ProScreener. Prolongación de Soporte en Pivot Trendlines with BreaksHG

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #261951 quote
    Maricarmen
    Participant
    Senior

    Buenas Tardes:

    Sería posible confeccionar el Screener que recogiese la prolongación del soporte de la imagen que proporciono ( en realidad es la misma). Lo que pasa es que una recoge el Soporte en una Linea Roja con continuación en puntos en rojo.

    Y la otra esta toda como si fuese una Linea discontinua Verde, en esta pido lo mismo, lo que ocurre es que la prolongación se proyectaría a partir del toque al segundo soporte. Soy consciente que tienen que pasar unas pocas velas para que el gráfico recoja dicha Linea.

    Me estoy refiriendo al indicador: https://www.tradingview.com/script/0ecaiSnU-Pivot-Trendlines-with-Breaks-HG/

    Muchísimas Gracias.

    SABADELL-15´-1.png SABADELL-15´-1.png SABADELL-15.png SABADELL-15.png
    #261988 quote
    Iván González
    Moderator
    Legend

    Buenas. Aquí tienes un buscador que localiza valores cercanos a la linea de tendencia.

    //----------------------------------------------
    //PRC_Pivot Trendlines with Breaks - Screener
    //version = 1
    //15.06.2026
    //Ivan Gonzalez @ www.prorealcode.com
    //Sharing ProRealTime knowledge
    //----------------------------------------------
    // Vela cerca de la prolongacion del soporte ascendente (pivots low).
    //----------------------------------------------
    
    PivotLen = 20
    repaint  = 0
    tolPct   = 0.3    // tolerancia de cercania, en % del precio
    
    //--- Pivots low
    IF low[repaint*PivotLen+1] = lowest[repaint*PivotLen+PivotLen+1](low) THEN
       $ply[z] = low[repaint*PivotLen+1]
       $plx[z] = barindex-(repaint*PivotLen+1)
       z = z+1
    ENDIF
    
    y2 = $ply[max(z-1,1)]
    x2 = $plx[max(z-1,1)]
    y1 = $ply[max(z-2,1)]
    x1 = $plx[max(z-2,1)]
    xl = barindex
    yl = y1+(xl-x1)*(y2-y1)/(x2-x1)
    
    //--- Soporte ascendente vigente + vela cerca de la linea, sin haberla roto
    ascending = y2 > y1
    tol       = close*tolPct/100
    nearLine  = abs(low - yl) <= tol
    aboveLine = close >= yl
    
    SCREENER[ascending AND nearLine AND aboveLine](yl AS "Soporte", low AS "Minimo", close AS "Cierre")
    


Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

ProScreener. Prolongación de Soporte en Pivot Trendlines with BreaksHG


ProScreener: Buscadores de Mercado y Rastreo

New Reply
Author
author-avatar
Maricarmen @maricarmen Participant
Summary

This topic contains 1 reply,
has 2 voices, and was last updated by Iván González
3 days, 15 hours ago.

Topic Details
Forum: ProScreener: Buscadores de Mercado y Rastreo
Language: Spanish
Started: 06/14/2026
Status: Active
Attachments: 2 files
Logo Logo
Loading...