Buy Long Stocks in an consolidation with a solid uptrend (weekly)

i use it on weekly chart for lower noise
the valid trend is measured with the system quality number von van tharp
i used it to trade german extra stocks
i only wanna stocks with a total tradet volume (close * volume) of 3 mio euro (you can change this value)
no optimization needed
give every week just a few candidates but often that rocks

// Beispielcode Screener////////////////////////////////////////////////////////////////// Suche einen stabilen Trend von 100 Wochen bis 200 Wochen
ProfitSer = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA = Average[100](ProfitSer)
sqn = sqrt(100) * ProfitSMA / STD[100](ProfitSer)

ProfitSer1 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA1 = Average[104](ProfitSer1)
sqn1 = sqrt(104) * ProfitSMA1 / STD[104](ProfitSer1)

ProfitSer2 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA2 = Average[108](ProfitSer2)
sqn2 = sqrt(108) * ProfitSMA2 / STD[108](ProfitSer2)

ProfitSer3 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA3 = Average[112](ProfitSer3)
sqn3 = sqrt(112) * ProfitSMA3 / STD[112](ProfitSer3)

ProfitSer4 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA4 = Average[116](ProfitSer4)
sqn4 = sqrt(116) * ProfitSMA4 / STD[116](ProfitSer4)

ProfitSer5 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA5 = Average[120](ProfitSer5)
sqn5 = sqrt(120) * ProfitSMA5 / STD[120](ProfitSer5)

ProfitSer6 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA6 = Average[124](ProfitSer6)
sqn6 = sqrt(124) * ProfitSMA6 / STD[124](ProfitSer6)

ProfitSer7 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA7 = Average[128](ProfitSer7)
sqn7 = sqrt(100) * ProfitSMA7 / STD[128](ProfitSer7)

ProfitSer8 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA8 = Average[132](ProfitSer8)
sqn8 = sqrt(100) * ProfitSMA8 / STD[132](ProfitSer8)

ProfitSer9 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA9 = Average[136](ProfitSer9)
sqn9 = sqrt(136) * ProfitSMA9 / STD[136](ProfitSer9)

ProfitSer10 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA10 = Average[140](ProfitSer10)
sqn10 = sqrt(140) * ProfitSMA10 / STD[140](ProfitSer10)

ProfitSer11 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA11 = Average[144](ProfitSer11)
sqn11 = sqrt(144) * ProfitSMA11 / STD[144](ProfitSer11)

ProfitSer12 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA12 = Average[148](ProfitSer12)
sqn12 = sqrt(148) * ProfitSMA12 / STD[148](ProfitSer12)

ProfitSer13 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA13 = Average[152](ProfitSer13)
sqn13 = sqrt(152) * ProfitSMA13 / STD[152](ProfitSer13)

ProfitSer14 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA14 = Average[156](ProfitSer14)
sqn14 = sqrt(156) * ProfitSMA14 / STD[156](ProfitSer14)

ProfitSer15 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA15 = Average[160](ProfitSer15)
sqn15 = sqrt(160) * ProfitSMA15 / STD[160](ProfitSer15)

ProfitSer16 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA16 = Average[164](ProfitSer16)
sqn16 = sqrt(164) * ProfitSMA16 / STD[164](ProfitSer16)

ProfitSer17 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA17 = Average[168](ProfitSer17)
sqn17 = sqrt(168) * ProfitSMA17 / STD[168](ProfitSer17)

ProfitSer18 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA18 = Average[172](ProfitSer18)
sqn18 = sqrt(172) * ProfitSMA18 / STD[172](ProfitSer18)

ProfitSer19 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA19 = Average[176](ProfitSer19)
sqn19 = sqrt(176) * ProfitSMA19 / STD[176](ProfitSer19)

ProfitSer20 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA20 = Average[180](ProfitSer20)
sqn20 = sqrt(180) * ProfitSMA20 / STD[1180](ProfitSer20)

