Select a range of bars

christofferR · 2020-09-04T11:06:06+00:00

Hi, I’ve searched in the forum and tried a bunch of different things but cant seem to get it right. Im looking for a way to set an intervall of say 10 – 20 bars and get the highest and lowest from that intervall, the last 0- 10 should not be taken in consideration. Best, Christoffer

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
09/04/2020 at 12:06 PM #143372 quote

christofferR
Participant

Average

Hi,

I’ve searched in the forum and tried a bunch of different things but cant seem to get it right.

Im looking for a way to set an intervall of say 10 – 20 bars and get the highest and lowest from that intervall, the last 0- 10 should not be taken in consideration.

Best,

Christoffer

09/04/2020 at 12:49 PM #143377 quote
robertogozzi
Moderator

Legend
There you go:
```
MyHigh = highest[10](high[11])
MyHigh = highest[10](high)[11]
```
that will scan bars 11,12,….20 (ten bars) starting from the 11th bar prior to the current one.

The returned values are the same for the two lines.

christofferR thanked this post
09/04/2020 at 2:18 PM #143392 quote

Vonasi
Moderator

Master

christofferR – Welcome to the forums…. however please re-read the few simple forum rules and make sure that you post in the correct forum with any future topics. I have moved your post to the ProBuilder forum as that is the place for indicator topics.

christofferR thanked this post
Author

Posts