Halftrend MACD

Here i have made a kind of MACD indicator from the halftrend indicator from the Great NICOLAS, after the improvement from him , I want to shared with everybody.

The histogram is made from the difference of 2 HalfTrend indicator (one long and one short period), then a signal line, built with an average of 6 periods of the histogram values is added.

Trades signals are the same than a normal MACD: long position when the histogram is crossing the zero line, short order when the histogram cross the zero level. The signal line can act the same, any crosses made with the histogram could result as an new order on market:

short signal when the signal line cross above the histogram and above the zero level
long signal when the signal line cross below the histogram and below the zero level

//PRC_HalfTrend MACD | indicator
//10.03.2017
//by LUCASSEN adapted code from 
//Nicolas @ www.prorealcode.com
//Sharing ProRealTime knowledge

//Amplitude1 = 2
//Amplitude2 = 6
//Amplitude3 = 30

// -- HL #1
lowpricei1 = Lowest[Amplitude1](low)
highpricei1 = Highest[Amplitude1](high)
lowma1 = average[Amplitude1](low)
highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then
trend1=1.0
nexttrend1=0
minhighprice1=highpricei1
endif

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then
trend1=0.0
nexttrend1=1
maxlowprice1=lowpricei1
endif

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then
up1=down1[1]
else
up1=Max(maxlowprice1,up1[1])
endif
down1=0.0

else

if(trend1[1]<>1.0) then
down1=up1[1]
else
down1=Min(minhighprice1,down1[1])
endif
up1=0.0
endif

endif





// -- HL #2
lowpricei2 = Lowest[Amplitude2](low)
highpricei2 = Highest[Amplitude2](high)
lowma2 = average[Amplitude2](low)
highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then
trend2=1.0
nexttrend2=0
minhighprice2=highpricei2
endif

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then
trend2=0.0
nexttrend2=1
maxlowprice2=lowpricei2
endif

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then
up2=down2[1]
else
up2=Max(maxlowprice2,up2[1])
endif
down2=0.0

else

if(trend2[1]<>1.0) then
down2=up2[1]
else
down2=Min(minhighprice2,down2[1])
endif
up2=0.0
endif

endif

if up2>0 then
halftrend2 = up2

else
halftrend2 = down2

endif

// -- HL #3
lowpricei3 = Lowest[Amplitude3](low)
highpricei3 = Highest[Amplitude3](high)
lowma3 = average[Amplitude3](low)
highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then
trend3=1.0
nexttrend3=0
minhighprice3=highpricei3
endif

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then
trend3=0.0
nexttrend3=1
maxlowprice3=lowpricei3
endif

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then
up3=down3[1]
else
up3=Max(maxlowprice3,up3[1])
endif
down3=0.0

else

if(trend3[1]<>1.0) then
down3=up3[1]
else
down3=Min(minhighprice3,down3[1])
endif
up3=0.0
endif

endif

if up3>0 then
halftrend3 = up3
else
halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

179

180

181

182

183

184

185

186

187

188

189

//PRC_HalfTrend MACD | indicator

//10.03.2017

//by LUCASSEN adapted code from

//Nicolas @ www.prorealcode.com

//Sharing ProRealTime knowledge

//Amplitude1 = 2

//Amplitude2 = 6

//Amplitude3 = 30

// -- HL #1

lowpricei1 = Lowest[Amplitude1](low)

highpricei1 = Highest[Amplitude1](high)

lowma1 = average[Amplitude1](low)

highma1 = average[Amplitude1](high)

if barindex>Amplitude1 then

if(nexttrend1=1) then

maxlowprice1=Max(lowpricei1,maxlowprice1)

if(highma1<maxlowprice1 and Close<Low[1]) then

trend1=1.0

nexttrend1=0

minhighprice1=highpricei1

endif

if(nexttrend1=0) then

minhighprice1=Min(highpricei1,minhighprice1)

if(lowma1>minhighprice1 and Close>High[1]) then

trend1=0.0

nexttrend1=1

maxlowprice1=lowpricei1

endif

if(trend1=0.0) then

if(trend1[1]<>0.0) then

up1=down1[1]

else

up1=Max(maxlowprice1,up1[1])

endif

down1=0.0

else

if(trend1[1]<>1.0) then

down1=up1[1]

else

down1=Min(minhighprice1,down1[1])

endif

up1=0.0

endif

// -- HL #2

lowpricei2 = Lowest[Amplitude2](low)

highpricei2 = Highest[Amplitude2](high)

lowma2 = average[Amplitude2](low)

highma2= average[Amplitude2](high)

if barindex>Amplitude2 then

if(nexttrend2=1) then

maxlowprice2=Max(lowpricei2,maxlowprice2)

if(highma2<maxlowprice2 and Close<Low[1]) then

trend2=1.0

nexttrend2=0

minhighprice2=highpricei2

endif

if(nexttrend2=0) then

minhighprice2=Min(highpricei2,minhighprice2)

if(lowma2>minhighprice2 and Close>High[1]) then

trend2=0.0

nexttrend2=1

maxlowprice2=lowpricei2

endif

if(trend2=0.0) then

if(trend2[1]<>0.0) then

up2=down2[1]

else

up2=Max(maxlowprice2,up2[1])

endif

down2=0.0

else

if(trend2[1]<>1.0) then

down2=up2[1]

else

down2=Min(minhighprice2,down2[1])

endif

up2=0.0

endif

if up2>0 then

halftrend2 = up2

else

halftrend2 = down2

endif

// -- HL #3

lowpricei3 = Lowest[Amplitude3](low)

highpricei3 = Highest[Amplitude3](high)

