Indicatore Fibonacci Structure Engine di TradingView in ProRealTime

ecco qui:

//----------------------------------------------------------
// PRC_FIBONACCI STRUCTURE ENGINE
// Original: WillyAlgoTrader (PineScript v6)
// version = 1
// 25.03.2026
// Iván González @ www.prorealcode.com
// Sharing ProRealTime knowledge
//----------------------------------------------------------
defparam drawonlastbaronly = true
// ═══════════════════════════════════════
// SETTINGS
// ═══════════════════════════════════════
// ── Main ──
swingLen = 10       // Swing Detection Length (3-50)
useATRFilt = 1      // ATR Swing Filter: 1=ON, 0=OFF
atrMult = 0.5       // ATR Filter Multiplier (0.1-3.0)
cooldownBars = 5    // Signal Cooldown in bars (1-50)
// ── Fibonacci Levels (1=Show, 0=Hide) ──
showFib = 1         // Master toggle Fibonacci
fibExtBars = 20     // Extension bars to the right (5-100)
showFib236 = 0      // 0.236 level
showFib382 = 1      // 0.382 level
showFib500 = 1      // 0.500 level
showFib618 = 1      // 0.618 level
showFib786 = 1      // 0.786 level
showFibTgt = 1      // Target (-0.618)
showFibT50 = 1      // -0.5 level
confTol = 0.3       // Confluence ATR Tolerance (0.05-1.0)
// ── Structure & Display (1=ON, 0=OFF) ──
showStruct = 1      // Show BOS / CHoCH
showSwings = 1      // Show Swing Labels (HH/HL/LH/LL)
showEngulf = 1      // Show Engulfing Signals
showSignals = 0     // Show Buy/Sell Signals
showDash = 1        // Show Dashboard
// ═══════════════════════════════════════
// INITIALIZATION
// ═══════════════════════════════════════
once swHigh1 = 0
once swHigh1X = -1
once swHigh2 = 0
once swHigh2X = -1
once swLow1 = 0
once swLow1X = -1
once swLow2 = 0
once swLow2X = -1

once structBias = 0
once lastBrkHigh = -1
once lastBrkLow = -1

once fibHigh = 0
once fibHighX = -1
once fibLow = 0
once fibLowX = -1
once fibHighLive = 0
once fibLowLive = 0

once barsSinceBuy = 999
once barsSinceSell = 999

// Buffer counters
once swLblCnt = 0
once bosCnt = 0
once engCnt = 0
once sigBuyCnt = 0
once sigSellCnt = 0

maxSwLbl = 10
maxBos = 5
maxEng = 5
maxSig = 3

// ═══════════════════════════════════════
// CORE CALCULATIONS
// ═══════════════════════════════════════
atrLen = 14
atrVal = averagetruerange[atrLen]
warmupBars = max(swingLen * 3, 50)
prdWin = 2 * swingLen + 1

// ═══════════════════════════════════════
// PIVOT DETECTION (ATR-filtered)
// ═══════════════════════════════════════
newSwHigh = 0
newSwLow = 0

if barindex >= prdWin then
   // ── Pivot High ──
   if high[swingLen] = highest[prdWin](high) then
      ph = high[swingLen]
      phx = barindex - swingLen
      if useATRFilt = 1 then
         minSzH = atrVal * atrMult
      else
         minSzH = 0
      endif
      if swLow1X = -1 then
         passH = 1
      else
         if ph - swLow1 >= minSzH then
            passH = 1
         else
            passH = 0
         endif
      endif
      if passH = 1 then
         swHigh2 = swHigh1
         swHigh2X = swHigh1X
         swHigh1 = ph
         swHigh1X = phx
         newSwHigh = 1
      endif
   endif
   // ── Pivot Low ──
   if low[swingLen] = lowest[prdWin](low) then
      pl = low[swingLen]
      plx = barindex - swingLen
      if useATRFilt = 1 then
         minSzL = atrVal * atrMult
      else
         minSzL = 0
      endif
      if swHigh1X = -1 then
         passL = 1
      else
         if swHigh1 - pl >= minSzL then
            passL = 1
         else
            passL = 0
         endif
      endif
      if passL = 1 then
         swLow2 = swLow1
         swLow2X = swLow1X
         swLow1 = pl
         swLow1X = plx
         newSwLow = 1
      endif
   endif
endif