ProfitSer21 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA21 = Average[184](ProfitSer21)
sqn21 = sqrt(184) * ProfitSMA21 / STD[184](ProfitSer21)

ProfitSer22 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA22 = Average[188](ProfitSer22)
sqn22 = sqrt(188) * ProfitSMA22 / STD[188](ProfitSer22)

ProfitSer23 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA23 = Average[192](ProfitSer23)
sqn23 = sqrt(192) * ProfitSMA23 / STD[192](ProfitSer23)

ProfitSer24 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA24 = Average[196](ProfitSer24)
sqn24 = sqrt(196) * ProfitSMA24 / STD[196](ProfitSer24)

ProfitSer25 = ROC[1](Close)
//Bar = Barindex - 1
ProfitSMA25 = Average[200](ProfitSer12)
sqn25 = sqrt(200) * ProfitSMA25 / STD[200](ProfitSer25)
// 25 Variablen werden nach einem SQN über 2.5 abgetastet
c0 = sqn > 2.0
c1 = sqn1 > 2.0
c2 = sqn2 > 2.0
c3 = sqn3 > 2.0
c4 = sqn4 > 2.0
c5 = sqn5 > 2.0
c6 = sqn6 > 2.0
c7 = sqn7 > 2.0
c8 = sqn8 > 2.0
c9 = sqn9 > 2.0
c10 = sqn10 > 2.0
c11 = sqn11 > 2.0
c12 = sqn12 > 2.0
c13 = sqn13 > 2.0
c14 = sqn14 > 2.0
c15 = sqn15 > 2.0
c16 = sqn16 > 2.0
c17 = sqn17 > 2.0
c18 = sqn18 > 2.0
c19 = sqn19 > 2.0
c20 = sqn20 > 2.0
c21 = sqn21 > 2.0
c22 = sqn22 > 2.0
c23 = sqn23 > 2.0
c24 = sqn24 > 2.0
c25 = sqn25 > 2.0
// Einer der 25 Variablen musst über 2.5 liegen
c25 = c0 or c1 or c2 or c3 or c4 or c5 or c6 or c7 or c8 or c9 or c10 or c11 or c12 or c13 or c14 or c15 or c16 or c17 or c18 or c19 or c20 or c21 or c22 or c23 or c24 or c25
// Penny Stock Filter
c26 = close > 1.0
// Ausverkauf
c27 = RSI[2](close) < 10
//Ausverkauf muss heute oder gestern stattgefunden haben
// Volumenfilter 3 Mio Handelsvolumen  eines S-Dax Wertes
c29 = Average[52](volume*close) > 3000000
c30 = close > Average[50](close)
c31 = Average[50](close) > Average[50](close)[1]
SCREENER[c25 and c26 and c27 and c29 and c30 and c31] sort by volume*close

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

// Beispielcode Screener////////////////////////////////////////////////////////////////// Suche einen stabilen Trend von 100 Wochen bis 200 Wochen

ProfitSer = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA = Average[100](ProfitSer)

sqn = sqrt(100) * ProfitSMA / STD[100](ProfitSer)

ProfitSer1 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA1 = Average[104](ProfitSer1)

sqn1 = sqrt(104) * ProfitSMA1 / STD[104](ProfitSer1)

ProfitSer2 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA2 = Average[108](ProfitSer2)

sqn2 = sqrt(108) * ProfitSMA2 / STD[108](ProfitSer2)

ProfitSer3 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA3 = Average[112](ProfitSer3)

sqn3 = sqrt(112) * ProfitSMA3 / STD[112](ProfitSer3)

ProfitSer4 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA4 = Average[116](ProfitSer4)

sqn4 = sqrt(116) * ProfitSMA4 / STD[116](ProfitSer4)

ProfitSer5 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA5 = Average[120](ProfitSer5)

sqn5 = sqrt(120) * ProfitSMA5 / STD[120](ProfitSer5)

