Bonjour à tous, je vous joint une technique qui m’a fait du 100% depuis le 02/06/21 mais je voudrais avoir l’avis d’expert pour améliorer les gains (vous pouvez retirer également la condition c3 mais un peu de perte prévu) Programmé de 09h00 à 11h00 sur eur/usd technique simple mais qui semble correcte. Merci à nicolas et robberto au passage j’ai utilisé votre programme de breakeven. Alors si quelq’un pourrais se pencher dessus pour esseyer de l’améliorer et qu’il partage ses connaissances. bonne fête à tous. // Définition des paramètres du code DEFPARAM CumulateOrders = False DEFPARAM PRELOADBARS = 2000 // Empêche le système de placer des ordres pour entrer sur le marché ou augmenter la taille d'une position avant l'heure spécifiée noEntryBeforeTime = 090000 timeEnterBefore = time >= noEntryBeforeTime // Empêche le système de placer des ordres pour entrer sur le marché ou augmenter la taille d'une position après l'heure spécifiée noEntryAfterTime = 110000 timeEnterAfter = time < noEntryAfterTime // Empêche le système de placer de nouveaux ordres sur les jours de la semaine spécifiés daysForbiddenEntry = OpenDayOfWeek = 6 OR OpenDayOfWeek = 0 // Conditions pour ouvrir une position en vente à découvert indicator1 = SenkouSpanB[9,26,52] c1 = (close CROSSES UNDER indicator1) indicator2 = SenkouSpanA[9,26,52] c2 = (close CROSSES UNDER indicator2) indicator3 = ExponentialAverage[300](close) c3 = (close > indicator3) IF (c1 AND c2 and c3) AND timeEnterBefore AND timeEnterAfter AND not daysForbiddenEntry and tally < maxTrades THEN sellshort 1 CONTRACT AT MArket partial=0 endif // sortie partielle if shortonmarket and positionperf>0.10/100 and partial=0 then exitshort 0.5 contract at market partial = 1 endif once maxTrades = 10 //maxNumberDailyTrades once tally = 0 if intradayBarIndex = 0 then tally = 0 endif newTrades = (onMarket and not onMarket[1]) or ((not onMarket and not onMarket[1]) and (strategyProfit <> strategyProfit[1])) or (longOnMarket and ShortOnMarket[1]) or (longOnMarket[1] and shortOnMarket) or ((tradeIndex(1) = tradeIndex(2)) and (barIndex = tradeIndex(1)) and (barIndex > 0) and (strategyProfit = strategyProfit[1])) if newTrades then tally = tally +1 endif //------------------------------------------------------------------------------------------------------------------------ //--------------------------------------------------------------------------------------------------------------- //Max-Orders per Day once maxOrdersL = 1 //long once maxOrdersS = 1 //short if intradayBarIndex = 0 then //reset orders count ordersCountL = 0 ordersCountS = 0 endif if longTriggered then //check if an order has opened in the current bar ordersCountL = ordersCountL + 1 endif if shortTriggered then //check if an order has opened in the current bar ordersCountS = ordersCountS + 1 endif //------------------------------------------------------------------------------------------------------------------------ // Stops et objectifs set stop %loss 0.58 set target %profit 0.195 IF Not OnMarket THEN // // when NOT OnMarket reset values to default values // TrailStart = 2.45 //30 Start trailing profits from this 1.74 BasePerCent = 0.000 //20.0% Profit percentage to keep when setting BerakEven StepSize = 1 //10 Pip chunks to increase Percentage PerCentInc = 0.000 //10.0% PerCent increment after each StepSize chunk BarNumber = 10 //10 Add further % so that trades don't keep running too long BarPerCent = 0.235 //10% Add this additional percentage every BarNumber bars RoundTO = -0.5 //-0.5 rounds always to Lower integer, +0.4 rounds always to