// ═══════════════════════════════════════
// SWING LABEL CLASSIFICATION & BUFFER
// ═══════════════════════════════════════
// Swing highs: HH (type=1) or LH (type=3)
if newSwHigh = 1 and swHigh2X > -1 and barindex >= warmupBars then
   if swHigh1 > swHigh2 then
      swT = 1
   else
      swT = 3
   endif
   if swLblCnt < maxSwLbl then
      $swLblX[swLblCnt] = swHigh1X
      $swLblY[swLblCnt] = swHigh1
      $swLblT[swLblCnt] = swT
      swLblCnt = swLblCnt + 1
   else
      for si = 0 to maxSwLbl - 2 do
         $swLblX[si] = $swLblX[si + 1]
         $swLblY[si] = $swLblY[si + 1]
         $swLblT[si] = $swLblT[si + 1]
      next
      $swLblX[maxSwLbl - 1] = swHigh1X
      $swLblY[maxSwLbl - 1] = swHigh1
      $swLblT[maxSwLbl - 1] = swT
   endif
endif

// Swing lows: HL (type=2) or LL (type=4)
if newSwLow = 1 and swLow2X > -1 and barindex >= warmupBars then
   if swLow1 > swLow2 then
      swT = 2
   else
      swT = 4
   endif
   if swLblCnt < maxSwLbl then
      $swLblX[swLblCnt] = swLow1X
      $swLblY[swLblCnt] = swLow1
      $swLblT[swLblCnt] = swT
      swLblCnt = swLblCnt + 1
   else
      for si = 0 to maxSwLbl - 2 do
         $swLblX[si] = $swLblX[si + 1]
         $swLblY[si] = $swLblY[si + 1]
         $swLblT[si] = $swLblT[si + 1]
      next
      $swLblX[maxSwLbl - 1] = swLow1X
      $swLblY[maxSwLbl - 1] = swLow1
      $swLblT[maxSwLbl - 1] = swT
   endif
endif

// ═══════════════════════════════════════
// STRUCTURE DETECTION (BOS / CHoCH)
// ═══════════════════════════════════════
isBOS = 0
isCHoCH = 0
isBullBrk = 0
isBearBrk = 0

// ── Bullish break: close > swHigh1 ──
if swHigh1X > -1 and barindex >= warmupBars then
   if close > swHigh1 then
      brkNewH = 0
      if lastBrkHigh = -1 then
         brkNewH = 1
      elsif swHigh1 <> lastBrkHigh then
         brkNewH = 1
      endif
      if brkNewH = 1 then
         if structBias <= 0 then
            isCHoCH = 1
         else
            isBOS = 1
         endif
         structBias = 1
         isBullBrk = 1
         lastBrkHigh = swHigh1
      endif
   endif
endif

// ── Bearish break: close < swLow1 ──
if swLow1X > -1 and barindex >= warmupBars then
   if close < swLow1 then
      brkNewL = 0
      if lastBrkLow = -1 then
         brkNewL = 1
      elsif swLow1 <> lastBrkLow then
         brkNewL = 1
      endif
      if brkNewL = 1 then
         if structBias >= 0 then
            isCHoCH = 1
         else
            isBOS = 1
         endif
         structBias = -1
         isBearBrk = 1
         lastBrkLow = swLow1
      endif
   endif
endif

