Duda sobre volumen.

Forums ProRealTime foro Español Soporte ProBuilder Duda sobre volumen.

This topic contains 3 replies, has 2 voices, and was last updated by avatar ESSMIGOL 10 months ago.

View all attachments
Viewing 4 posts - 1 through 4 (of 4 total)
  • #53700

    Buenas a todos !!!!!.

    Lo primero saludar a toda la gente del foro…..y segundo quería haceros una pregunta, yo  opero en base al precio y al volumen y quería saber si en Prorealtime se puede poner el volumen en la misma ventana que el precio?. Me han dado el código del indicador del volumen. Pero me pide variables y al no saber de código me pierdo…..

    Si me podéis ayudar ….os lo agradecería. Pongo el código.

    Better Volume – ProRealTime/ChartNet/CMC – Version Dec. 2009 – Dutchy

     

    // Better Volume Indicator
    // Original idea by emini-watch.com
    // Source : http://emini-watch.com/free-stuff/volume-indicator/ AND http://emini-watch.com/category/volume-indicator/

    // Rewrite for ProRealTime / ChartNet / CMC by Dutchy, march 2009
    // Code is provided as public domain, no warranty.
    // You can find Dutchy on following fora
    // http://www.aktienboard.com/forum/f29/prorealtime-cmc-script-programmierung-t94783/
    // http://www.pro-at.com/forums-bourse/sujet-Forums-Partenaires-Forum-ProRealTime-92.html
    // Peace

    // Better Volume Indicator – Summary
    // ClimaxUp (Red) : Top, Start Up Trend, Down Trend Continue
    // ClimaxDown (White): Bottom, Up Trend Continue, Start Down Trend
    // LowVolume (Yellow): Bottom, Top, Up Trend Continue
    // Churn (Green): Bottom, Top, Down Trend Continue
    // ClimaxChurn (Magenta): Top, Down Trend Continue

    // Parameter: History = Boolean
    // Parameter: Use2Bars = Boolean
    // Parameter: Lookback = 20

    ONCE Condition1 = 0
    ONCE Condition2 = 0
    ONCE Condition3 = 0
    ONCE Condition4 = 0
    ONCE Condition5 = 0
    ONCE Condition6 = 0
    ONCE Condition7 = 0
    ONCE Condition8 = 0
    ONCE Condition9 = 0
    ONCE Condition10 = 0
    ONCE Condition11 = 0
    ONCE Condition12 = 0
    ONCE Condition13 = 0
    ONCE Condition14 = 0
    ONCE Condition15 = 0
    ONCE Condition16 = 0
    ONCE Condition17 = 0
    ONCE Condition18 = 0
    ONCE Condition19 = 0
    ONCE Condition20 = 0

    VolValue = Volume
    LowVolValue = VolValue
    ClimaxUpValue = VolValue
    ClimaxDownValue = VolValue
    ChurnValue = VolValue
    ClimaxChurnValue = VolValue
    StopVolValue = VolValue
    TrampolineValue = VolValue
    AVVolume = Average[Lookback*2](VolValue)

    IF History = 0 THEN
        BI = 400
    ELSIF History = 1 THEN
        BI = Lookback
    ENDIF

    IF BARINDEX > BI AND Volume <> 0 THEN
           
        IF Close > Open THEN
            Value1 = Volume * (Range / (2 * Range + Open – Close))
        ELSIF Close < Open THEN
            Value1= Volume * ((Range + Close – Open) / (2 * Range + Close – Open))
        ENDIF
        IF Close = Open THEN
            Value1 = 0.5 * Volume
        ENDIF
        Value2 = Volume  – Value1
       
        Value3 = Value1 + Value2
        Value4 = Value1 * Range
        Value5 = (Value1 – Value2) * Range
        Value6 = Value2 * Range
        Value7 = (Value2 – Value1) * Range
        IF Range <> 0 THEN
            Value8 = Value1 / Range
            Value9 = (Value1 – Value2) / Range
            Value10 = Value2 / Range
            Value11 = (Value2 – Value1) / Range
            Value12 = Value3 / Range
        ENDIF
       
