HighLow Adaptive Momentum Cycle

HighLow Adaptive Momentum Cycle

Here is a new oscillator made of a cycle calculation of the median price calculated from the highest high and lowest low of the last x periods.

An adaptive period formula can be activated to calculate the “best” period of the hi/lo channel because of market noises.

I added 4 different returned buffers to identify when the oscillator is increasing or declining above of below the 0 level which represent the bull/bear side of the market.

 

 

 

Share this

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments : How to import ITF files into ProRealTime platform?

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials

  1. winnie37 • 08/28/2016 #

    bonsoir Nicolas,
    je réagis tardivement à cet indicateur 🙂 Ne serait-il pas particulièrement adapté dans le cadre de stratégies binaires, dans le sens de la tendance? A tester….

    • Nicolas • 08/28/2016 #

      Comme un nombre incalculable d’autres indicateurs codés deci delà, je compte sur d’autres pour les tester et en profiter. Si j’ai eu l’idée de faire cet indicateur à l’époque et de le poster ici, c’est qu’il m’a semblé assez signicatif pour être utilisé. Si tu as des exemples de sa bonne utilisation selon ta propre interprétation,  ça m’intéresse d’en discuter 🙂  

  2. NeraVeem • 08/28/2016 #

    Dear Nicolas,
    First of all, thank you for all your contributions, I always study them with great pleasure. I assume you are the creator of the prc-fxhilo indicator. As an indicator, this indicator is easy to invoke in other indicators. However, in the screening section this does not seem to be the case. Neither as a call function nor in case you use the code directly in a screen builder. Do I miss something or simply can not? Like to hear from you. Sincerely, Gerard

    • Nicolas • 08/28/2016 #

      It should not be a problem to use it in a stock screener, what is the problem exactly? Be aware that there are 4 different buffers, 2 for ascending and declining above 0 and the 2 others for when the oscillator is below 0.

    • NeraVeem • 08/28/2016 #

      Dear Nicolas, 
      thnx for your reply! In your answer you said: ‘It should not be a problem to use it in a stock screener’. I am afraid that the problem my ‘use direction’ is. In other words: I tried to use the indicator in a forex screener. The second possibility cause of the problem is maybe that I only use the minustwo and the plustwo lines. The other signals are ‘ignored’. Should that possible the problem? Kind regards, Gerard

    • Nicolas • 08/28/2016 #

      What condition are you trying to look for? When the oscillator is crossing the zero line?

  3. NeraVeem • 08/28/2016 #

    Dear Nicolas,
    ‘Reading’ the ‘output’ of the indicator, it seems to me that there are no ‘crossings’.  The plustwo finshed at the zero line in case of bearing direction, the minustwo also in case of bullish direction. That’s why I thought to create a screener where the one (for example: minustwo finished at zero line and the plustwo ‘take it over’. That simulates for me a ‘crossing’. Because in my opinion thre are no real crossings, I thought I would solve it by ‘greater than’ (in bullish case) or ‘less than’  ( in bearish case) operators. The remaining variables I thought would turn off with the ‘REM’ command or use the ‘ignored’ construction. De with the ‘Ignored’ command  fails and the option with the ‘REM’ gives no results in the screener.
    Please, see script below. 
    Adaptive = 1myPeriod = 14
    once f = 0once g = 0
    if barindex>myPeriod then
    //adaptive periodaveragePeriod = myPeriodif adaptive=1 and averagePeriod > 1 thenprice = medianpriceminPeriod = round(averagePeriod/2.0)maxPeriod = minPeriod*5.0endPeriod = round(maxPeriod)signal = Abs((price-stored[endPeriod]))noise = 0.00000000001
    for k=1 to endPeriod donoise=noise+Abs(price-stored[k])averagePeriod = round(((signal/noise)*(maxPeriod-minPeriod))+minPeriod)next
    endifstored=priceaverageperiod=max(averageperiod,2)myHigh = Highest[abs(averagePeriod)](high)myLow = Lowest[abs(averagePeriod)](Low)mean = (High + Low) / 2.0myVAR1 = 0.66 * ((mean – myLow) / (myHigh – myLow) – 0.5) + 0.67 * fmyVAR1 = Min(Max(myVAR1, -0.999), 0.999)fxhilo = Log((myVAR1 + 1.0) / (1 – myVAR1)) / 2.0 + g / 2.0 //main linef = myVAR1g = fxhiloif fxhilo>fxhilo[1] and fxhilo>0 thenREM plusone = fxhiloREM plustwo = 0REM minusone = 0minustwo = 0elsif fxhilo<fxhilo[1] and fxhilo>0 thenREM plusone = 0REM plustwo = fxhiloREM minusone = 0minustwo = 0elsif fxhilo>fxhilo[1] and fxhilo<0 thenREM plusone = 0REM plustwo = 0REM minusone = fxhilominustwo =0elsif fxhilo<fxhilo[1] and fxhilo<0 then REM plusone = 0REM plustwo = 0REM minusone = 0minustwo = fxhiloendifendif
    // Bullish Sign
    If MinusTwo < minusTwo[1] OR MinusTwo[1] < minusTwo[2]ThenCriteria = 110EndIf
    Screener [Criteria] (Criteria AS “MinusLow”)
    I’ve tried to upload a sceenprint as example, but that was refused by this text editor.
    So far my problem.
    Kind regards,
    Gerard