// ── Store BOS/CHoCH in buffer ──
if isBOS = 1 or isCHoCH = 1 then
   if isBullBrk = 1 then
      brkPrice = swHigh1
      brkStartX = swHigh1X
   else
      brkPrice = swLow1
      brkStartX = swLow1X
   endif
   brkEndX = barindex
   if isCHoCH = 1 then
      brkType = 2
   else
      brkType = 1
   endif
   if isBullBrk = 1 then
      brkDir = 1
   else
      brkDir = -1
   endif
   if bosCnt < maxBos then
      $bosStartX[bosCnt] = brkStartX
      $bosEndX[bosCnt] = brkEndX
      $bosPrice[bosCnt] = brkPrice
      $bosType[bosCnt] = brkType
      $bosDir[bosCnt] = brkDir
      bosCnt = bosCnt + 1
   else
      for si = 0 to maxBos - 2 do
         $bosStartX[si] = $bosStartX[si + 1]
         $bosEndX[si] = $bosEndX[si + 1]
         $bosPrice[si] = $bosPrice[si + 1]
         $bosType[si] = $bosType[si + 1]
         $bosDir[si] = $bosDir[si + 1]
      next
      $bosStartX[maxBos - 1] = brkStartX
      $bosEndX[maxBos - 1] = brkEndX
      $bosPrice[maxBos - 1] = brkPrice
      $bosType[maxBos - 1] = brkType
      $bosDir[maxBos - 1] = brkDir
   endif
endif

// ═══════════════════════════════════════
// FIBONACCI ANCHORS
// ═══════════════════════════════════════
// On bullish break: top = current high (live trail), bottom = swLow1 (locked)
if isBullBrk = 1 then
   fibHigh = high
   fibHighX = barindex
   fibLow = swLow1
   fibLowX = swLow1X
   fibHighLive = 1
   fibLowLive = 0
endif

// On bearish break: bottom = current low (live trail), top = swHigh1 (locked)
if isBearBrk = 1 then
   fibLow = low
   fibLowX = barindex
   fibHigh = swHigh1
   fibHighX = swHigh1X
   fibLowLive = 1
   fibHighLive = 0
endif

// Trail live edge as price extends
if isBullBrk = 0 and isBearBrk = 0 then
   if fibHighLive = 1 and fibHighX > -1 then
      if high > fibHigh then
         fibHigh = high
         fibHighX = barindex
      endif
   endif
   if fibLowLive = 1 and fibLowX > -1 then
      if low < fibLow then
         fibLow = low
         fibLowX = barindex
      endif
   endif
endif

// Lock live edge on confirmed pivot (not on break bar)
if isBullBrk = 0 and isBearBrk = 0 then
   if newSwHigh = 1 and fibHighLive = 1 and swHigh1X > -1 then
      fibHigh = swHigh1
      fibHighX = swHigh1X
      fibHighLive = 0
   endif
   if newSwLow = 1 and fibLowLive = 1 and swLow1X > -1 then
      fibLow = swLow1
      fibLowX = swLow1X
      fibLowLive = 0
   endif
   // Update locked anchors on new confirmed swings
   if newSwHigh = 1 and fibHighLive = 0 and fibHighX > -1 then
      if swHigh1 <> fibHigh then
         fibHigh = swHigh1
         fibHighX = swHigh1X
      endif
   endif
   if newSwLow = 1 and fibLowLive = 0 and fibLowX > -1 then
      if swLow1 <> fibLow then
         fibLow = swLow1
         fibLowX = swLow1X
      endif
   endif
endif

// ═══════════════════════════════════════
// FIBONACCI PRICE LEVELS
// ═══════════════════════════════════════
fibValid = 0
fib236 = 0
fib382 = 0
fib500 = 0
fib618 = 0
fib786 = 0
fibTgt50 = 0
fibTgt618 = 0

if fibHighX > -1 and fibLowX > -1 and fibHigh > fibLow then
   fibValid = 1
   fibRng = fibHigh - fibLow
   fib236 = fibHigh - fibRng * 0.236
   fib382 = fibHigh - fibRng * 0.382
   fib500 = fibHigh - fibRng * 0.500
   fib618 = fibHigh - fibRng * 0.618
   fib786 = fibHigh - fibRng * 0.786
   // Extensions: direction depends on structure bias
   if structBias >= 0 then
      // Bullish: targets above fibHigh
      fibTgt50 = fibHigh + fibRng * 0.5
      fibTgt618 = fibHigh + fibRng * 0.618
   else
      // Bearish: targets below fibLow
      fibTgt50 = fibLow - fibRng * 0.5
      fibTgt618 = fibLow - fibRng * 0.618
   endif
endif

