New alarms (the “bell”)

Robb · 2023-08-07T20:04:51+00:00

Hi, As far as I understood, this command (the bell icon I mean) can be set by considering only the close value of a bar. So the alarm is triggered by the final close value, regardless the low. Of course I use pin bar and the bar low is actually the level to be considered by the alarm itself but unfortunately it doesn’t work. Could you please let me know if this is correct or not. Thanks Bye Roberto

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
08/07/2023 at 9:04 PM #218697 quote

Robb
Participant

Average

Hi,

As far as I understood, this command (the bell icon I mean) can be set by considering only the close value of a bar.

So the alarm is triggered by the final close value, regardless the low.

Of course I use pin bar and the bar low is actually the level to be considered by the alarm itself but unfortunately it doesn’t work.

Could you please let me know if this is correct or not.

Thanks

Bye

Roberto

08/08/2023 at 7:23 AM #218707 quote

Nicolas
Keymaster

Legend

No, you can actually set alarms for conditions in a forming bar.

Set trigger during “real time”.

real-time-alert.png

08/08/2023 at 9:29 PM #218747 quote

Robb
Participant

Average

Hello Nicolas

The alarm goes off comparing the trigger level only with close value. It does not work with other data bar.

I set real time in the alarm window.

I use end of day software version.

08/09/2023 at 11:55 AM #218812 quote

Nicolas
Keymaster

Legend

Robb wrote:

I use end of day software version.

I think that’s the reason.
Author

Posts