflRed) / 2

endif

return BlueSupport coloured (10, 10, 200) as "Blue Support", BlueResistance coloured (10, 10, 255) as "Blue Resistance" , GreenSupport coloured (10, 200, 10) as "Green Support", GreenResistance coloured (10, 255, 10) as "Green Resistance", RedSupport coloured (200, 10, 10) as "Red Support", RedResistance coloured (255, 10, 10) as "Red Resistance"

raff raff channel trend trend following trendlines

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


larouedegann • 02/10/2017 #
blue = 50
green = 20
red = 10
than you

shephinc • 02/10/2017 #
Is there an easy way get a value returned from the indicator that says if the blue channel is heading up or down ?

alf • 02/10/2017 #
Hello,
How can i project it on the chart?
Now it is below amongst the other indicators..
Thankss:)

lebrinque • 02/10/2017 #
This is AWESOME!

Thank you Maz!!
- Maz • 02/10/2017 #
  You’re welcome, thanks

lebrinque • 02/10/2017 #
Does anyone know how to make the lines extended? Like having an option for right and left?

Maz • 02/10/2017 #
With PRT it’s not currently possible to extend lines into the future (right) via the scripting language

Kris75 • 02/10/2017 #
Hi Maz,
How could we translate this in a strategy?

Kris75 • 02/10/2017 #
fantastic job btw

ggolfet • 02/10/2017 #
it seems it’s not working anymore with prorealtime 11, anyone has the same problem?

Moritz Müller • 02/10/2017 #
hi there,
I just checked and I does not work for me anymore neither – unfortunately. would be great if somebody could point to the right direction how to adjust the code.
Would be great if the code could be adjusted to work as a screener as well – as shephinc mentioned.
thanks
- jums • 02/10/2017 #
  Hi,
  
  Can you make an update for PRT v11 ?
  
  Best Regards,

Lotech123 • 02/10/2017 #
PLEASE, PLEASE someone modify the code of this special indicator for V 11.
Thank you in keen anticipation
- Nicolas • 02/10/2017 #
  just use 3 times a linear regression channel code you will find in the library.

Maz • 02/10/2017 #
Hi all, firstly happy to know that this is helping you. I look into updating it for PRT11 when I get the chance. All the best

leederbyshire • 02/10/2017 #
Here’s the link to alternative linear regression channel indicator Nicolas is referring to that works on v12 since v10.3 being discontinued if anyone struggling to find it.
https://www.prorealcode.com/prorealtime-indicators/standard-deviation-standard-error-linear-regression-channel/

CavalierDeCesDames Bonjour Nicolas, Thanks for your use full job. I tried this indicator on a shorter timefram...

Nicolas You are welcome. I'm glad you like it.

Bolbo It does not appear over the price indicator on V11. Thanks in advance.

bearbull As per PhilipSchultz question above, has anybody managed to add code for when it turns blue,...

Ybr35 Bonjour Nicolas, lorsque je lance l'indicateur, il m'est indiqué que je dois définir les var...

Nicolas L'idéal est de télécharger le fichier itf joint sur cette page et de l'importer dans la plat...

Nicolas Merci dans ce cas d'ouvrir un sujet dans le forum ProScreener svp.

Andrea Hi Nicolas, thx for your code. Please i need your help to understand this part of your code:...

Nicolas the MA200 is ascending since 20 periods.

Regan2020 Hi, has anybody update the above code to enable on a 15m or 5m TF?

gigi64 ik heb de code op mijn pro realtime gezet , en bij indicator staat hij erbij maar komt niet ...

gigi64 I have put the code on my pro realtime, and it is on the indicator, but it does not appear o...

supertiti Thanks you so much Lucassen

dreif123 hi, copied the above code, not working on 10.3 the system says "return can only be used at ...

LUCASSEN Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, tha...

Krallenmann Hallo Nicolas, kannst du mir die Regeln für den Halftrend Indikator sagen? Aus dem Code kann...

davefransman Dear Nicolas, i want set a alert on the "HalfTrend "custom moving average" met Heikin Ashi w...

Nicolas Please post the question in a new forum topic, that would need custom coding I believe.

Lyam Pareil ne marche pas dommage

ahmedbouaziz89 Bonjour, quand j'ajoute le code ou le fichier dans l'outils screeners de Prorealtime je ne v...

tyvix Bonjour le code marche bien c est juste qu'il n y a pas d opportunité au moment ou vous le...

verdi55 Is there such a thing as a free lunch ?

maceng Thanks Nicolas for this great work! I would like to understand the math behind it in order t...

Nicolas Sorry I have no time to provide assistance for python programmers. Have a good day.

Wing Yes, investigate as much as you want. For more insight, you can view the linet1, linet2 etc....

CKW Hi Wing, Thanks for your sharing. I am still trying to breakdown & understand your code...

Wing Hello CKW. No, the parameter, 7 in this case, is used when calling the RSI indicator to ide...

Nicolas Je vais faire l'indicateur et expliquer comment en même temps dans un sujet de forum. Plus s...

gregus merci nicolas toute ma gratitude est pour toi sa sera bien pratique car je pense ne pas etre...

Nicolas Ok merci donc d'ouvrir un sujet spécifique pour cette demande donc :)

algotrader This indicator looks coolBut on attempt to use it for a strategy dev'I get an error.."The in...

dajvop @algotrader if you at the bottom of the code add: RETURN Buffer1 as "up", Buffer2 as "down",...

Bateson Si cela peut servir, l'indicateur Sadukey a été créé en utilisant un générateur de filtre ap...

Nicolas Thanks for contributing to the "ichimoku section" of the prorealtime code library Don't he...

sourberry Thank you , this is a great indicator works beautifully. Could you kindly modify to scr...

pp_playaflamenca Excuse me,... reading your code about spanB: [ SenkouSpanBFutureW = (Highest[SenkouSpanPerio...

Arnaud HALVICK Great indicator, thank you!

JMat45 Hi Nicolas, just reviewing this indicator and noticed that you have double assigned the vari...

Nicolas That would not make any difference because the code is read from top to bottom.

Mansoor What does COI stand for?

MikeGC Hi Mansoor, COI is the abbreviation for the Coppock indicator.

nonetheless Anyone interested in this strategy please see forum topic: https://www.prorealcode.com/topic...

MikeGC I don't know if you have used the variables a and b to optimise the parameters for the Super...

gianpiero75 I have not optimized, I multiplied the parameters for 6 (5,8), to use them on the 4 hoursTF...

bertrandpinoy bonjour Mike j utilise TrendChaser V2.0 et quand il prend position cela ne programme pas le ...

zilliq The reasons why I think it's time consuming and we loose time to try to do backests and Auto...

filiprb Hello Zilliq, You don't need a system to produce a walk forward test. You can easily create...

Philip Raphael It is incredible! Thanks for sharing, Doctrading!

eisi If i switch between different Markets, the Backgroundcolour will appear where it should not...

datageek How can I get alerts on colour change?

NAMBO40 Hello, I would like to add a 25 period SMA moving average. It's possible?

Yannick Thanks for sharing. This strategy is flat for 11 years and winning afterwards. Don't you thi...

Doctrading Hello, As I usually say, strategies are exposed to be improved :) So yes, I think there mu...

Fabio Anthony Terrenzio this strategy works only in a well defined trend

brosly Good afternoon I am trying to get the complete code of lex strategy made by adolfo since I s...

dreif123 hi Adolfo, is Alex Auto Trading Botindex working on DAX as well ? if so , can you post the...

Triple Raff Channel linear projection indicator for PRT.

Share this

Likes