ProfitSer6 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA6 = Average[124](ProfitSer6)

sqn6 = sqrt(124) * ProfitSMA6 / STD[124](ProfitSer6)

ProfitSer7 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA7 = Average[128](ProfitSer7)

sqn7 = sqrt(100) * ProfitSMA7 / STD[128](ProfitSer7)

ProfitSer8 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA8 = Average[132](ProfitSer8)

sqn8 = sqrt(100) * ProfitSMA8 / STD[132](ProfitSer8)

ProfitSer9 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA9 = Average[136](ProfitSer9)

sqn9 = sqrt(136) * ProfitSMA9 / STD[136](ProfitSer9)

ProfitSer10 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA10 = Average[140](ProfitSer10)

sqn10 = sqrt(140) * ProfitSMA10 / STD[140](ProfitSer10)

ProfitSer11 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA11 = Average[144](ProfitSer11)

sqn11 = sqrt(144) * ProfitSMA11 / STD[144](ProfitSer11)

ProfitSer12 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA12 = Average[148](ProfitSer12)

sqn12 = sqrt(148) * ProfitSMA12 / STD[148](ProfitSer12)

ProfitSer13 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA13 = Average[152](ProfitSer13)

sqn13 = sqrt(152) * ProfitSMA13 / STD[152](ProfitSer13)

ProfitSer14 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA14 = Average[156](ProfitSer14)

sqn14 = sqrt(156) * ProfitSMA14 / STD[156](ProfitSer14)

ProfitSer15 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA15 = Average[160](ProfitSer15)

sqn15 = sqrt(160) * ProfitSMA15 / STD[160](ProfitSer15)

ProfitSer16 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA16 = Average[164](ProfitSer16)

sqn16 = sqrt(164) * ProfitSMA16 / STD[164](ProfitSer16)

ProfitSer17 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA17 = Average[168](ProfitSer17)

sqn17 = sqrt(168) * ProfitSMA17 / STD[168](ProfitSer17)

ProfitSer18 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA18 = Average[172](ProfitSer18)

sqn18 = sqrt(172) * ProfitSMA18 / STD[172](ProfitSer18)

ProfitSer19 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA19 = Average[176](ProfitSer19)

sqn19 = sqrt(176) * ProfitSMA19 / STD[176](ProfitSer19)

ProfitSer20 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA20 = Average[180](ProfitSer20)

sqn20 = sqrt(180) * ProfitSMA20 / STD[1180](ProfitSer20)

ProfitSer21 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA21 = Average[184](ProfitSer21)

sqn21 = sqrt(184) * ProfitSMA21 / STD[184](ProfitSer21)

ProfitSer22 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA22 = Average[188](ProfitSer22)

sqn22 = sqrt(188) * ProfitSMA22 / STD[188](ProfitSer22)

ProfitSer23 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA23 = Average[192](ProfitSer23)

sqn23 = sqrt(192) * ProfitSMA23 / STD[192](ProfitSer23)

ProfitSer24 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA24 = Average[196](ProfitSer24)

sqn24 = sqrt(196) * ProfitSMA24 / STD[196](ProfitSer24)

ProfitSer25 = ROC[1](Close)

//Bar = Barindex - 1

ProfitSMA25 = Average[200](ProfitSer12)

sqn25 = sqrt(200) * ProfitSMA25 / STD[200](ProfitSer25)

