Screener temporarily not available

• 12/09/2019 at 9:34 AM #114468
  ligand

  Hello, why do I get the following error trying to run the attached screener program:

  screener temporarily not available (Screener ist zur Zeit nicht verfügbar)

  (it was available yesterday, but only for a short time and only for weekly intervals)? Thanks very much for helping.

  retest of the neck line of a double bottom after a sharp drop

  // long: Doppelboden nach tiefem Fall, dann Retest der Nackenlinie von oben mit grüner Kerze. 8,20,15 Kerzen von jetzt zurück für die 3massgeblichen Intervalle //Doppelboden definieren y1= high[8] for a = 8 to 18 y1 = max(high[a],y1) next y2= high[19] for b = 19 to 43 y2 = max(high[b],y2) next indicator2=abs(y2-y1)<0.5*AverageTrueRange[14](close) //zwei richtige Bäuche des Doppelbodens y3=high[44] for c=44 to 50 y3=max(high[c],y3) next indicator6=y3<y2 //Erholung nach tiefem Fall indicator1=(highest[150]-lowest[150])>2.5*(y1-lowest[150]) //Aktuelle Kerze grün und berührt (fast) Nackenlinie indicator3=close>(y1 and y2) and close>open indicator4= abs(low-y2)<0.5*AverageTrueRange[14](close) //Ausbruch nach oben hatte schon stattgefunden indicator5=lowest[close[4]]>(y1 or y2) c1= (indicator1 AND indicator2 AND indicator3 and indicator4 and indicator5 and indicator6) filter=c1 SCREENER [filter](volume)

  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34

  // long: Doppelboden nach tiefem Fall, dann Retest der Nackenlinie von oben mit grüner Kerze. 8,20,15 Kerzen von jetzt zurück für die 3massgeblichen Intervalle   //Doppelboden definieren y1= high[8] for a = 8 to 18 y1 = max(high[a],y1) next y2= high[19] for b = 19 to 43 y2 = max(high[b],y2) next   indicator2=abs(y2-y1)<0.5*AverageTrueRange[14](close)   //zwei richtige Bäuche des Doppelbodens y3=high[44] for c=44 to 50 y3=max(high[c],y3) next indicator6=y3<y2   //Erholung nach tiefem Fall indicator1=(highest[150]-lowest[150])>2.5*(y1-lowest[150])   //Aktuelle Kerze grün und berührt (fast) Nackenlinie indicator3=close>(y1 and y2) and close>open indicator4= abs(low-y2)<0.5*AverageTrueRange[14](close)   //Ausbruch nach oben hatte schon stattgefunden indicator5=lowest[close[4]]>(y1 or y2)   c1= (indicator1 AND indicator2 AND indicator3 and indicator4 and indicator5 and indicator6) filter=c1 SCREENER [filter](volume)

   

  

  ligand

  Participant

  Topics: 3

  Replies: 27

  Been thanked: 1 time
  12/09/2019 at 10:10 AM #114474
  Vonasi

  Post moved from the ‘suggestions for ProrealTime’ topic. Please try to post in the correct place with future questions.

  

  Vonasi

  Moderator

  Topics: 192

  Replies: 5088

  Been thanked: 1812 times
  12/09/2019 at 11:24 AM #114484
  GraHal

  Screener doesn’t work for me either!

  I’ve tried a few minor changes to the code, various Lists and Timeframes … still no go!

  1 user thanked author for this post.

  ligand

  

  GraHal

  Participant

  Topics: 221

  Replies: 9097

  Been thanked: 2357 times
  12/09/2019 at 4:32 PM #114504
  ligand

  Prorealtime sent me an answer – THANKS- and now it works. It was a syntax error

  …you got to code:

  for example

  indicator4=close>y1 and close>y2 and close>open

  It doesn’t work with:

  indicator4=close> (y1 and y2) and  close>open

   

  Have a nice day!

  1 user thanked author for this post.

  GraHal

  

  ligand

  Participant

  Topics: 3

  Replies: 27

  Been thanked: 1 time
• Author
  Posts