lowma3 = average[Amplitude3](low)

highma3= average[Amplitude3](high)

if barindex>Amplitude3 then

if(nexttrend3=1) then

maxlowprice3=Max(lowpricei3,maxlowprice3)

if(highma3<maxlowprice3 and Close<Low[1]) then

trend3=1.0

nexttrend3=0

minhighprice3=highpricei3

endif

if(nexttrend3=0) then

minhighprice3=Min(highpricei3,minhighprice3)

if(lowma3>minhighprice3 and Close>High[1]) then

trend3=0.0

nexttrend3=1

maxlowprice3=lowpricei3

endif

if(trend3=0.0) then

if(trend3[1]<>0.0) then

up3=down3[1]

else

up3=Max(maxlowprice3,up3[1])

endif

down3=0.0

else

if(trend3[1]<>1.0) then

down3=up3[1]

else

down3=Min(minhighprice3,down3[1])

endif

up3=0.0

endif

if up3>0 then

halftrend3 = up3

else

halftrend3 = down3

endif

return (halftrend2 - halftrend3),average[6] (halftrend2 - halftrend3)

MACD trend trend following

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


supertiti • 04/06/2017 #
amplitude 1.2.3 = ( 2-6-30 ) or (1-1-27) ?

LUCASSEN • 04/06/2017 #
Hallo Supertiti
Macd amplitude=1-1-27 and prc halftrend triple in Heikin Ashi grafiek amplitude =2-6-10
greetings Lucassen

supertiti • 04/06/2017 #
Thanks you so much Lucassen

dreif123 • 04/06/2017 #
hi, copied the above code, not working on 10.3
the system says “return can only be used at proBuilder….what do i have todo ?

LUCASSEN • 04/06/2017 #
Hallo , i have no problem , and i have the same versie 10.3, maybe you can ask Nicolas, that men nows a lot over indicators.
greetings Lucassen

Pensera Bonjour Nicolas, comment est-il possible de backtester cet indicateur? cela fait une erreu...

Nicolas Oui bien sûr, il doit y avoir pas mal de sujets dans le forum à ce propos.

simmerseb Bonjour, merci beaucoup pour cet indicateur je le trouve très clair et pertinent.

Manu L. Bonjour Nicolas, j'ai créé un screener avec l'aide à la prog en TF weekly mais je voudrai...

wtangsiri C'est exactement le même signal que donne le croisement et le décroisement de deux EMA (7 et...

PHAN100 bonjour, j'ai un bug sur le programme recopié prorealtime me dit qu'il y a un problème à ...

Pensera Bravo Nicolas ! Tu es en quelque sorte l’inventeur de Metascore…(oups je viens de lire jusqu...

Nicolas Dans un but d'investissement pure, et non spéculatif.

Enigma08 Hi Juanj. I am new to ProrealTime and I am trying to program the Proscreener. I want the Pro...

IV Mcm Vous devez faire un clic droit sur le prix > propriété > ajouter indicateur Si vous...

punch1 Fonctionne pas chez moi il s'affiche rien pourtant j'ai bien fait le clic droit sur le prix ...

punch1 Je peux te faire un screen d'ecran si tu as un email :)

Nicolas Il doit s'agir d'un mauvais copier/coller. Je suggère de télécharger le fichier itf contenu ...

Bard Hello @Nicolas, I can get this to display in a separate indicator panel but not on Price as ...

Stenozar Hi @Nicolas, how can I put the bands on price? Thanks, Stefano

oraclus Bonjour indicateur très intéressant existe t il un screener qui détecte les actions qui donn...

IV Mcm Ce n'est pas le but de cet indicateur, mais avec un peu d'entraînement vous pourriez le code...

Yantra Thank you for sharing your good work!

Nicolas le code est déjà sur cette page, inutile de fournir un autre format ?! Les fichiers itf sont...

Novice-Surfer Hello IV Mcm, You are my leader ! Your work is incredibly precise, thank you very much f...

Mikolajek Merci pour votre excellent travail !

mickey992 salut merci pour ton partage et ton travaille

patapouf Hi Vivien René I just discovered your “Ordered trend-following stocks Screener”. Great work...

MONEY38 j'aime bien merci pour votre partage

Nicolas Oui c'est possible. Merci de ne pas poster des demandes qui sont hors sujets. Pour les deman...

Igor Merci pour cet itf. Question : comment faire pour instruire un screener ?

Nicolas tester le croisement du Close avec la première valeur de l'indicateur : "TrailingStop", faci...

Dunstan I would like to get guidance_ How do I access and attach this indicator to my MT5 platform...

Nicolas You can't, use prorealtime, it's way better

jc84 Thank you very much for this indicator , not provided by PRT I was actually working at thi...

Nicolas Oui le code est correct et il fonctionne, j'ai de bons résultats sur la liste NASDAQ par exe...

pincherman Bonjour :-) J'ai coller le script dans prorealtime pour jouer avec le supertrend et j'ai un...

Nicolas Vous l'avez sans doute collé au mauvais endroit, dans l'éditeur de code pour les stratégies,...

IV Mcm Bonjour, Je ne reconnais pas cette ligne dans le code, essayer de télécharger directement le...

Manu L. Bonjour, Possible de créer un screnner multiframe Mois dans Ichimoku semaine dans Ichimok...

Manu L. ?

Guillaume Mcm I gave the above message fix ;)

Tradingrob Is it possible to put the itf-file in the right way here in Prorealcode? so the right 'trend...

Guillaume Mcm Update link ;) https://www.prorealcode.com/topic/trend-histogramme-cci-mise-a-jour-suite-...

Share this

Likes