// 25 Variablen werden nach einem SQN über 2.5 abgetastet

c0 = sqn > 2.0

c1 = sqn1 > 2.0

c2 = sqn2 > 2.0

c3 = sqn3 > 2.0

c4 = sqn4 > 2.0

c5 = sqn5 > 2.0

c6 = sqn6 > 2.0

c7 = sqn7 > 2.0

c8 = sqn8 > 2.0

c9 = sqn9 > 2.0

c10 = sqn10 > 2.0

c11 = sqn11 > 2.0

c12 = sqn12 > 2.0

c13 = sqn13 > 2.0

c14 = sqn14 > 2.0

c15 = sqn15 > 2.0

c16 = sqn16 > 2.0

c17 = sqn17 > 2.0

c18 = sqn18 > 2.0

c19 = sqn19 > 2.0

c20 = sqn20 > 2.0

c21 = sqn21 > 2.0

c22 = sqn22 > 2.0

c23 = sqn23 > 2.0

c24 = sqn24 > 2.0

c25 = sqn25 > 2.0

// Einer der 25 Variablen musst über 2.5 liegen

c25 = c0 or c1 or c2 or c3 or c4 or c5 or c6 or c7 or c8 or c9 or c10 or c11 or c12 or c13 or c14 or c15 or c16 or c17 or c18 or c19 or c20 or c21 or c22 or c23 or c24 or c25

// Penny Stock Filter

c26 = close > 1.0

// Ausverkauf

c27 = RSI[2](close) < 10

//Ausverkauf muss heute oder gestern stattgefunden haben

// Volumenfilter 3 Mio Handelsvolumen eines S-Dax Wertes

c29 = Average[52](volume*close) > 3000000

c30 = close > Average[50](close)

c31 = Average[50](close) > Average[50](close)[1]

SCREENER[c25 and c26 and c27 and c29 and c30 and c31] sort by volume*close

consolidation stock market stocks strong stocks van tharp

Risk disclosure:

No information on this site is investment advice or a solicitation to buy or sell any financial instrument. Past performance is not indicative of future results. Trading may expose you to risk of loss greater than your deposits and is only suitable for experienced investors who have sufficient financial means to bear such risk.

ProRealTime ITF files and other attachments :

Filename : download the ITF files

How to import ITF files into ProRealTime platform?

Find other exclusive trading pro-tools on

PRC is also on YouTube, subscribe to our channel for exclusive content and tutorials


Mully • 05/07/2018 #
Bonjour,
est ce que quelqu’un sait comment ajouter les niveaux de résistances / supports sur le côté gauche ? Les barres latérales qui sont de couleur grise. Est ce un codage à intégrer ou alors, est ce un simple ajout dans pro real time ? Merci d’avance
- Nicolas • 05/07/2018 #
  Il s’agit de l’indicateur “volume par niveau de prix” disponible par défaut dans la plateforme.

Lyam Pareil ne marche pas dommage

ahmedbouaziz89 Bonjour, quand j'ajoute le code ou le fichier dans l'outils screeners de Prorealtime je ne v...

tyvix Bonjour le code marche bien c est juste qu'il n y a pas d opportunité au moment ou vous le...

Julio Hi Doctrading, Is it possible to flip this to a "going bearish" by simply switching the cod...

Doctrading Hello, Yes, you can do it very simply...

Tarek Laaroussi Hi doctrading i am the one who sent you the email first thanks for the code . It really wo...

pata_tony Hi, i'm not able to see the indicator. Could you please help me? Thanks

Nicolas This is not an indicator but a screener, to be used with the ProScreener module.

JOKAMAURICE Le programme ne se charge pas dans PRT

RobHansson Thanks for this screener. I would like the tool removed the shares that have been on the lis...

davidspain hello doctor!! amazing job. I would like to ask u if it is possible to create an indicator ...

GABRIELE1976 bonjour, je voudrais utiliser ce screener pour trouver les titres qui, à l’ouverture de la j...

jbox Bonjour, Je souhaite affiché affiché les gap sur le graph des prix directement J'a...

owes29 Hi what do you find are the best settings for intraday trading regards Lee

rille66 Hi doctrading. If you wan't to change the screener to register the gap open in realtime so y...

EAxelsson Hi, shouldn´t it be or instead of and? if FiftyTwoWeekHigh = FiftyTwoWeekHigh[1] OR FiftyTwo...

qigley Line 4 has a redundant term "Close>EMA2." is not necessary as EMA2 will always be less t...

Mike.44 Thanks It a good job !

Share this

Likes