Higher integer, 0 defaults PRT behaviour PriceDistance = 9 * pipsize //7 minimun distance from current price y1 = 0 //reset to 0 y2 = 0 //reset to 0 ProfitPerCent = BasePerCent //reset to desired default value TradeBar = BarIndex ELSIF LongOnMarket AND close > (TradePrice + (y1 * pipsize)) THEN //LONG positions // // compute the value of the Percentage of profits, if any, to lock in for LONG trades // x1 = (close - tradeprice) / pipsize //convert price to pips IF x1 >= TrailStart THEN // go ahead only if N+ pips Diff1 = abs(TrailStart - x1) //difference from current profit and TrailStart Chunks1 = max(0,round((Diff1 / StepSize) + RoundTO)) //number of STEPSIZE chunks ProfitPerCent = BasePerCent + (BasePerCent * (Chunks1 * PerCentInc)) //compute new size of ProfitPerCent // compute number of bars elapsed and add an additionl percentage // (this percentage is different from PerCentInc, since it's a direct percentage, not a Percentage of BasePerCent) // (if BasePerCent is 20% and this is 10%, the whole percentage will be 30%, not 22%) BarCount = BarIndex - TradeBar IF BarCount MOD BarNumber = 0 THEN ProfitPerCent = ProfitPerCent + BarPerCent ENDIF // ProfitPerCent = max(ProfitPerCent[1],min(100,ProfitPerCent)) //make sure ProfitPerCent doess not exceed 100% y1 = max(x1 * ProfitPerCent, y1) //y1 = % of max profit ENDIF ELSIF ShortOnMarket AND close < (TradePrice - (y2 * pipsize)) THEN //SHORT positions // // compute the value of the Percentage of profits, if any, to lock in for SHORT trades // x2 = (tradeprice - close) / pipsize //convert price to pips IF x2 >= TrailStart THEN // go ahead only if N+ pips Diff2 = abs(TrailStart - x2) //difference from current profit and TrailStart Chunks2 = max(0,round((Diff2 / StepSize) + RoundTO)) //number of STEPSIZE chunks ProfitPerCent = BasePerCent + (BasePerCent * (Chunks2 * PerCentInc)) //compute new size of ProfitPerCent // compute number of bars elapsed and add an additionl percentage // (this percentage is different from PerCentInc, since it's a direct percentage, not a Percentage of BasePerCent) // (if BasePerCent is 20% and this is 10%, the whole percentage will be 30%, not 22%) BarCount = BarIndex - TradeBar IF BarCount MOD BarNumber = 0 THEN ProfitPerCent = ProfitPerCent + BarPerCent ENDIF // ProfitPerCent = max(ProfitPerCent[1],min(100,ProfitPerCent)) //make sure ProfitPerCent doess not exceed 100% y2 = max(x2 * ProfitPerCent, y2) //y2 = % of max profit ENDIF ENDIF IF y1 THEN //Place pending STOP order when y1 > 0 (LONG positions) SellPrice = Tradeprice + (y1 * pipsize) //convert pips to price // // check the minimun distance between ExitPrice and current price // IF abs(close - SellPrice) > PriceDistance THEN // // place either a LIMIT or STOP pending order according to current price positioning // IF close >= SellPrice THEN SELL AT SellPrice STOP ELSE SELL AT SellPrice LIMIT ENDIF ELSE // //sell AT MARKET when EXITPRICE does not meet the broker's minimun distance from current price // SELL AT Market ENDIF ENDIF IF y2 THEN //Place pending STOP order when y2 > 0 (SHORT positions) ExitPrice = Tradeprice - (y2 * pipsize) //convert pips to price // // check the minimun distance between ExitPrice and current price // IF abs(close - ExitPrice) > PriceDistance THEN // // place either a LIMIT or STOP pending order according to current price positioning // IF close <= ExitPrice THEN EXITSHORT AT ExitPrice STOP ELSE EXITSHORT AT ExitPrice LIMIT ENDIF ELSE // //ExitShort AT MARKET when EXITPRICE does not meet the broker's minimun distance from current price // EXITSHORT AT Market ENDIF ENDIF
.
.
