Optimiser – Gains turn to Zeros

Viewing 6 posts - 1 through 6 (of 6 total)

Author

Posts
08/26/2023 at 1:19 PM #219808 quote

GraHal
Participant

Master

This happened to me earlier this week / last weekend and, as I’m a bit ill, I thought I was losing it! 😉

The Optimiser works and shows £3,645 Gain between 40% and about 80% complete, then loads of zero’s start filling the Gain column and at 100% complete my Gain is 0. Nothing but zeros show in the Gain column.

I do have the Gain column set to sort highest to lowest.

Anybody else experiencing this or ever experienced it or any comments?

08/26/2023 at 4:28 PM #219813 quote

GraHal
Participant

Master

Doesn’t always end up at zeros in the Gain column as I just had one that was showing circa +£24K and eneded up at circa +£3k.

You wouldn’t notice it unless you watch continuously and even then maybe only if optimising over 10K bars (as 100K bars might be too slow to notice?).

Well weird problem, maybe a weekend thing while maintenance going on??

08/27/2023 at 10:16 AM #219833 quote

GraHal
Participant

Master

Success … the weirdness was due to not disabling Money Management while optimising.

I don’t recall this specific weird behaviour mentioned previously on here?

robertogozzi thanked this post

08/27/2023 at 12:20 PM #219849 quote

GraHal
Participant

Master

The plot thickens 🙂 …

If MM = 1 and I optimise 2 variables I don’t get the weird behaviour detailed above.

If MM = 1 and I optimise 3 variables I do get the weird behaviour detailed above.

08/27/2023 at 12:39 PM #219850 quote

GraHal
Participant

Master

Even above is not consistent!

I am down to optimising 1 variable only at times. This with MM = 1.

Be interesting to see what the Live results are after optimising with MM = 1.

09/12/2023 at 10:54 AM #220850 quote

RafaelN
Moderator

Senior

Hi,

Do not hesitate to send a technical report to ProRealTime if needed.

Have a nice day,

Raf
Author

Posts