Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

v11
Scatter Plot Analysis of RSI, Stochastic, Williams%R and ADX

This indicator can analyse the four indicators RSI, Stochastic, Williams%R and ADX and present the results in a scatter chart.

This indicator only works on PRTv11 onwards.

Each of these bounded indicators returns a result between zero and 100. Every candles returned value is calculated rounded up and then a win rate and profit and loss calculated on where price was ‘BarsAfter’ candles later and stored for that returned indicator value. The results are further separated into results for if our tested candle was a red candle or a green candle. The results are then displayed in a scatter chart and also as text to the left of the scatter chart. Sample size is also calculated and displayed so that we can see how big a sample the results are calculated on.

So for example on the DJI daily if we check the RSI indicator and base our calculations on 2 bars after we can see that if the RSI returned a value of 35 (actually >34 and <=35) then we had 192 candles in our history with an RSI value of 35 with 57 of them being green and 135 red. We can then also see the win rate for if we went long on green candles with RSI=35 and exited after two bars or short on green candles with RSI=35 and exited after two bars – and the same for long on red or short on red.

If we switch ‘ProfitLoss’ on then the scatter chart changes so we can see how much each trade direction would have won or lost. The scatter chart y axis is calculated to represent the most profitable indicator value return at 100% and the worst at 0%.

The x axis always represents the indicator returned values between zero and 100.

The indicator has two modes. ‘Live’ or not live. In Live mode the results and scatter plot display change to only show results for the current candle colour and current chosen indicator return value for the current candle. In ‘Not Live’ mode you can enter a ‘Value’ and check the results for any indicator returned value for any colour candle. In ‘Live’ mode the blue line represents the current candles indicator returned value location on the scatter chart and it will move up and down as this changes. The points at the top and bottom of the blue line change colour from red to green depending on current candle colour. In ‘Not Live’ mode the points of the line are blue and the blue line is located on whatever you have set ‘Value’ to be.

You can set a ‘Spread’ to be used in the profit and loss calculations. Spread is not taken into account when calculating the win rates however.

You can also set ‘DecimalPlaces’ to display more or less decimal places in the profit and loss displayed results.

Set ‘p’ to whatever period of your chosen indicator you want to analyse.

There are four tick boxes to choose an indicator. If no boxes are ticked then the default is RSI but if you tick more than one box then the order of display priority is ADX then Williams%R then Stochastic.

As always I advise downloading and importing to get full functionality.

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. Vinks_o_7 • 04/06/2020 #

    Vonasi you’re a beast !!! ;-)))

  2. pableitor • 04/06/2020 #

    Amazing indicator , you are pushing PRT to the limit! But looking at the scatter its not clear to me how can we interpret the plot , I mean should we look for some kind of linear correlation between x/y ?

avatar
Register or

Likes

avatar avatar avatar avatar avatar
Related users ' posts
Sapo Thank you very much. as always your indicators are extremely effective. kind regards Vonasi.
mitsu21 Hi, it looks nice. I'll try it tomorrow thank you for your share kind regards bruno
kj1988 Thank you Vonasi for sharing this indicator. Very useful as a comfirmation to the price act...
Vinks_o_7 Thanks again Vonasi !
Bard Thank you, this is a great tool @Vonasi, especially for those that used to like shorting Ind...
Aragorna Hi Vonasi, is there a reason why it does not work anymore in new version ePRT Platform? tha...
sycomore Ça ne fonctionne sur aucune valeur, je dois être trop con...
Nicolas il faut appliquer l'indicateur sur le prix.
AntoGH Je crains de ne pas comprendre... Cela indique la probabilité de la prochaine bougie ou donn...
michaelben Bonjour Nicolas . Je cherche une strategie pour faire du trading automatisé. J'ai essaye ave...
JJ Tec Hola. Me gustaría contactar contigo para ver la estrategia..
nilsla1981 Has someone already tested in real ?
Lucas0000 Hola. estoy buscando un programador en proorder, para hacer un programa basado en el Q-trend...
ggolfet Thanks Nicolas, I imported the itf file and solved the problem.
Hasardeur Hallo Nicolas, i tried to code the multi period heat map in combination with the Ehler’s ...
Nicolas Please open a new topic with the code in forum.
Marie-Eve Vergoz lorsque je copie les codes, le système me signale des erreurs à la ligne 12 et suivantes
Marie-Eve Vergoz sorry - tout est ok -
AlgoAlex
5 years ago
Marcot18 Alex ti sei superato
AlexF Esagerato!
jobswaps Sube como trazar lineas de tendencias a tantas barras
Frankiesc interesting indicator !! Thanks for sharing!!!
robertogozzi Thank you :)
Vinks_o_7
5 years ago
IV Mcm I've always wondered how to make the ADX faster, thank you!
Vinks_o_7 You welcome !
Vinks_o_7 Another variation that may be more accurate : we calculate the average of normalized DI's in...
JJ Tec Hola Las condiciones de entrada / salida vienen en el libro de J. Carter Mastering the trad...
Pixeldd Ich bekomme beim einfügen des Indikators einen Fehler angezeigt. Was bitte muss ich genau än...
HarryPro Hello, Firtly there appears to be a typo on line 6 "lenghkc=20" should this be "lengthkc=...
Nicolas En effet merci, erreur corrigée, la variable Risk affecte désormais comme il se doit les cal...
nader003 How can we get this indicator on MT4
Nicolas You can ask for private custom coding to our programming services: https://www.prorealcode.c...
sir_i Bonjour à tous, Je suis nouveau sur le forum et sur la plateforme, pourriez-vous me dire com...
Nicolas Il faut simplement l'appliquer sur le prix.
sir_i Merci pour la réponse, je ne suis pas familier avec l'application de cette procédure simple,...
Nicolas Il s'agit d'un indicateur compatible avec PRT v11 uniquement. Pour éviter les erreurs de cop...
Sébi Intéressant. Merci pour ce partage Nicolas. L'indicateur ne considère pas les divergences ...
Nicolas ok, pour les divergences chacun voit midi à sa porte je dirai :) Vu qu'il n'y a pas de formu...
Vinks_o_7 Great, thanks a lot Nicolas !
Teddy Coronak Top Nicolas ! Merci
Andyswede Thank's! Great indicator:)
mcha merci bien et félicitations pour la réactivité avec laquelle il a été mis dans la bibliothèq...
soulintact Great indicator Nicolas, thanks!
cdc.andersson Hello, when trying to include this wonderful Dynamic RSI on my trading system i get the erro...
Rafyone Bonjour Nicolas et bonne année lol J'ai une erreur qui apparait concernant drawbarchart une...
Nicolas Je pense que tu n'utilises pas le bon éditeur de code, cette instruction est compatible uniq...
Exalaxe Hey, i just noticed you optimized this strategy. Could i see your new version, please?
Andrea.1981 sorry i add my code but it not enter why i dont know
Andrea.1981 this is code simply stop , and you can see another version for stop / Codice principale...
AntoGH how did you backtest it ?
PastaPesto @AntoGH , I dont know if you are asking me, but my backtest was made in an IS of 4 years bet...
Ridder @PastaPesto Do you still running this and how is the results? Thanks
dau710 Are the Bulls Blue & the Bears Red?
dau710 Many thanks :)

Top