        Value13 = Value3 +Value3[1]
        Value14 = (Value1+Value1[1]) * (Highest[2](High) – Lowest[2](Low))
        Value15 = (Value1+Value1[1] – Value2 – Value2[1]) * (Highest[2](High) – Lowest[2](Low))
        Value16 = (Value2 + Value2[1]) * (Highest[2](High) – Lowest[2](Low))
        Value17 = (Value2 + Value2[1] – Value1 – Value1[1]) * (Highest[2](High) – Lowest[2](Low))
        IF Highest[2](High) <> Lowest[2](Low) THEN
            Value18 = (Value1 + Value1[1]) / (Highest[2](High) – Lowest[2](Low))
        ENDIF
        Value19 = (Value1 + Value1[1] – Value2 – Value2[1]) / (Highest[2](High) – Lowest[2](Low))
        Value20 = (Value2 + Value2[1]) / (Highest[2](High) – Lowest[2](Low))
        Value21 = (Value2 + Value2[1] – Value1 – Value1[1]) / (Highest[2](High) – Lowest[2](Low))
        Value22 = Value13 / (Highest[2](High) – Lowest[2](Low))
       
        IF Use2Bars = 0 THEN
            Condition1 = Value3 = Lowest[Lookback](Value3)
            Condition2 = Value4 = Highest[Lookback](Value4) AND Close > Open
            Condition3 = Value5 = Highest[Lookback](Value5) AND Close > Open
            Condition4 = Value6 = Highest[Lookback](Value6) AND Close < Open
            Condition5 = Value7 = Highest[Lookback](Value7) AND Close < Open
            Condition6 = Value8 = Lowest[Lookback](Value8) AND Close < Open
            Condition7 = Value9 = Lowest[Lookback](Value9) AND Close < Open
            Condition8 = Value10 = Lowest[Lookback](Value10) AND Close > Open
            Condition9 = Value11 = Lowest[Lookback](Value11) AND Close > Open
            Condition10 = Value12 = Highest[Lookback](Value12)
        ELSIF Use2Bars = 1 THEN
            Condition11 = Value13 = Lowest[Lookback](Value13)
            Condition12 = Value14 = Highest[Lookback](Value14) AND Close > Open AND Close[1] > Open[1]
            Condition13 = Value15 = Highest[Lookback](Value15) AND Close > Open AND Close[1] > Open[1]
            Condition14 = Value16 = Highest[Lookback](Value16) AND Close < Open AND Close[1] < Open[1]
            Condition15 = Value17 = Highest[Lookback](Value17) AND Close < Open AND Close[1] < Open[1]
            Condition16 = Value18 = Lowest[Lookback](Value18) AND Close < Open AND Close[1] < Open[1]
            Condition17 = Value19 = Lowest[Lookback](Value19) AND Close < Open AND Close[1] < Open[1]
            Condition18 = Value20 = Lowest[Lookback](Value20) AND Close > Open AND Close[1] > Open[1]
            Condition19 = Value21 = Lowest[Lookback](Value21) AND Close > Open AND Close[1] > Open[1]
            Condition20 = Value22 = Highest[Lookback](Value22)
        ENDIF
       
        // *********************************************************************************************
       
        IF (Condition1 or Condition11) THEN    // Yellow
            LowVol = LowVolValue
        ELSE
            LowVol = 0
        ENDIF
       
        IF (Condition2 or Condition3 or Condition8 or Condition9 or Condition12 or Condition13 or Condition18 or Condition19) THEN        // Red
            ClimaxUp = ClimaxUpValue
            IF LowVol <> 0 THEN
                ClimaxUp = ClimaxUpValue / 2
            ENDIF
        ELSE
            ClimaxUp = 0
        ENDIF
       