    • Nicolas • 08/28/2016 #

      Sorry, it has needed a lot more customisation of the indicator’s code to get a relevant screener. This code should work (worked for me on a daily timeframe for NASDAQ stocks for instance)
      // parameters
      myPeriod = 21
      Adaptive = 1 //boolean

      once f = 0
      once g = 0

      //adaptive period
      averagePeriod = myPeriod
      if adaptive=1 and averagePeriod > 1 then
      price = medianprice
      minPeriod = round(averagePeriod/2.0)
      maxPeriod = minPeriod*5.0
      endPeriod = round(maxPeriod)
      signal = Abs((price-stored[endPeriod]))
      noise = 0.00000000001
      mymaxbar = 254-maxPeriod
      endif

      if barindex>mymaxbar then

      if adaptive=1 and averagePeriod > 1 then
      for k=1 to endPeriod do
      noise=noise+Abs(price-stored[k])
      averagePeriod = round(((signal/noise)*(maxPeriod-minPeriod))+minPeriod)
      next

      endif
      stored=price
      averageperiod=max(averageperiod,2)
      myHigh = Highest[abs(averagePeriod)](high)
      myLow = Lowest[abs(averagePeriod)](Low)
      mean = (High + Low) / 2.0
      myVAR1 = 0.66 * ((mean - myLow) / (myHigh - myLow) - 0.5) + 0.67 * f
      myVAR1 = Min(Max(myVAR1, -0.999), 0.999)
      fxhilo = Log((myVAR1 + 1.0) / (1 - myVAR1)) / 2.0 + g / 2.0 //main line
      f = myVAR1
      g = fxhilo

      endif

      condition = g crosses over 0 or g crosses under 0

      screener[condition]
       

  4. NeraVeem • 08/28/2016 #

    Dear Nicolas,
    thnx a lot of your screener script. A quick test teaches that it works, also for Forex trading in smaller timeframes. Again, thnx !!!
     
    Gerard

  5. Vinks_o_7 • 08/28/2016 #

    hello
    Pour info, j’ai une erreur sur la version actuelle de PRT: un paramètre de type entier positif est attendu pour highest…

    • Nicolas • 08/28/2016 #

      As-tu bien enlevé les // devant les paramètres “myPeriod” et “Adaptive” ?

    • carlvan • 08/28/2016 #

      J’ai la même erreur. Pourtant ABS donne par définition un nombre positif

    • Nicolas • 08/28/2016 #

      Essayons de remplacer la ligne 27 par:
      averageperiod=max(round(averageperiod),2)

  6. Traste • 08/28/2016 #

    Hi!! this is a great indicador, which I regularly use on PRT. However, I’d love to have it on TradingView too, is there any chance it can be converted? Thanks!