// ═══════════════════════════════════════
// PREMIUM / DISCOUNT
// ═══════════════════════════════════════
inPremium = 0
inDiscount = 0
if fibValid = 1 then
   if close > fib500 then
      inPremium = 1
   else
      inDiscount = 1
   endif
endif

// ═══════════════════════════════════════
// CONFLUENCE SCORING (weighted)
// ═══════════════════════════════════════
if atrVal > 0 then
   confDist = atrVal * confTol
else
   confDist = 0.001
endif

confWeight = 0.0
if fibValid = 1 then
   if showFib236 = 1 and abs(close - fib236) <= confDist then
      confWeight = confWeight + 1.0
   endif
   if abs(close - fib382) <= confDist then
      confWeight = confWeight + 1.5
   endif
   if abs(close - fib500) <= confDist then
      confWeight = confWeight + 2.0
   endif
   if abs(close - fib618) <= confDist then
      confWeight = confWeight + 2.5
   endif
   if abs(close - fib786) <= confDist then
      confWeight = confWeight + 1.5
   endif
endif
// Swing level confluence
if swHigh1X > -1 and abs(close - swHigh1) <= confDist then
   confWeight = confWeight + 1.0
endif
if swLow1X > -1 and abs(close - swLow1) <= confDist then
   confWeight = confWeight + 1.0
endif

confScore = min(confWeight * 10, 100)

// ═══════════════════════════════════════
// ENGULFING PATTERN DETECTION
// ═══════════════════════════════════════
bodySize = max(close, open) - min(close, open)
bodyAvg = average[14, 1](bodySize)

bearEngulf = 0
if close < open then
   if bodySize > bodyAvg then
      if close[1] > open[1] then
         if bodySize[1] < bodyAvg[1] then
            if close <= open[1] and open >= close[1] then
               if close < open[1] or open > close[1] then
                  bearEngulf = 1
               endif
            endif
         endif
      endif
   endif
endif

bullEngulf = 0
if close > open then
   if bodySize > bodyAvg then
      if close[1] < open[1] then
         if bodySize[1] < bodyAvg[1] then
            if close >= open[1] and open <= close[1] then
               if close > open[1] or open < close[1] then
                  bullEngulf = 1
               endif
            endif
         endif
      endif
   endif
endif

// Context filter: premium/discount or confluence
bearEngCtx = 0
if bearEngulf = 1 and barindex >= warmupBars then
   if inPremium = 1 or confWeight >= 1.5 then
      bearEngCtx = 1
   endif
endif

bullEngCtx = 0
if bullEngulf = 1 and barindex >= warmupBars then
   if inDiscount = 1 or confWeight >= 1.5 then
      bullEngCtx = 1
   endif
endif

// ── Store engulfing in buffer ──
if bearEngCtx = 1 then
   if engCnt < maxEng then
      $engX[engCnt] = barindex
      $engY[engCnt] = high
      $engDir[engCnt] = -1
      engCnt = engCnt + 1
   else
      for si = 0 to maxEng - 2 do
         $engX[si] = $engX[si + 1]
         $engY[si] = $engY[si + 1]
         $engDir[si] = $engDir[si + 1]
      next
      $engX[maxEng - 1] = barindex
      $engY[maxEng - 1] = high
      $engDir[maxEng - 1] = -1
   endif
endif

if bullEngCtx = 1 then
   if engCnt < maxEng then
      $engX[engCnt] = barindex
      $engY[engCnt] = low
      $engDir[engCnt] = 1
      engCnt = engCnt + 1
   else
      for si = 0 to maxEng - 2 do
         $engX[si] = $engX[si + 1]
         $engY[si] = $engY[si + 1]
         $engDir[si] = $engDir[si + 1]
      next
      $engX[maxEng - 1] = barindex
      $engY[maxEng - 1] = low
      $engDir[maxEng - 1] = 1
   endif
endif