        IF (Condition4 or Condition5 or Condition6 or Condition7 or Condition14 or Condition15 or Condition16 or Condition17) THEN        // White
            ClimaxDown = ClimaxDownValue
            IF LowVol <> 0 OR ClimaxUp <> 0 THEN
                ClimaxDown = ClimaxDownValue
            ENDIF
        ELSE
            ClimaxDown = 0
        ENDIF
       
        IF (Condition10 or Condition20) THEN    // Green
            Churn = ChurnValue
            IF LowVol <> 0 OR ClimaxUp <> 0 OR ClimaxDown <> 0 THEN
                Churn = ChurnValue / 2
            ENDIF
        ELSE
            Churn = 0
        ENDIF
       
        //IF (Condition10 or Condition20) AND (Condition2 or Condition3 or Condition4 or Condition5 or Condition6 or Condition7 or Condition8 or Condition9 or Condition12 or Condition13 or Condition14 or Condition15 or Condition16 or Condition17 or Condition18 or Condition19) THEN
        IF Churn <> 0 AND (ClimaxUp <> 0 OR ClimaxDown <> 0) THEN        // Magenta
            ClimaxChurn = ClimaxChurnValue
        ELSE
            ClimaxChurn = 0
        ENDIF
       
        //StopVolume
        LocalClosingPosition = 1 – (High – Close) / (High – Low)
        IF Volume > Volume[1] AND Range < Range[1] AND ((High > High[1] AND LocalClosingPosition < 0.4) OR (Low < Low[1] AND LocalClosingPosition > 0.6)) THEN
            StopVol = StopVolValue    * 1 / 3     // HigherVolume & LowerRange @ HigherHigh or LowerLow – DBlue
        ELSE
            StopVol = 0
        ENDIF
       
        //Trampoline
        FOR i = 1 TO 2        // Close together
            IF ((ClimaxChurn[i] > 0 OR ClimaxUp[i] > 0) AND (ClimaxChurn > 0 OR ClimaxUp > 0)) AND ((Close[i] > Open[i] AND Close < Open) OR (Close[i] < Open[i] AND Close > Open)) THEN
                Trampoline = TrampolineValue * 1 / 4
                BREAK
            ELSE
                Trampoline = 0
            ENDIF
        NEXT
       
    ENDIF

    RETURN Volume COLOURED (0, 200, 200) AS “Volume (LBlue)”, LowVol COLOURED (255, 255, 0) AS “LowVol (Yellow Histo): Bottom & Top & UpTrend Cont”,ClimaxUp COLOURED (255, 0, 0) AS “Climax Up (Red Histo): Start UpTrend & Top & DownTrend Cont”, ClimaxDown COLOURED (255, 255, 255) AS “ClimaxDown (White Histo): Bottom & UpTrend Cont & Start Down Trend” , Churn  COLOURED (0, 155, 50) AS “Churn = HighVol@LowRange (Green Histo): Bottom & Top & Down Trend Cont”,ClimaxChurn COLOURED (255, 0, 255) AS “ClimaxChurn (Magenta Histo): Top & DownTrend Cont: Brearish”, Trampoline COLOURED (0, 0, 255) AS “Trampoline (DBlue Histo): Reversal”, StopVol COLOURED (0, 0, 0) AS “StopVol (Black Histo): Profit Taking”, AVVolume COLOURED (255, 0, 0) AS “AVVolume (Red Line)”

     

    #53707

    hola buenos días, ese código es de proreal? 

    Attachments:
    1. volumen-better.itf
    #53709

    Creo que si , eso pone en la pagina de la fuente , que indico arriba.

    #53710

    Gracias Antonio por el código….investigare como poder poner el vol dentro del precio

     

Viewing 4 posts - 1 through 4 (of 4 total)

Create your free account now and post your request to benefit from the help of the community
Register or