    • Nicolas • 08/28/2016 #

      We don’t provide TV assistance on our website, to get private paid coding translation use the programming services: https://www.prorealcode.com/trading-programming-services/

    • Suzu Yuk • 08/28/2016 #

      Hello, I am still getting the same error even after removing the // in front of the “myPeriod” and “Adaptive” parameters….. Why?

avatar
Register or

Likes

avatar avatar avatar avatar avatar avatar avatar avatar avatar avatar
Related users ' posts
lolo
10 years ago
TD REI
TD REI
0
Indicators
lolo
10 years ago
ZIGZAG TREND
ZIGZAG TREND
4
Indicators
Vonasi I'm interested in this indicator but it does not appear to work on 10.3. Could it be possibl...
Nicolas You need to change the 'amnt' variable to a percentage, so if you set it to 10 it represents...
Vonasi Thanks for your reply - I had tried that - I set the amnt to 1 on a 15 min GBPUSD chart and ...
lolo
10 years ago
Demarker
Demarker
0
Indicators
lolo
10 years ago
Schaff Trend Cycle
Schaff Trend Cycle
3
Indicators
Fabio Anthony Terrenzio what are the two orizzontal line?
ggolfet The results I get from this indicator seem different from the results obtained using the ind...
Nicolas An accurate indicator (identical to the platform one) for Schaff Trend Cycle is now also ava...
lolo
10 years ago
lolo
10 years ago
lolo
10 years ago
BuilderRVI
BuilderRVI
0
Indicators
Nicolas
10 years ago
Guibourse HI, I wonder how to change the mid line color depending on its growing or declining evolutio...
Brent38 Bonjour à tous, Post tardif, mais on débute tous un jour, et moi je découvre Prorealcode. ...
Nicolas Oui en effet, le TDI c'est un RSI lissé avec des écarts types sur sa moyenne.
Nicolas
10 years ago
Tradesun Salve, ho provato ad inserire l'indicatore nella piattaforma ma mi chiede di definire la var...
maximus78 Tradesun, se scarichi il file ITF allegato e lo importi nella piattaforma ci sono già le var...
Nicolas
10 years ago
Klinger oscillator
Klinger oscillator
4
Indicators
Nicolas Because they are external variables and not present in the code. Please download the itf fil...
fykemang Whenever I attempt to apply this to a chart, the value is 0, not sure what is wrong.
Nicolas The Klinger Oscillator needs Volume in order to be calculated. Apply it on an instrument tha...
Nicolas
10 years ago
Nicolas Just replace the last line with this : RETURN dm as "Volume Weighted MACD", masignal as "Si...
thomas2004ch I happen to read this article. I would say the formel 'd = maslow - mafast' could be inverse...
Nicolas You are right! but still the picture is looking good. The formula is inverted! dunno why :) ...
Nicolas
10 years ago
petmut Hello all, When I import the code here above "multiple ATR bands" and apply it on the PRT ...
Nicolas That should need some custom coding, if you want to make it done, please open a new topic in...
Patopercho Hello, thanks for the indicator, i would like to change the color, is it possible, thanks
Nicolas
10 years ago
patrick3 Merci Nicolas pour cet indicateur, il est très utile pour voir les vagues
Vicari0us Really liking this indicator. Thanks
SB-FO Moving your last response to this post. Thanks for conforming the code below. How does PRT/...
Nicolas It is obtained by substracting the x days before Close from today’s Close. X is the paramete...
Nicolas
10 years ago
Pivot oscillator
Pivot oscillator
3
Indicators
supertiti // PIVOT OSCILLO onchart PRC DID Pivot Oscillator - ProRealCode - prorealtime prog...
supertiti https://hubic.com/home/pub/?ruid=aHR0cHM6Ly9sYjEuaHViaWMub3ZoLm5ldC92MS9BVVRIXzFiNjRhYmY3ZjA...
supertiti http://ovh.to/rbcdfr2

Top