// ═══════════════════════════════════════
// SIGNAL LOGIC (with cooldown)
// ═══════════════════════════════════════
barsSinceBuy = barsSinceBuy + 1
barsSinceSell = barsSinceSell + 1

buyRaw = 0
sellRaw = 0

// Buy: bullish engulfing + bias + confluence, OR bullish CHoCH
if bullEngCtx = 1 and structBias = 1 and confWeight >= 1.5 then
   buyRaw = 1
endif
if isCHoCH = 1 and isBullBrk = 1 then
   buyRaw = 1
endif

// Sell: bearish engulfing + bias + confluence, OR bearish CHoCH
if bearEngCtx = 1 and structBias = -1 and confWeight >= 1.5 then
   sellRaw = 1
endif
if isCHoCH = 1 and isBearBrk = 1 then
   sellRaw = 1
endif

// Apply cooldown
confBuy = 0
confSell = 0
if buyRaw = 1 and barsSinceBuy >= cooldownBars then
   confBuy = 1
   barsSinceBuy = 0
endif
if sellRaw = 1 and barsSinceSell >= cooldownBars then
   confSell = 1
   barsSinceSell = 0
endif

// ── Store signals in buffer ──
if confBuy = 1 then
   if sigBuyCnt < maxSig then
      $sigBuyX[sigBuyCnt] = barindex
      $sigBuyY[sigBuyCnt] = low
      sigBuyCnt = sigBuyCnt + 1
   else
      for si = 0 to maxSig - 2 do
         $sigBuyX[si] = $sigBuyX[si + 1]
         $sigBuyY[si] = $sigBuyY[si + 1]
      next
      $sigBuyX[maxSig - 1] = barindex
      $sigBuyY[maxSig - 1] = low
   endif
endif

if confSell = 1 then
   if sigSellCnt < maxSig then
      $sigSellX[sigSellCnt] = barindex
      $sigSellY[sigSellCnt] = high
      sigSellCnt = sigSellCnt + 1
   else
      for si = 0 to maxSig - 2 do
         $sigSellX[si] = $sigSellX[si + 1]
         $sigSellY[si] = $sigSellY[si + 1]
      next
      $sigSellX[maxSig - 1] = barindex
      $sigSellY[maxSig - 1] = high
   endif
endif

// ═══════════════════════════════════════════════════
// DRAWING (all inside islastbarupdate)
// ═══════════════════════════════════════════════════
if islastbarupdate then
   atrOff = atrVal * 0.3
   
   // ── SWING LABELS (HH/HL/LH/LL) ──
   if showSwings = 1 and swLblCnt > 0 then
      for i = 0 to swLblCnt - 1 do
         if $swLblT[i] = 1 then
            drawtext("HH", $swLblX[i], $swLblY[i] + atrOff) coloured(0, 230, 118)
         elsif $swLblT[i] = 2 then
            drawtext("HL", $swLblX[i], $swLblY[i] - atrOff) coloured(0, 230, 118)
         elsif $swLblT[i] = 3 then
            drawtext("LH", $swLblX[i], $swLblY[i] + atrOff) coloured(255, 82, 82)
         elsif $swLblT[i] = 4 then
            drawtext("LL", $swLblX[i], $swLblY[i] - atrOff) coloured(255, 82, 82)
         endif
      next
   endif
   
