Email Notification of predefined Condition

Viewing 9 posts - 16 through 24 (of 24 total)
1 2
  • Author
    Posts
  • 10/14/2019 at 7:50 AM #110088 quote
    solar
    Participant
    Senior
    fatlung wrote:

    So it means that the request is a mission impossible on PRT?

     

    fatlung wrote:

    what i am trying to achieve is to get an email notification each time when the volume exceeds a certain value ( e.g.20k) on the 1H TF.

    Is it possible on PRT?

    I am meaning this request.

    10/14/2019 at 8:37 AM #110089 quote
    GraHal
    Participant
    Master

    Yes you can do above, I set it up as Volume > 30 on the 1 min TF on DJI and I have had 4 emails so far …  in the last 4 mins! 🙂

    Understandably the Alert has to be set up on a Market where volume is available … for example NOT Forex.

    solar thanked this post
    10/14/2019 at 8:44 AM #110090 quote
    solar
    Participant
    Senior
    fatlung wrote:

    I found the email alert was triggered only once then become inactive. Is it possible to set a repeating alarm everytime the condition is met?

    I am encountering this problem, can u show me how did u do it @GraHal

    10/14/2019 at 9:11 AM #110093 quote
    GraHal
    Participant
    Master
    fatlung wrote:

    I found the email alert was triggered only once

    To use my Alert as an example … I only get Alerts / emails when volume dropped below 30 and then rose above 30 in the next 1 min bar,
    I do not (and you would not) get an Alert / Email for every bar that volume remains above 30 for the whole bar.

    I just reset my Alert to All Crossings so then at least I would know that volume had reduced to below 30. I got the attached message for All Crossings.

    Does that clarify how the Alert works @fatlung?

    PRT Support / Anybody?

    (It is confusing as it begs the question … how is > 30 different from crossing above 30 as the two settings work exactly the same??  Anybody can answer please?)

    I have thought of a possible reason for above … if volume > 30 produced an alert for every bar with vol > 30 then this would be confused with the repeating Alert sound on the Platform … only the time of execution of the Alert would identify  … a repeating Alert for a single meeting of the condition … from … a repeated meeting of the condition on successive bars.

    Lung.png Lung.png
    10/14/2019 at 9:21 AM #110094 quote
    solar
    Participant
    Senior

    In my case the alert is triggered immediately after the volume reaches x on 1H TF (not necessarily on bar close) and then the status on PRT remains ‘triggered’ and never resets on its own.

    10/14/2019 at 9:49 AM #110098 quote
    GraHal
    Participant
    Master
    fatlung wrote:

    status on PRT remains ‘triggered’ and never resets on its own.

    Please check if  it the Alert goes back to ‘waiting‘ when volume drops below x on 1H TF?

    10/14/2019 at 10:04 AM #110099 quote
    GraHal
    Participant
    Master

    I am checking on 1 min TF  and vol > 50 over 5 mins ago and the Alert still says ‘Triggered‘ even though vol has been < 50 for5 mins.

    I will leave it until vol > 50 for a second time to make sure I get another email then I will cancel the email part of the Alert to see if the Alert goes back to ‘Waiting‘ when vol goes back to  < 50.

    solar thanked this post
    10/14/2019 at 10:32 AM #110103 quote
    GraHal
    Participant
    Master

    Mmm Email alerts are inconsistent …

    With Email Alert Selected

    • Vol went to > 50 at 10:10 having been < 50 since 10:05 but I did not get an email at 10:10 (nor up to 10:30 at time of writing this).
      With email selected … display of Triggered / Waiting on the Alert monitor screen DOES NOT WORK / Change correctly  when it should..

     

    With Email Alert Deselected

    • Vol went to < 50 at 10:26 and the Alert screen went immediately / real time back to ‘Waiting’.
      With email deselected … display of Triggered / Waiting on the Alert monitor screen DOES WORK / change correctly  when it should..

     

    My conclusion … Email Alerts are inconsistent and cannot be relied on, sometimes they work, but often they don’t !?

    Roll on Version 11!? Believe it when I see it??

    10/14/2019 at 11:02 AM #110107 quote
    GraHal
    Participant
    Master

    Aha … I’ve found a work around … go to the Alert settings screen (after each email alert!) and click modify alert!  See red arrowhead on attached.

    With above work around then even with email alert selected you will get a fresh email alert once / each time your condition is met.

    Lung-2.png Lung-2.png lung-3.png lung-3.png
  • Author
    Posts
Viewing 9 posts - 16 through 24 (of 24 total)
1 2
  • You must be logged in to reply to this topic.

Email Notification of predefined Condition


Platform Support: Charts, Data & Broker Setup

New Reply
Author
author-avatar
solar @fatlung Participant
Summary

This topic contains 23 replies,
has 4 voices, and was last updated by GraHal
6 years, 4 months ago.

Topic Details
Forum: Platform Support: Charts, Data & Broker Setup
Language: English
Started: 10/09/2019
Status: Active
Attachments: 3 files
Logo Logo
Loading...
Do you like cookies? 🍪 We use cookies to ensure you get the best experience on our website. (Learn more)
©2026 ProRealCode - Trading & Coding with ProRealTime™