   // ── BOS / CHoCH LINES & LABELS ──
   if showStruct = 1 and bosCnt > 0 then
      for i = 0 to bosCnt - 1 do
         if $bosDir[i] = 1 then
            bR = 0
            bG = 230
            bB = 118
         else
            bR = 255
            bG = 82
            bB = 82
         endif
         drawsegment($bosStartX[i], $bosPrice[i], $bosEndX[i], $bosPrice[i]) coloured(bR, bG, bB) style(dottedline, 2)
         midX = round(($bosStartX[i] + $bosEndX[i]) / 2)
         if $bosDir[i] = 1 then
            lblOff = $bosPrice[i] + atrOff * 0.5
         else
            lblOff = $bosPrice[i] - atrOff * 0.5
         endif
         if $bosType[i] = 2 then
            drawtext("CHoCH", midX, lblOff) coloured(bR, bG, bB)
         else
            drawtext("BOS", midX, lblOff) coloured(bR, bG, bB)
         endif
      next
   endif
   
   // ── FIBONACCI LEVELS ──
   if showFib = 1 and fibValid = 1 then
      rightEdge = barindex + fibExtBars
      
      // Reference line (diagonal from swing low to swing high)
      drawsegment(fibLowX, fibLow, fibHighX, fibHigh) coloured(100, 150, 200) style(dottedline, 1)
      
      // Golden zone box (0.500 – 0.786)
      drawrectangle(barindex, fib500, rightEdge, fib786) coloured(255, 214, 0) fillcolor(255, 214, 0, 30)
      
      // Individual levels
      if showFib236 = 1 then
         drawsegment(barindex, fib236, rightEdge, fib236) coloured(100, 160, 220) style(dottedline, 1)
         drawtext("0.236", rightEdge, fib236) coloured(66, 165, 245)
      endif
      if showFib382 = 1 then
         drawsegment(barindex, fib382, rightEdge, fib382) coloured(80, 150, 220) style(dottedline, 1)
         drawtext("0.382", rightEdge, fib382) coloured(66, 165, 245)
      endif
      if showFib500 = 1 then
         drawsegment(barindex, fib500, rightEdge, fib500) coloured(66, 165, 245) style(dottedline, 2)
         drawtext("0.500", rightEdge, fib500) coloured(66, 165, 245)
      endif
      if showFib618 = 1 then
         drawsegment(barindex, fib618, rightEdge, fib618) coloured(66, 165, 245) style(line, 2)
         drawtext("0.618", rightEdge, fib618) coloured(66, 165, 245)
      endif
      if showFib786 = 1 then
         drawsegment(barindex, fib786, rightEdge, fib786) coloured(80, 150, 220) style(dottedline, 1)
         drawtext("0.786", rightEdge, fib786) coloured(66, 165, 245)
      endif
      
      // Target levels (direction-aware)
      if structBias >= 0 then
         tgtR = 0
         tgtG = 230
         tgtB = 118
         tgtR2 = 0
         tgtG2 = 180
         tgtB2 = 100
      else
         tgtR = 255
         tgtG = 82
         tgtB = 82
         tgtR2 = 200
         tgtG2 = 60
         tgtB2 = 60
      endif
      if showFibTgt = 1 then
         drawsegment(barindex, fibTgt618, rightEdge, fibTgt618) coloured(tgtR, tgtG, tgtB) style(dottedline, 2)
         drawtext("Target", rightEdge, fibTgt618) coloured(tgtR, tgtG, tgtB)
      endif
      if showFibT50 = 1 then
         drawsegment(barindex, fibTgt50, rightEdge, fibTgt50) coloured(tgtR2, tgtG2, tgtB2) style(dottedline, 1)
         drawtext("-0.5", rightEdge, fibTgt50) coloured(tgtR2, tgtG2, tgtB2)
      endif
      
      // Target zone box
      if showFibTgt = 1 or showFibT50 = 1 then
         drawrectangle(barindex, fibTgt50, rightEdge, fibTgt618) coloured(255, 214, 0) fillcolor(255, 214, 0, 30)
      endif
   endif
   
   // ── ENGULFING MARKERS ──
   if showEngulf = 1 and engCnt > 0 then
      for i = 0 to engCnt - 1 do
         if $engDir[i] = 1 then
            drawtext("▲", $engX[i], $engY[i] - atrOff) coloured(0, 230, 118)
         else
            drawtext("▼", $engX[i], $engY[i] + atrOff) coloured(255, 82, 82)
         endif
      next
   endif
   
   // ── BUY / SELL SIGNALS ──
   if showSignals = 1 then
      if sigBuyCnt > 0 then
         for i = 0 to sigBuyCnt - 1 do
            drawtext("BUY", $sigBuyX[i], $sigBuyY[i] - atrOff * 1.5) coloured(0, 230, 118)
         next
      endif
      if sigSellCnt > 0 then
         for i = 0 to sigSellCnt - 1 do
            drawtext("SELL", $sigSellX[i], $sigSellY[i] + atrOff * 1.5) coloured(255, 82, 82)
         next
      endif
   endif
   
   // ── DASHBOARD (simplified panel) ──
   if showDash = 1 then
      // Title
      drawtext("═ FibStructure ═", -200, -10) anchor(topright, xshift, yshift) coloured(200, 200, 200)
      
      // Trend
      if structBias > 0 then
         drawtext("Trend: Bullish", -200, -25) anchor(topright, xshift, yshift) coloured(0, 230, 118)
      elsif structBias < 0 then
         drawtext("Trend: Bearish", -200, -25) anchor(topright, xshift, yshift) coloured(255, 82, 82)
      else
         drawtext("Trend: Neutral", -200, -25) anchor(topright, xshift, yshift) coloured(150, 150, 150)
      endif
      
      // Signal
      if confBuy = 1 then
         drawtext("Signal: BUY", -200, -40) anchor(topright, xshift, yshift) coloured(0, 230, 118)
      elsif confSell = 1 then
         drawtext("Signal: SELL", -200, -40) anchor(topright, xshift, yshift) coloured(255, 82, 82)
      else
         drawtext("Signal: —", -200, -40) anchor(topright, xshift, yshift) coloured(150, 150, 150)
      endif
      
      // Confluence
      if confScore >= 60 then
         drawtext("Conf: Strong #confScore#", -200, -55) anchor(topright, xshift, yshift) coloured(0, 230, 118)
      elsif confScore >= 30 then
         drawtext("Conf: Moderate #confScore#", -200, -55) anchor(topright, xshift, yshift) coloured(255, 214, 0)
      elsif confScore > 0 then
         drawtext("Conf: Weak #confScore#", -200, -55) anchor(topright, xshift, yshift) coloured(200, 180, 80)
      else
         drawtext("Conf: None", -200, -55) anchor(topright, xshift, yshift) coloured(150, 150, 150)
      endif
      
      // Zone
      if inPremium = 1 then
         drawtext("Zone: Premium", -200, -70) anchor(topright, xshift, yshift) coloured(255, 82, 82)
      elsif inDiscount = 1 then
         drawtext("Zone: Discount", -200, -70) anchor(topright, xshift, yshift) coloured(0, 230, 118)
      else
         drawtext("Zone: —", -200, -70) anchor(topright, xshift, yshift) coloured(150, 150, 150)
      endif
      
      // Fib .618 value
      if fibValid = 1 then
         drawtext("Fib .618: #fib618#", -200, -85) anchor(topright, xshift, yshift) coloured(66, 165, 245)
      endif
   endif
endif

// ═══════════════════════════════════════
// RETURN — boolean outputs for alerts
// ═══════════════════════════════════════
return //confBuy as "Buy Signal", confSell as "Sell Signal", isBOS as "BOS", isCHoCH as "CHoCH"

I dati da stampare mi sembra siano già abilitati, in ogni caso nella tabella allegata puoi vedere le variabili che iniziano con SHOW che ho messo a 0 per non avere nessun dato visibile.

Se tu le metti ad 1, una per volta, vedrai quali sono i dati che ti possono interessare o meno.

Spero di avere interpretato correttamente la tua richiesta.

x.jpg

Occorre attendere la risposta di Ivan, non so perché manca quella freccia.